Klipsch P-27S User Manual
$12 900
штука
Floorstanding Loudspeaker
A performer unlike any other, the flagship
Palladium™ Series P-39F floorstander is the
ultimate expression of Klipsch—approaching aural
perfection, while making a visual statement that is
every bit as elegant and passionate as the sound.
The speaker’s carbon-infused, thermoset composite dual-horn configuration is unique to the
Palladium family. It consists of a proprietary tweeter
design, combining a chambered phase plug and
Tractrix® Horn for extended high-frequency
response; a second 90º by 60º acoustically damped
Tractrix Horn is coupled to the midrange driver,
resulting in precise performances.
The three low-frequency drivers employ 9" hybrid
cone woofers, powered by a three-part neodymium magnet structure with dual stabilizing rings.
Triple ports further enhance low-distortion bass
response. Each woofer’s 1.5" voice coil responds
accurately to the smallest signal modulation, yet can
also handle the high power of the most demanding
soundtracks.
Many high-end speakers rely on off-the-shelf drivers; every P-39F driver has been engineered for
a specific application. Because these speakers are
sold as precisely matched left and right pairs, all of
the drive units and networks are hand sorted and
coordinated for ideal performance.
The P-39F’s dramatic styling was born from our
partnership with BMW Group DesignworksUSA.
With an eye toward home interior and furniture designs, this speaker has a signature look that blends
classic Klipsch audio with a clean, contemporary
appearance.
Its “boat-tail” enclosure hints at the power inside,
while maintaining a high degree of beauty. Next to
its unique shape, the most striking visual statement
is the zebra-grain Linia veneer that’s available in
natural, merlot or espresso. An adjustable brushed
aluminum floating base supports the cabinet at just
four points.
P-39F
• Flagship speaker offers high sensitivity and extremely low distortion
• Designed in conjunction with BMW Group DesignworksUSA
• Hand sorted drive units and networks for precise performance
• Matched left and right pair guarantees proper imaging
SpecificationS
frequency response 39Hz-24kHz +/-3dB
low frequency extension 28Hz
high frequency extension 30kHz
power handling 400W continuous / 1600W peak
recommended amplifier power 50 - 1000W
sensitivity 99dB @ 2.83V / 1m
nominal impedance 4 ohms
mid-frequency crossover 500Hz
high frequency crossover 3200Hz
maximum acoustic output 126dB (2 speakers in-room)
high frequency driver 0.75" (1.9cm) titanium diaphragm
compression driver mated to
90° x 60° Tractrix
mid-frequency driver 4.5" (11.4cm) aluminum diaphragm
compression driver mated to
90° x 60° Tractrix® Horn
low frequency drivers Three 9" (22.9cm) high-output,
aluminum / Rohacell
hybrid cone woofers
enclosure material Constrained layer MDF
(medium density fiberboard)
enclosure type Bass-reflex via triple side-firing ports
height 56" (142.2cm)
width 12" (30.5cm)
(14.5" / 36.8cm at the base)
depth 24.75" (62.9cm)
weight 165 lbs (74.9kg)
finishes Zebra-grain Linia veneer in natural,
merlot or espresso stain
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2008
®
Horn
®
/ Kevlar®
Floorstanding Loudspeaker
P-38F
• Elegantly balances performance and lifestyle
• Remarkably precise and detailed reproduction of sound
• Superior, low-distortion bass response
• Gallery-like appearance ts beautifully into any décor
SpecificationS
frequency response 40Hz-24kHz +/-3dB
low frequency extension 29Hz
As the intermediate floorstander in our
high-end luxury Palladium™ Series, the P-38F
features the flagship P-39F’s technology and
gallery-like appearance in a slightly smaller, but
equally stunning package.
The P-38F’s carbon-infused, thermoset
composite dual-horn configuration is unique
to the Palladium family. It consists of a proprietary tweeter design, combining a chambered
phase plug and Tractrix
high-frequency response; a second 90º by 60º
acoustically damped Tractrix Horn is coupled
to the midrange driver, resulting in precise
performances.
The three low-frequency drivers employ 8"
hybrid cone woofers, powered by a threepart neodymium magnet structure with dual
stabilizing rings. Four ports on the rear of the
speaker enhance low-distortion bass response.
Each woofer’s voice coil responds accurately
to the smallest signal modulation, yet can also
handle the high power of the most demanding
soundtracks.
