Klipsch RC-64 III User Manual

RC-64 III

CENTER CHANNEL

FINISH OPTIONS

Black Ash

Cherry

Walnut

DESIGNED AND MADE IN THE USA

USING DOMESTIC AND IMPORTED COMPONENTS

The Klipsch RC-64 III speaker is a testament to the quality that
Klipsch demands from each and every one of its audio products.
Remember great sound? We do, too. The RC-64 III enclosure is made
in the USA, by proud craftsmen in Hope, Arkansas. Just like Paul W.
Klipsch (PWK) intended.

NEW 1 3/4 TITANIUM DIAPHRAGM COMPRESSION DRIVER

The compression driver features a new phase plug design to
improve phase coherency at the throat of the horn, resulting in
improved sound pressure linearity at high frequencies.

90° x 90° TRACTRIX® HORN

The redesigned Tractrix horn utilizes a circular horn throat
paired to a square horn mouth to further improve high-frequency
response and extension, while enhancing imaging and dynamics.
The compressed molded rubber construction adds high frequency
damping to reduce harshness and improve detail. This creates the
cleanest, most natural sound possible.

SPUN COPPER CERAMETALLIC WOOFERS™

Cerametallic woofers represent the pinnacle of Klipsch driver
design, maintaining exceptional rigidity, and lightweight
construction, for minimal cone breakup and distortion. When
paired with the Tractrix horn-loaded compression driver, it
provides speaker efficiency highest in its class.

CAST FRAME WOOFER DESIGN

Each 6.5” woofer feature a heavy-duty cast aluminum frame for
resonant-free operation.

SPECIFICATIONS

FRE QU ENCY RE SP ONSE

POWER HANDLING 200W / 800W peak

SENSITIVITY

NOMINAL IMPEDANCE 8 ohms compatible

HIGH FREQUENCY HORN 6.25” square 90˚ x 90˚ Tractrix® Horn

HIGH FREQUENCY DRIVERS

CROSSOVER FREQUENCY 1,000 Hz & 1,400 Hz

LOW FREQUENCY DRIVERS Quad 6.5” (16.5cm) Cerametallic cone woofers

INPUTS Dual binding posts / bi-wire / bi-amp

ENCLOSURE TYPE

HEIGHT 8” (20.3cm)

WIDTH 35.8” (91cm)

DEPTH 15” (38.1cm)

WEIGHT

*

Sensitivity in average listening room

*

57–24kHz +/– 3dB

99 dB @ 2.83V / 1M

1.75” (4.45cm) titanium diaphragm compression driver

Sealed

55 Ibs (25kg)

2 1/2 WAY NETWORK CROSSOVER DESIGN

The sophisticated design of the RC-64 III network attenuates the
outer woofers output at higher frequencies to minimize horizontal
interference off-axis to the loudspeaker. This maintains a wide and
even sound distribution — ensuring each listener hears the center
channel information exactly as intended.

FURNITURE GRADE WOOD VENEERS

RC-64 III enclosures all utilize furniture grade wood veneers, and
are available in Black Ash, Cherry & Walnut.

3502 WOODVIEW TRACE INDIANAPOLIS, IN 46268 | KLIPSCH.COM

All specifi cations are subje ct to change witho ut notice. ©201 7 Klipsch Group, In c. Klipsch, Keep ers of the Sound and Trac trix

are registe red trademar ks of Klipsch Group, In c. a wholly-own ed subsidiar y of Voxx Internation al Corporati on.