8'' Two-Way Bookshelf Loudspeaker
RB-35
The RB-35 is a high-performance, full-range
bookshelf loudspeaker suitable for use in
almost any audio or A/V system. Offering
very high efficiency and power handling
capability together with extended lowfrequency response, a pair of RB-35s can
deliver room-filling sound on their own in a
traditional two-speaker stereo music system
or anchor an impressive surround-sound
setup. RB-35s can also be used as surroundback speakers in 6.1- and 7.1-channel systems,
or main surrounds for those who prefer
direct-radiating speakers in that role. Matched
cosmetically and sonically to other Klipsch
Reference Series loudspeakers, RB-35s blend
perfectly into whatever system configuration
best suits your needs. A typical example would
be a home theater system with RB-35s at the
front left and right, an RC-35 center speaker,
RS-35s for the main surrounds and an RW-12
subwoofer.
The RB-35’s tweeter is a 1-inch titanium dome
compression driver loaded by a 6-inch square
x 60° Tractrix®Horn molded into the front
°
90
of the enclosure. The horn raises the driver’s
efficiency and controls its radiation pattern to
minimize detail-blurring reflections from
walls, floor, and ceiling. An 8-inch
Cerametallic™cone woofer with a rigid, lowresonance cast-polymer frame delivers rich,
clean, pulse-pounding bass. All drivers are
magnetically shielded to prevent interference
with direct-view television sets. Premium
crossover components ensure optimum signal
transfer. The RB-35 is front-ported for
maximum installation flexibility
panel has a keyhole for surface wall-mounting.
Amplifier connections are via two pairs of
binding posts, which are strapped together for
normal wiring. Removing the straps allows the
speaker to be bi-wired. Magnetic posts hold
the RB-35’s low-diffraction grille securely in
place. The cabinet is available in a Black Ash or
Light Cherry woodgrain vinyl finish.
, and its back
■
Very high sensitivity and power handling
■
Tractrix Horn titanium dome compression driver tweeter for clean,
detailed highs
■
Cerametallic cone woofer with low-resonance cast-polymer frame
■
Front-ported for maximum installation flexibility
■
Magnetically shielded to prevent video interference
SPECIFICATIONS
BANDWIDTH 45Hz-20kHz ± 3dB
SENSITIVITY 96dB @ 2.83 volts/1 meter
NOMINAL IMPEDANCE 8 ohms compatible
CROSSOVER FREQUENCY 2350Hz
POWER HANDLING 125 watts (500 watts peak)
ENCLOSURE TYPE Bass-reflex via front-firing port
DRIVE COMPONENTS Two way system using one 1'' (2.5cm)
magnetically shielded, titanium dome
compression driver with an integral 6''
(15.2cm) square 90˚x 60˚ Tractrix horn and
one 8'' (20.3cm) magnetically shielded,
Cerametallic cone woofer
WEIGHT 24 lbs. (10.9kg)
HEIGHT 19" (48.3cm)
WIDTH 9.3" (23.6cm)
DEPTH 10.8" (27.4cm)
FINISH Black Ash or Light Cherry woodgrain vinyl
MOUNTING Keyhole mount
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004
8'' Two-Way Bookshelf Loudspeaker
RB-35
The RB-35 is a high-performance, full-range
bookshelf loudspeaker suitable for use in
almost any audio or A/V system. Offering
very high efficiency and power handling
capability together with extended lowfrequency response, a pair of RB-35s can
deliver room-filling sound on their own in a
traditional two-speaker stereo music system
or anchor an impressive surround-sound
setup. RB-35s can also be used as surroundback speakers in 6.1- and 7.1-channel systems,
or main surrounds for those who prefer
direct-radiating speakers in that role. Matched
cosmetically and sonically to other Klipsch
Reference Series loudspeakers, RB-35s blend
perfectly into whatever system configuration
best suits your needs. A typical example would
be a home theater system with RB-35s at the
front left and right, an RC-35 center speaker,
RS-35s for the main surrounds and an RW-12
subwoofer.
The RB-35’s tweeter is a 1-inch titanium dome
compression driver loaded by a 6-inch square
90° x 60° Tractrix
of the enclosure. The horn raises the driver’s
efficiency and controls its radiation pattern to
minimize detail-blurring reflections from
walls, floor, and ceiling. An 8-inch
Cerametallic™cone woofer with a rigid, lowresonance cast-polymer frame delivers rich,
clean, pulse-pounding bass. All drivers are
magnetically shielded to prevent interference
with direct-view television sets. Premium
crossover components ensure optimum signal
transfer. The RB-35 is front-ported for
maximum installation flexibility, and its back
panel has a keyhole for surface wall-mounting.
Amplifier connections are via two pairs of
binding posts, which are strapped together for
normal wiring. Removing the straps allows the
speaker to be bi-wired. Magnetic posts hold
the RB-35’s low-diffraction grille securely in
place. The cabinet is available in a Black Ash or
Light Cherry woodgrain vinyl finish.
®
Horn molded into the front
■
Very high sensitivity and power handling
■
Tractrix Horn titanium dome compression driver tweeter for clean,
detailed highs
■
Cerametallic cone woofer with low-resonance cast-polymer frame
■
Front-ported for maximum installation flexibility
■
Magnetically shielded to prevent video interference
SPECIFICATIONS
BANDWIDTH 45Hz-20kHz ± 3dB
SENSITIVITY 96dB @ 2.83 volts/1 meter
NOMINAL IMPEDANCE 8 ohms compatible
CROSSOVER FREQUENCY 2350Hz
POWER HANDLING 125 watts (500 watts peak)
ENCLOSURE TYPE Bass-reflex via front-firing port
DRIVE COMPONENTS Two way system using one 1'' (2.5cm)
magnetically shielded, titanium dome
compression driver with an integral 6''
(15.2cm) square 90˚x 60˚ Tractrix horn and
one 8'' (20.3cm) magnetically shielded,
Cerametallic cone woofer
WEIGHT 24 lbs. (10.9kg)
HEIGHT 19" (48.3cm)
WIDTH 9.3" (23.6cm)
DEPTH 10.8" (27.4cm)
FINISH Black Ash or Light Cherry woodgrain vinyl
MOUNTING Keyhole mount
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004