KLINGER SCHÖNEBERG INTEC K200-FS, INTEC K220-FS, INTEC K200-STD Series, INTEC K220 Series Assembly And Repair Instructions
Assembly and Repair Instructions
INTEC K200-FS
page 1 of 7
release 0
file:
Montage-ReparaturAnl INTEC K200-FSEN_100222.doc
Assembly and Repair Instructions for KLINGER SCHÖNEBERG Ball Valves, Type INTEC K200-FS
Table of Contents
1
Validity........................................................................................................................................................... 2
2 General Remarks........................................................................................................................................... 2
3 Construction and Components INTEC K200-FS............................................................................................ 3
4 Assembly of the INTEC K200-FS................................................................................................................... 4
4.1 Preparing for Assembly........................................................................................................................4
4.2 Assembling the Valve........................................................................................................................... 4
4.3 Assembling the Hand Lever................................................................................................................. 5
4.4 Function, Strength and Tightness Test................................................................................................. 5
4.5 Independent Conversion and Manufacture of Spare Parts................................................................... 5
4.6 Incorrect Operation............................................................................................................................... 5
5 Dismantling....................................................................................................................................................6
5.1 Precautionary Measures....................................................................................................................... 6
5.2 Preparing for Dismantling..................................................................................................................... 6
5.3 Dismantling........................................................................................................................................... 6
5.4 Final Cleaning and Recording of Damage............................................................................................ 7
Provide: Roth/BNi Approval: Roth
Date: 01.02.2010
Printed pages will not be updated
Assembly and Repair Instructions
INTEC K200-FS
page 2 of 7
release 0
file:
Montage-ReparaturAnl INTEC K200-FSEN_100222.doc
1 Validity
These Assembly and Repair Instructions are applicable to the type series listed below:
INTEC K200-FS
2 General Remarks
These Assembly and Repair Instructions are designed to provide assistance in ass embling, servicing and repairing the ball valve INTEC K200-FS.
The valves may only be dismantled and tak en apart by sk il led p erso nne l acqu ainte d wit h the ass em bly ,
commissioning and operation of this product.
Trained personnel within the meanin g of these Assembly a nd Repair Instructions ar e individuals who are able to
assess the work which they have been entrusted and to recognise possi ble risks in view of their s pecial training,
their know-how and experience and their knowledge of the pertinent standards.
These instructions as well as the Operating Instructions for KLINGER SCHÖNEBERG Ball Valves must be
observed. KLINGER SCHÖNEBERG GmbH shall no assume no liability for damage or interruptions to operation
arising from incorrect handling or failure to observe these Repair Instructions.
Provide: Roth/BNi Approval: Roth
Printed pages will not be updated
Date: 01.02.2010
Assembly and Repair Instructions
INTEC K200-FS
3 Construction and Components INTEC K200-FS
page 3 of 7
release 0
file:
Montage-ReparaturAnl INTEC K200-FSEN_100222.doc
13
12
11
10
9
8
INTEC K200-FS
15
2
14
4
3
4
1
Pos.1part
body
2cap
3 ball
4seat ring
5stem
below seal ring
6
7 below cone ring
upper seal ring
8
Provide: Roth/BNi Approval: Roth
9
10
11
12
13
14
15
7
6
5
partPos.
upper cone ring
Fire-Safe seal ring
Fire-Safe gland ring
Fire-Safe friction washer
selflocking nut
body seal
hex. screw
Date: 01.02.2010
Printed pages will not be updated
Loading...