®
Horn for extended
high frequency extension 30kHz
power handling 300W continuous / 1200W peak
recommended amplifier power 50 - 750W
sensitivity 98dB @ 2.83V / 1m
nominal impedance 4 ohms
mid-frequency crossover 550Hz
high frequency crossover 3400Hz
maximum acoustic output 122dB (2 speakers in-room)
high frequency driver 0.75" (1.9cm) titanium diaphragm
compression driver mated to
90° x 60° Tractrix
mid-frequency driver 4.5" (11.4cm) aluminum diaphragm
compression driver mated to
90° x 60° Tractrix® Horn
low frequency drivers Three 8" (20.3cm) high-output,
aluminum / Rohacell
hybrid cone woofers
enclosure material Constrained layer MDF
(medium density fiberboard)
®
Horn
®
/ Kevlar
®
Designed with an eye toward home interior
and furniture designs, the P-38F has a signature style that blends classic Klipsch audio
and a clean, contemporary look. Its unique
enclosure hints at the power inside, while
maintaining a high degree of beauty. Next to
its shape, the most striking visual statement is
the zebra-grain Linia veneer available in
natural, merlot or espresso. The horizontal
linear grain and absence of visible fasteners
further add to its appeal.
enclosure type Bass-reflex via quad rear-firing ports
height 50.25" (127.6cm)
width 10.75" (27.3cm)
(12.75" / 32.4cm at the base)
depth 21.5" (54.6cm)
weight 122 lbs (55.4kg)
finishes Zebra-grain Linia veneer in natural,
merlot or espresso stain
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2008
Floorstanding Loudspeaker
$10 000
пара
P-37F
• Elegantly balances performance and lifestyle
• Remarkably precise and detailed reproduction of sound
• Excellent, low-distortion bass response
• Gallery-like appearance ts beautifully into any décor
SpecificationS
frequency response 43Hz-24kHz +/-3dB
low frequency extension 31Hz
As the “smallest” floorstanding loudspeaker
in our high-end luxury Palladium™ Series, the
P-37F features the flagship P-39F’s technology
and gallery-like appearance in a slightly more
compact, but equally stunning package.
The P-37F’s carbon-infused, thermoset
composite dual-horn configuration is unique
to the Palladium family. It consists of a proprietary tweeter design, combining a chambered
phase plug and Tractrix
high-frequency response; a second 90º by 60º
acoustically damped Tractrix Horn is coupled
to the midrange driver, resulting in precise
performances.
The three low-frequency drivers employ 7"
hybrid cone woofers, powered by a unique
three-part neodymium magnet structure with
dual stabilizing rings. Three ports on the rear
of the speaker enhance low-distortion bass
response. Each woofer’s voice coil responds
accurately to the smallest signal modulation,
yet can also handle the high power of the most
demanding soundtracks.
®
Horn for extended
high frequency extension 30kHz
power handling 275W continuous / 1100W peak
recommended amplifier power 50 - 600W
sensitivity 96dB @ 2.83V / 1m
nominal impedance 4 ohms
mid-frequency crossover 550Hz
high frequency crossover 3400Hz
maximum acoustic output 120dB (2 speakers in-room)
high frequency driver 0.75" (1.9cm) titanium diaphragm
compression driver mated to
90° x 60° Tractrix
mid-frequency driver 4.5" (11.4cm) aluminum diaphragm
compression driver mated to
90° x 60° Tractrix® Horn
low frequency drivers Three 7" (17.8cm) high-output,
aluminum / Rohacell
hybrid cone woofers
enclosure material Constrained layer MDF
(medium density fiberboard)
®
Horn
®
/ Kevlar®
Designed with an eye toward home interior
and furniture designs, the P-37F has a signature style that blends classic Klipsch audio
and a clean, contemporary look. Its unique
enclosure hints at the power inside, while
maintaining a high degree of beauty. Next to
its shape, the most striking visual statement is
the zebra-grain Linia veneer available in natural, merlot or espresso. The horizontal linear
grain and absence of visible fasteners further
add to its appeal.
enclosure type Bass-reflex via triple rear-firing ports
height 46.5" (118.1cm)
width 9.75" (24.8cm)
(12" / 30.5cm at the base)
depth 19.5" (49.5cm)
weight 98 lbs (44.5kg)
finishes Zebra-grain Linia veneer in natural,
merlot or espresso stain
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2008
Loading...