KLING & FREITAG VIDA M Series, VIDA M 110, VIDA M 110 S, VIDA M 220, VIDA M 220 S User Manual
EN | | VERSION 1.1 | 08/19/2019
USER‘S MANUAL
K&F VIDAM
User‘s Manual K&F VIDAM
Table of Content
Chapter / Content Page
1 Introduction 5
1.1 Icons Used 5
1.2 About this user's manual 5
2 Product Description 6
2.1 Intended Use 6
2.2 Versions 6
2.3 System requirements 7
2.4 Items Included 7
2.4.1 Items Included VIDA M 110 / 110 S 7
2.4.2 Items Included VIDA M 220 / 220 S 7
2.5 Overview of VIDA M 110 / 110 S Parts 8
2.6 Overview of VIDA M 220 / 220 S Parts 9
2.7 Front-panel indicator 10
2.8 Accessories 11
2.9 Dimensions 12
2.9.1 Dimensions VIDA M 110 / 110 S 12
2.9.2 Dimensions VIDA M 220 / 220 S 13
2.10 Technical Specifications 14
2.10.1 Technical Specifications VIDA M 110 14
2.10.2 Technical Specifications VIDA M 110 S 15
2.10.3 Technical Specifications VIDA M 220 16
2.10.4 Technical Specifications VIDA M 220 S 17
2.11 Measuring Diagrams 18
3 General Safety Instructions 20
4 Initial installation of VIDA M 220 / 220 S modules 21
5 Wiring 24
5.1 Terminal positions and purpose 24
5.2 Kardioid 24
5.2.1 AC power inlet 24
5.2.2 Audio terminals 25
5.2.3 GPIO 26
6 GPIO specifications 27
6.1 GPI 27
6.1.1 GPI internal wiring: 28
6.2 GPO 29
7 Systemlatency 30
7.1 Dante latency 30
7.1.1 Example 30
7.1.2 Changing between Dante redundancy operating modes 31
©KLING & FREITAG GMBH Version 1.1 Page 3 of 40
User‘s Manual K&F VIDAM
7.1.3 Setting up Dante latency with an additional hop 31
8 Initial Operation 32
9 Updates 34
9.1 Firmware Update 34
9.2 Dante Update 35
10 Care and Maintenance 36
11 Transportation and Storage 37
12 Disposal 37
12.1 Germany 37
12.2 EU, Norway, Iceland, and Liechtenstein 37
12.3 All Other Countries 37
13 EC Declaration of Conformity 38
Page 4 of 4 Version 1.1 ©KLING & FREITAG GMBH
User's Manual K&F VIDAM
WARNUNG
VORSICHT
HINWEIS
TIPP
1
Introduction
1.1 Icons Used
This icon indicates a risk of injury or death. Not following these instructions may result in serious health problems including potentially fatal injuries.
This icon indicates a possibly dangerous situation. Not following these instructions may cause
minor injuries or damage.
This icon marks instructions for proper use of the described products. Not following these instructions may cause malfunctions or damage.
This icon marks information provided for simplified use of the described products.
1.2 About this user's manual
EN | Translation of the original instructions
All KLING&FREITAG manuals are originally authored in German.
© KLING&FREITAG GmbH, all rights reserved.
All specifications regarding the features of the described products and applicable safety guidelines provided in this manual are based on information available at the time of publishing.
We assume no responsibility for technical specifications, dimensions, weights, and properties.
All information in this manual is subject to change without notice.
To ensure safe operation, all persons using the speaker system must have access to
these user's manual and all other relevant material during installation. Ohne dieses
gelesen, verstanden und griffbereit vor Ort zu haben, darf das Lautsprechersystem
weder aufgebaut noch eingesetzt werden.
KLING&FREITAG spare manuals are separately available for order or can be downloaded
from our website: www.kling-freitag.de
Contact Us: info@kling-freitag.de
KLING & FREITAG GMBH, Junkersstr. 14, D-30179 Hannover
Phone +49 511 96 99 70, fax +49 511 67 37 94 (other countries)
© KLING & FREITAG GMBH Version 1.1 Page 5 of 40
User's Manual
WARNUNG
HINWEIS
VIDA M1.119.08.201908/19/2019
K&F VIDAM
2 Product Description
2.1 Intended Use
Be sure to use the VIDAM speaker system for stationary indoors installations only. The system
is not designed for repeated assembly, reconfiguration, disassembly, or transport.
Risks imposed by falling or overturning parts
Be sure to install, suspend, fasten, and use Kling &<###Space: 1##>Freitag speakers only using the designated fixtures as specified in this document.
Never down-tilt speakers mechanically.
Possible malfunctions
Never operate the speaker in an environment where the temperature exceeds 45 °C / 113 °F.
Never operate the speaker in places exceeding an altitude of 2,000 meters / 6,000 ft.
Make sure that the humidity is between 10% and 90%.
This product is not designed for use in corrosive environments.
Potential interference with household appliances
This device is not designed for home use.
Any use not described in this User’s Guide is not an intended use.
2.2 Versions
VIDAM is available in four versions designed for different applications and transmission ranges.
