Klipsch R-2502-W User Manual
R-2502-W II
VERSATILE LCR SPEAKER UPDATED WITH A NEW LOW-PROFILE
DESIGN
The Klipsch R-2502-W II maintains the core technology use of a
high-quality 1” Silk Dome compression driver (tweeter) mated to a
conical horn, combined with dual 5.25” Polypropylene woofers in a 2-way
design. The R-2502-W II is perfect as a front right, left or center channel
speaker. Now with a new low profile, more elegant grille it continues as
the per fect choice for everything from 2-channel music playback to
surround sound system use.
NEW SLIMTRIM™ GRILLE
With an all new grille, the visible frame size is reduced by 90% and grille
depth is reduced by 80% over the previous design, for a more edge-toedge consistent look that blends in with the wall more attractively. The
new aluminum, paintable, magnetic grille attaches tightly and securely
with ease to virtually eliminate resonant distortion.
SYMMETRICAL CONICAL HORN
Klipsch horn-loaded technology increases acoustic output while
significantly reducing distortion. The horn’s 90° x 90° dispersion pattern
allows the speaker to maintain the same high-frequency directivity
whether the speaker is mounted ver tically or horizontally (as a center).
More direct sounds reach the main listening area with fewer reflections
for more detailed sound, wider dynamics and better vocal clarity.
SILK DOME COMPRESSION DRIVER (TWEETER)
Combined with the conical horn, the 1”, low-resonance Silk Dome
compression driver (tweeter) is designed to reproduce balanced
high-frequency information.
SPECIFICATIONS R-2502- W II
Frequency Response 47Hz-20KHz ± 3dB
Sensitivity
Nominal Impedance 8 ohms compatible
Crossover Frequency 2200Hz
Power Handling 60W RMS / 240W Peak
Recommended Amplifier
Power
High Frequency Driver 1" (2.54cm) Silk dome tweeter
Low Frequency Drivers Dual 5.25” (13.34cm) Polypropylene cone woofers
Enclosure Material/Type ABS/Infinite baffle, front flush with wall
Wire Gauage Accommodated 12 ga
Dimensions 17.75" H (45.09cm) x 8" W (20.32cm)
Cutout Dimensions 16.5" H (41.91cm) x 6.5" W (16.51cm)
Mounting Depth 3.5" (8.89cm)
Weight 6.25 lbs. (2.83kg)
Finish White paintable frame and grille
Installation Kit IK-502-W (sold separately)
Built From 2012
91dB @ 2.83V / 1m
110 W
FRONT IR KNOCKOUT
Allows installation of standard, .5” tube-type, IR repeater device.
SURE-GRIP MOUNTING DOGS
Provide even pressure against drywall for long-term installation reliability.
COMPATIBLE WITH THE KLIPSCH IK-502-W INSTALL KIT
For increased mounting flexibility and pre-install marking during new
construction.
3502 Woodview Trace Indianapolis, IN 46268 | klipsch.com
All specifications are subject to change without notice.
©2012 Klip sch Group, Inc. Kli psch is a registe red trademark .
A wholly-owned subsidiary of VOXX International Corporation
Loading...