K-Line Delta V-Rake Series, Delta V-Rake DR10, Delta V-Rake DR16, Delta V-Rake DR18, Delta V-Rake DR12 Instruction Manual

INSTRUCTION MANUAL

DELTA V-RAKE

Includes Rear Steer option

Serial No.

THIS PAGE IS INTENTIONALLY

LEFT BLANK

WARNING!!!

SAFETY PRECAUTIONS

FAILURE TO OBSERVE THE FOLLOWING INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH

It is the responsibility of the user to:
Maintain in as new condition all warning and safety signs and devices at all
times.

Consult electricity authorities and all relevant energy companies to determine
safe working distances from overhead power lines etc. BEFORE operation of
the machine.

POWER LINES CAN ARC AND ELECTROCUTE WITHOUT
COMING IN CONTACT!!!

 Ensure all operators are familiar with this manual and all safety devices

and features of the machine.

 Take every reasonable precaution as is commonly expected in this

industry and in the operation of the machine.

 Maintain the machine at all times in a condition that is safe to operate,

and ensure it complies with any relevant safety acts of parliament,
government authorities and regulations.

 Before mounting, check with manufacturer of machine or consult

engineer to ensure strength and balance of machine is adequate to
accommodate the K-Line products you have purchased.

Dear Customer

Thank you for purchasing a Delta V-Rake made by K-LINE AGRICULTURE. We
would like to assure you that you have made a good choice, and will be able to rely
on this high quality piece of equipment. You are welcome to phone us on 1800 194

131 to discuss any feature of this mower. We ask you to follow the Instruction
Manual closely, as this will ensure that you experience the benefits of using the

machine without unnecessary down time caused by misuse.
The return of the Warranty Registration Form will enable a prompt and efficient

identification of your Delta V-Rake and attention to any concern you may have.

IDENTIFYING THE MACHINE FOR REQUESTING SPARE
PARTS

The machine is identified by the serial number on the metal plate on the machine.
When requesting spare parts or maintenance service, please indicate the model and
number of your equipment to ensure prompt and efficient attention.

AVAILABILITY OF GENUINE PARTS

K-LINE spare parts and accessorised have been specifically designed and
developed for the machines produced. We would call your attention to the fact that
non-genuine parts and accessories are not recommended by K-LINE. The use of
such replacement parts frees K-LINE from all liability and makes the warranty void.
The installation and/or use of non-genuine parts may, because of technical
characteristics of construction, may modify or influence the performance of the
machine negatively.

AFTER DELIVERY

When you receive the machine, make sure that no damage has been done to it
during transportation and that no parts are missing. Only by giving us immediate
advice can the necessary replacement parts be obtained. It should be ensured that
all components are correctly adjusted.

KILOWATT RANGE

RAKE SIZE (reels)

35-45

10-14

45-60

14-18

60-80

18-20

SPECIFICATIONS – DELTA V-RAKE

CODE

DESCRIPTION

REEL LIFT

OPERATING
WIDTH (M)

TRANSPORT
WIDTH (M)

TRANSPORT
LENGTH (M)

TRANSPORT
LENGTH (M)

REAR STEER
OPTION

RAKING
SPEED

DR10

10 REEL

HYDRAULIC

6.5

2.5

6.45

7.45

8-18KM/H

DR12

12 REEL

HYDRAULIC

7.4

2.5

7.2

8.2

8-18KM/H

DR14

14 REEL

HYDRAULIC

8.2

2.5

8.05

9.05

8-18KM/H

DR16

16 REEL

HYDRAULIC

9.2

2.5

8.8

9.8

8-18KM/H

DR18

18 REEL

HYDRAULIC

10.1

2.5

9.65

10.65

8-18KM/H

DR20

20 REEL

HYDRAULIC

11

2.5

10.6

11.6

8-18KM/H

Hydraulic operating pressure

Approx. 2500 PSI

Standard reel lift only – single spool

Optional hydraulic open fold – twin spool

Plus optional windrow width adjustment – 3

spools

Tractor Requirements

Due to continual product development, design and specifications are subject to change without notice

INSTRUCTIONS FOR SAFE
OPERATION

The machine should not be driven, maintained or repaired by people who are not aware of
the contents of this Risk Document.