VIDA M 110
•
Asymmetrical design
•
Transmission range: approx. 20
meters
•
Height: 1.1 meters
VIDA M 110 S
•
Symmetrical design
•
Transmission range: approx. 25
meters
•
Height: 1.1 meters
VIDA M 220
•
Asymmetrical design
•
Transmission range: approx. 30
meters
•
Height: 2.2 meters
VIDA M 220 S
•
Symmetrical design
•
Transmission range: approx. 32
meters
•
Height: 2.2 meters
Page 6 of 40 Version 1.1 © KLING & FREITAG GMBH
User's Manual K&F VIDAM
2.3 System requirements
•
Mounting hardware
•
Computer running Windows 8, 8.1, or 10
•
VIDAApp
The VIDAApp required for setting up the speaker system is freely available at the Windows Store.
For this purpose, visit the Microsoft App Store and search for VIDA App.
For more information, refer to the VIDAApp User's Manual, which is available for download at our website.
www.kling-freitag.de
•
Audio source connected to Analog, AES 3, or Dante.
2.4 Items Included
2.4.1 Items Included VIDA M 110 / 110 S
•
VIDA M 110 / 110 S speaker (1 piece)
•
Counterbore caps (12 pieces)
•
Sealing plate for the connector panel (1 piece)
•
Countersunk screw M4x10 for fixing the sealing plate (7 pieces)
•
3-pin power connector (1 piece)
•
9-pin audio-in connector (1 piece)
•
15-pin GPIO connector (1 piece)
•
Cable tie (3 pieces)
•
Loctite 2400 (5 ml)
•
User’s manual (1 piece)
2.4.2 Items Included VIDA M 220 / 220 S
•
Passive module for VIDA M 220 or VIDA M 220 S (1 piece)
•
Active module for VIDA M 220 or VIDA M 220 S (1 piece)
•
Mounting plate for fastening the modules (2 pieces)
•
Countersunk screw M6x10 for fastening the modules (12 pieces)
•
Counterbore caps (12 pieces)
•
Sealing plate for the active-module connector panel (1 piece)
•
Sealing plate for the passive-module connector panel (1 piece)
•
Countersunk screw M4x10 for fastening the sealing plates (14 pieces)
•
3-pin power connector (1 piece)
•
9-pin audio-in connector (1 piece)
•
15-pin GPIO connector (1 piece)
•
Cable tie (3 pieces)
•
Loctite 2400 (5 ml)
•
User’s manual (1 piece)
© KLING & FREITAG GMBH Version 1.1 Page 7 of 40
User's Manual
VIDA M1.119.08.201908/19/2019
K&F VIDAM
2.5 Overview of VIDA M 110 / 110 S Parts
[A] Inlet for connecting mounting
hardware (also available at the
bottom)
[B] Bores for fastening mounting
hardware. Can be sealed using
the supplied caps when not in
use.
[C] Connector panel
[D] Sealing plate for connector panel
[E] Screws for fastening the sealing
plate:
7 x Countersunk screw M4x10,
hexagon socket wrench IS2,5 (7
pieces)
Page 8 of 40 Version 1.1 © KLING & FREITAG GMBH
User's Manual K&F VIDAM
2.6 Overview of VIDA M 220 / 220 S Parts
[A] Passive module
[B] Inlet for connecting mounting
hardware (bottom inlet for connecting the active module)
[C] Bores for fastening mounting
hardware. Can be sealed using
the supplied caps when not in
use. Use the bores at the bottom
for connection with the active
module [H].
[D] Connector panel for fastening
the active module
[E] Sealing plate for the passive-
module connector panel
[F] Screws for fastening the sealing
plate:
7 x Countersunk screw M4x10,
hexagon socket wrench IH2.5
[G] Fastener for connecting the pas-
sive module to the active module
[H] Active module
[I] Cable with connectors and
grommets for connecting the
passive module. The VIDA M 220
has only one single cable!
[J] Inlet for connecting to the pas-
sive module (inlet at the bottom
is for fastening mounting hardware)
[K] Bores for fastening the active
module [A]. The bores at the
bottom are for fastening mounting hardware. Can be sealed using the supplied caps when not
in use.
[L] Connector panel
[M] Sealing plate for the active-mod-
ule connector panel
[N] Screws for fastening the sealing
plate:
7 x Countersunk screw M4x10,
hexagon socket wrench IH2.5
© KLING & FREITAG GMBH Version 1.1 Page 9 of 40
User's Manual
VIDA M1.119.08.201908/19/2019
K&F VIDAM
2.7 Front-panel indicator
Each VIDAM features an LED indicator located behind the front grille. You can turn the LED
on and off using the VIDAApp in order to identify a specific VIDAM speaker.
The indicator color shows the following statuses:
•
Power-up (blue): The speaker is being powered up and will be ready for operation shortly.
•
Beam error (red-lit): The speaker has been powered up successfully and is ready for operation; however, the sound-ray setup needs to be checked.
•
Identification (green): The speaker is part of the selected speaker group.
•
Error (flashing red and green): Configuration error. Perform a firmware update. See chapter »Firmware Update«, page 34.
Page 10 of 40 Version 1.1 © KLING & FREITAG GMBH
User's Manual K&F VIDAM
2.8 Accessories
VIDAM wall bracket
VIDAM flying frame
VIDAM adapter,
suitable for VIDA M 110 / 110 S
© KLING & FREITAG GMBH Version 1.1 Page 11 of 40
User's Manual
VIDA M1.119.08.201908/19/2019
K&F VIDAM
2.9 Dimensions
2.9.1 Dimensions VIDA M 110 / 110 S
Page 12 of 40 Version 1.1 © KLING & FREITAG GMBH
Loading...