In-Ceiling Loudspeaker
The IC-525-T packs proven materials and wide dispersion horn technology into an installer-friendly, UL-2043 and 1480 certified loudspeaker with an integrated back can and multi-tap transformer. IC-T Series speakers have been included in a number of major installations nationally, from Bloomingdales in New York City to the Ron Jon Surf Shop in Orlando.
The two-way IC-525-T features a 5.25-inch woofer, and a titanium diaphragm compression driver on a 3.5-inch round modified XT Tractrix® Horn for smooth response with constant directivity. A Tractrix port design helps to provide deeper, fuller bass with less compression and distortion, while a new, more compact design simplifies low ceiling mounting.
For distributed line applications, the IC-525-T features a 70/100 volt multi-tap transformer. A single rotary switch for the 8-ohm bypass and multi-tap setting is conveniently located under the speaker grille. The IC-525-T is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required.
IC-525-T
•Wider, shorter design to fit low ceilings; multi-tap transformer
•70-volt, 100-volt, or 8-ohm operation selectable via front baffle switch
•Tractrix Port design for deep bass with less compression
•Wide dispersion Tractrix® Horn tweeter with XT technology for clear sound in any location
•Designed to mix and match with Klipsch CA-T speakers
S p e c i f i c a t i o n s
Frequency response |
65-20k Hz +/- 4 dB |
Power handling |
65 watts (16.5V) cont. |
|
|
Q |
4.5 |
Sensitivity |
89dB 2.83 V/1M |
Nominal impedance |
8 ohms, min 4.2 ohms when switch is |
|
set to 8 ohm position |
Transformer taps |
70V: 30W, 15W, 7.5W, 3.8W |
|
100V: 30W, 15W, 7.5W |
|
|
Maximum acoustic output |
104 dB @ 1M |
|
|
Coverage angle |
105 degrees |
|
|
Directivity index |
6.5 dB |
|
|
Transducers |
5.25” woofer and 1” titanium |
|
diaphragm compression driver on a |
|
3.5” round XT modified Tractrix Horn |
|
|
Enclosure tuning |
Vented via a Tractrix port |
|
|
Input connections |
Terminal Strip |
|
|
Thru hole width |
9” diameter |
|
|
Overall width |
10.75” diameter |
|
|
Overall depth |
8.313” |
|
|
Mounting depth |
8” |
|
|
Cutout dimensions |
9.125” diameter |
|
|
Weight |
8.25 lbs. |
|
|
Finishes |
Black and White |
www.klipsch.com 1-800-KLIPSCH All specifications are subject to change without notice. ©2008