Klipsch RC-52 Brochure

Dual 5.25" Center Channel Loudspeaker

RC-52

Because the center channel speaker reproduces
more than 60 percent of a movie soundtrack,
Klipsch spared no expense when developing the
Reference Series RC-52. With its ideal
combination of technology, performance and
design, this speaker delivers a seamless, engaging
soundstage that puts listeners inside the action.

®

Exclusive Tractrix
key component of this critically acclaimed series.
In the RC-52, this technology has been refined to
include improved throat geometry for a more
genuine, lifelike sound. Behind the horn lies a
1-inch titanium tweeter with a powerful
neodymium magnet motor structure to provide a
unique combination of precision, clarity and
effortless dynamics.

The RC-52 employs dual 5.25-inch woofers for a
solid bass foundation. These Cerametallic™
woofers with inverted copper dust caps exhibit a
very high stiffness-to-mass ratio and superb
damping characteristics.

Klipsch Tapered Array™ technology operates both
woofers at the lowest frequencies – maintaining
the high output capability necessary for good
center channel performance – but only one
operates all the way through the midrange to
where the tweeter takes over. This eliminates
acoustic interference between the woofer
outputs, a flaw in conventional speaker designs
that can severely impair sound quality at the sides
of the listening area.

Horns have always been the

• High-performance center channel

• Tapered Array

• Magnetically shielded drivers to prevent video interference

design for maximum dialogue clarity

™

SPECIFICATIONS

FREQUENCY RESPONSE 67Hz-23kHz ± 3dB

POWER HANDLING 125W RMS / 500W Peak

SENSITIVITY 96dB @ 2.83V / 1m

NOMINAL IMPEDANCE 8 ohms compatible
HIGH FREQUENCY DRIVERS 1" (2.54cm) Titanium diaphragm compression

driver mated to 90˚x 60˚ square
Tractrix®Horn

HIGH FREQUENCY CROSSOVER 1400Hz, 1600Hz
LOW FREQUENCY DRIVERS Dual 5.25" (13.3cm) Cerametallic

cone woofers

ENCLOSURE TYPE Bass-reflex via dual front-firing ports

HEIGHT 6.75" (17.2cm)

WIDTH 20.5" (52.1cm)

DEPTH

MOUNTIN

WEIGHT

FINISH

G

10.5" (26.7cm)

tilt and Downtilt feet

p

U

g)

22 lbs (1

Blac

0k

k Ash w

oodg

rain vinyl

™

The RC-52’s rigid cabinet offers improved internal
cross-bracing to minimize panel vibrations that can
color sound. Twin front-firing ports eliminate
turbulence noise, while increased baffle ribbing
around the horn mouth dramatically improves
acoustics across the sonic range. For signal purity
and perfect driver integration, the crossover on
the RC-52 features the finest components and
Klipsch custom internal wiring.

vailable in a black woodgrain vinyl finish, the

A
fully video-shielded RC-52 comes with a low­diffraction, magnetically attached grille to further
accentuate the elegance of this speaker

.

www.klipsch.com

1-800-KLIPSCH

All specifications are subject to change without notice. ©2006