Klipsch RB-75 Brochure

8'' Two-Way Bookshelf Loudspeaker

RB-75

■

The RB-75 is a high-performance, full-range
bookshelf loudspeaker suitable for use in
almost any audio or A/V system. Offering
very high efficiency and power handling
capability together with extended low­frequency response, a pair of RB
deliver room-filling sound on their own in a
traditional two
or anchor an impressive surround-sound
setup. RB-75s can also be used as surround­back speakers in 6.1- and 7.1-channel systems,
or main surrounds for those who prefer
direct-radiating speakers in that role. Matched
cosmetically and sonically to other Klipsch
Reference Series loudspeakers, RB-75s blend
perfectly into whatever system configuration
best suits your needs. A typical example would
be a home-theater system with RB-75s at the
front left and right, an RC-7 center speaker,
RS-7s for the surrounds, and an RSW-15
subwoofer.

The RB-75’s tweeter is a 1.75-inch titanium
dome compression driver loaded by an 8­inch square 90° x 60° Tractrix
into the front of the enclosure. The horn raises
the driver’s efficiency and controls its radiation
pattern to minimize detail-blurring reflections
from walls, floor
Cerametallic™cone woofer with a rigid, low­resonance cast-polymer frame delivers rich,
clean, pulse-pounding bass. All drivers are
magnetically shielded to prevent interference
with direct-view television sets. Premium
crossover components ensure optimum signal
transfer. The RB-75 is front-ported for
maximum installation flexibility. Amplifier
connections are via two pairs of binding posts,
which are strapped together for normal
wiring. Removing the straps allows the speaker
to be bi-wired. Magnetic posts hold the RB
75’s low-diffraction grille securely in place.
The cabinet is available in furniture grade
Medium Cherry
wood veneer.

-speaker stereo music system

, and ceiling. An 8-inch

, Blonde Maple or Black Ash

-75s can

®

Horn molded

-

Very high sensitivity and power handling

■

Tractrix Horn titanium dome compression driver tweeter for clean,
detailed highs

■

Cerametallic cone woofer with low-resonance cast-polymer frame

■

Front-ported for maximum installation flexibility

■

Magnetically shielded to prevent video interference

■

Real wood veneer finish

SPECIFICATIONS

BANDWIDTH 42Hz-20kHz ± 3dB

SENSITIVITY 97dB @ 2.83 volts/1 meter

NOMINAL IMPEDANCE 8 ohms compatible

CROSSOVER FREQUENCY 2000Hz

POWER HANDLING 150 watts (600 watts peak)

ENCLOSURE TYPE Bass-reflex via front-firing port
DRIVE COMPONENTS Two way system using one 1.75'' (4.5cm)

WEIGHT 32 lbs. (14.5kg)

HEIGHT 20.2" (51.3cm)

WIDTH 10" (25.4cm)

DEPTH 11.8" (30cm)
FINISH Black Ash, Medium Cherry or Blonde Maple

magnetically shielded, titanium diaphragm
compression driver with an integral 8''
(20.3cm) square 90˚x 60˚ Tractrix Horn

y shielded,

and one 8'' (20.3cm) magne
Cerametallic cone woofer

wood veneer

ticall

www.klipsch.com

1-800-KLIPSCH

All specifications are subject to change without notice. ©2004