Klipsch ME-650-W Brochure

Metal Enclosure for 6.5” In-Wall Speaker
ME-650-W
Designed to fit all Reference Series in-wall speakers with 6.5-inch woofers, the ME­650-W allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other.
The ME-650-W is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one­hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards.
[89]
3.5
[421]
16.6
[10]
.39
[332]
13
The ME-650-W fits 16- or 24-inch stud spans. It also comes with all of the hard­ware needed for any installation applica­tion and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.
The optimized enclosure volume provides consistent acoustic performance regard­less of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.
The inside edge of the ME-650-W’s mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.
[.8] .03
[457] 18
[279] 11
[387]
15
[425]
16.8
[330]
13
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2006
[451]
17.7
[203]
8
Loading...