KLINGER SCHÖNEBERG INTEC K211-HT Series Assembly And Repair Instructions
Assembly and Repair Instructions
INTEC K211-HT
page 1 of 7
release 0
file:
Montage-ReparaturAnl INTEC K211-HTEN_101029.doc
Assembly and Repair Instructions for KLINGER SCHÖNEBERG Ball Valves, Type INTEC K211-HT
Table of Contents
1
Validity........................................................................................................................................................... 2
2 General Remarks........................................................................................................................................... 2
3 Construction and Components INTEC K211-HT ........................................................................................... 3
4 Assembly of the INTEC K211-HT.................................................................................................................. 4
4.1 Preparing for Assembly........................................................................................................................4
4.2 Assembling the Valve........................................................................................................................... 4
4.3 Assembling the Hand Lever................................................................................................................. 5
4.4 Function, Strength and Tightness Test................................................................................................. 5
4.5 Independent Conversion and Manufacture of Spare Parts................................................................... 5
4.6 Incorrect Operation............................................................................................................................... 6
5 Dismantling....................................................................................................................................................6
5.1 Precautionary Measures....................................................................................................................... 6
5.2 Preparing for Dismantling..................................................................................................................... 6
5.3 Dismantling........................................................................................................................................... 6
5.4 Final Cleaning and Recording of Damage............................................................................................ 7
Provide: Roth/BNi Approval: Roth
Date: 01.10.2010
Printed pages will not be updated
Assembly and Repair Instructions
INTEC K211-HT
page 2 of 7
release 0
file:
Montage-ReparaturAnl INTEC K211-HTEN_101029.doc
1 Validity
These Assembly and Repair Instructions are applicable to the type series listed below:
INTEC K211-HT
2 General Remarks
These Assembly and Repair Instructions are designed to provide assistance in ass embling, servicing and repairing the ball valve INTEC K211-HT.
The valves may only be dismantled and tak en apart by sk il led p erso nne l acqu ainte d wit h the ass em bly ,
commissioning and operation of this product.
Trained personnel within the meanin g of these Assembly a nd Repair Instructions ar e individuals who are able to
assess the work which they have been entrusted and to recognise possi ble risks in view of their s pecial training,
their know-how and experience and their knowledge of the pertinent standards.
These instructions as well as the Operating Instructions for KLINGER SCHÖNEBERG Ball Valves must be
observed. KLINGER SCHÖNEBERG GmbH shall no assume no liability for damage or interruptions to operation
arising from incorrect handling or failure to observe these Repair Instructions.
Provide: Roth/BNi Approval: Roth
Printed pages will not be updated
Date: 01.10.2010
Assembly and Repair Instructions
INTEC K211-HT
3 Construction and Components INTEC K211-HT
Pos. Part Pos. Part
1 body 11 thrust washer
2 cap 12 solid sealing
3 ball hard facing metal coated 13 upper stem bearing
4 seat hard facing metal coated 14 nut
5 seat seal 15 trunnion
6 thrust collar 16 trunnion sea l
7 spiral spring 17 trunnion bearing
8 mounted stem 18 body seal
9 below stem bearing 19 hex. screw
10 cone ring
page 3 of 7
release 0
file:
Montage-ReparaturAnl INTEC K211-HTEN_101029.doc
Provide: Roth/BNi Approval: Roth
Date: 01.10.2010
Printed pages will not be updated
Loading...