Klipsch ICSW-8-T Brochure
Dual 8" In-Ceiling Passive Subwoofer
IC-SW-8T
■
Designed for high-quality, low-visual-impact
music reinforcement applications, Klipsch’s
innovative IC-SW-8T in-ceiling subwoofer
offers an unprecedented combination of
performance and versatility. Its four hightemperature voice coils allow transformerless
switch configuration for 70- or 100-volt, highimpedance distributed-audio systems, 4-ohm
single-input operation, or 8-ohm dual-input
operation. Eliminating the conventional
transformer coupling has significant benefits at
low frequencies, increasing power handling
and reducing distortion. The result is clean,
rich bass that adds warmth and body to any
installation. And the IC-SW-8T requires only
modest amplifier power to deliver satisfying
output levels.
High sensitivity and power handling
■
Extended, powerful bass
■
Very high output capability
■
Transformerless 70V/100V, single-input 4-ohm, or dual-input 8-ohm operation
■
ABS baffle with removable, paintable powder-coated aluminum grille
SPECIFICATIONS
BANDWIDTH
POWER HANDLING
MAX CONTINUOUS OUTPUT
SENSITIVITY
TRANSFORMER TAPS 70V: 60W, 30W
1
2
4
53-129Hz ± 4dB (-10dB 44Hz)
150W (27V)
3
111 d B
92dB @ 2.83 volts/1meter
100V: 120W, 60W
Through Position: 4 ohm Mono or
8 ohm Stereo
The IC-SW-8T is built around an 8-inch, longexcursion driver in a bandpass enclosure with
an 8-inch passive radiator. This arrangement
extends the subwoofer’s output while
minimizing distortion and preventing the
turbulence noise that can occur with ported
enclosures. Polypropylene cones, a formedsteel back can, and terminal-strip inputs assure
long, reliable service. The easy-to-install
subwoofer has an ABS plastic baffle and a
removable, powder
-coated aluminum grille
that can be painted to match the ceiling. It
ships with a tile bridge for installation in
suspended ceilings or where additional ceiling
reinforcement is necessary.
NOMINAL IMPEDANCE 6 ohms, 4.85 ohms minimum @ 145Hz
COMPONENTS One 8" woofer and One 8" polypropylene
drone
INPUT CONNECTOR 4-point Terminal Strip
ENCLOSURE MATERIAL Baffle: ABS Plastic Can: Formed Steel
DIAMETER 14.125" (35.88cm)
CUTOUT DIAMETER 12.5" (31.75cm)
MOUNTING DEPTH 11.25" (28.58cm)
HEIGHT 13.625" (34.61cm)
NET WEIGHT 23 lbs. (10.44kg)
SHIPPING WEIGHT 30 lbs. (13.62kg)
FINISH White
1
3M, half space anechoic
2
AES standard, continuous pink noise 50Hz-10Hz, 6dB peaks
3
Calculated at IM at power handling power input
4
Half space anechoic
All specifications are subject to change without notice. ©2004
.klipsch.com
www
1-800-KLIPSCH
Loading...