This User’s Manual should be read and understood by all those who use, adjust or control

the machine. These safety instructions should be passed onto other users.

1. BE SURE tractor drawbar pin is locked securely in place.

2. Make SURE all personnel are clear of machine when folding/unfolding &
when in operation.

3. DO NOT activate unit while personnel are within 50 metres.

4. KEEP CLEAR of machine when in working & lifted position – AT ALL TIMES.

5. Hydraulic lines & hoses operate under extremely high pressure & if damaged
or worn MUST be repaired IMMEDIATELY.

6. Keep HANDS & BODY CLEAR of any oil leakage as high pressure oil can
penetrate the skin.

7. All bolts, nuts & pins MUST be well secured.

8. DO NOT stand on or ride on machine.

9. NEVER get under or on top of machine when it is supported by jack and
KEEP FEET & BODY CLEAR when operating jack.

10. NEVER alter the depth control or change to or from transport position, while
another person adjusts safety pins.

11. This machine has not been designed or built for road use. Please consult
State Police, Roads & Traffic Authority and any other relevant authorities
regarding the roads concerned when in transit.

12. DO NOT operate if any part of this machine is within 10 metres of overhead
power lines.

13. SPEED LIMIT – Subject to permit regulations, local Government Authorities,
road surface conditions & prime mover towing recommendations. Maximum
towing speed is 40km/hr. DO NOT EXCEED AT ANY TIME.

14. TYRE PRESSURE – Consult recommended tyre pressure table in this
manual.

15. Before operation, all hydraulic cylinders must be primed.

IMPORTANT

K-LINE AGRICULTURE spare parts and accessories have been specifically designed and

developed for the machines produced. We call your attention to the fact that non genuine
parts and accessories are not recommended by K-LINE AGRICULTURE. The use of such
replacement parts frees K-LINE AGRICULTURE from all liability and makes the warranty
void. The installation and/or use of non-genuine parts may, because of the technical
characteristics of construction, modify or influence the performance of the machine
negatively.

REMEMBER AN IMPLEMENT WITH NO BRAKES
REQUIRES CAUTION & COMPETENCE

Reel lift
locking pin
mode

Transport
locking
pin out
Figure 2

Figure 1

Transport
pin in

Figure 3

Transport arm
& safety chain
released

Ensure all bolts and pins are securely fastened before operating.

SAFE WORK PROCEDURES

TO SET RAKE IN WORKING POSITION

1. Park tractor (or prime mover) on a safe level site. Engage park brake and stop
engine.

2. Disconnect short transport arm and pin into raised position (Figure 3)

3. Remove safety chains from front of wing. (Figure 3)

4. Release and lift down long working arm – adjust to desired working width and
engage on raking arm, observing correct manual handling techniques.

5. Repeat steps 2 - 4 for other side of rake.

6. Adjust pins and lower splitter reels to the working position (if manual splitters
fitted).

7. Lift reel arms with hydraulics and remove transport pin (figure 2)

8. Slowly lower hay reels to working position.

9. Machine is ready to use.

transport
in storage

Figure 4

Transport arm &
safety chain secured

TO SET RAKE IN TRANSPORT POSITION

1. Park tractor on safe level site, engage park brake and stop engine.

2. Lift splitter reels and adjust pins to transport position (if manual splitters are
fitted).

Observe correct manual handling techniques.

3. Raise hay reels to transport position using the hydraulics and insert transport
pin.

4. Disconnect long working arm and lift into transport holder, then fasten
securely.

5. Lower short transport arm and secure into transport position and attach safety
chain. (figure 4)

6. Repeat steps 4 & 5 for other side of rake.

THE OPERATOR MUST ENSURE NO PERSONNEL ARE NEAR REELS
WHEN LOWERING, RAISING OR OPERATING MACHINE.

Eye protection (safety glasses or goggles) and foot protection (safety boots) must
be worn when adjusting depth control and changing or repositioning rake reels.

WARNING – Disengage rear steer for transport (if applicable)