Klimawent ERGO-FLEX LUX, ERGO-FLEX LUX-3, ERGO-FLEX LUX-4, ERGO-FLEX LUX-2-R, ERGO-FLEX LUX-2 Use And Maintenance Manual
...
1
10.01.2019 Extraction Arm ERGO-FLEX LUX
Use and Maintenance Manual
Extraction Arms
ERGO-FLEX LUX
2
Extraction Arm ERGO-FLEX LUX 10.01.2019
Contents:
1. Introductory Remarks ......................................................................... 3
2. Application ......................................................................................... 3
3. Reservations of Producer .................................................................... 3
4. Technical Data .................................................................................... 4
5. Structure and Function....................................................................... 7
6. Assembly and Start-up ........................................................................ 7
7. Operational Use .................................................................................. 8
8. Troubleshooting Guide ........................................................................ 9
9. Maintenance ....................................................................................... 9
10. Occupational Health and Safety .......................................................... 9
11. Transport and Storage ........................................................................ 10
12. Terms of warranty .............................................................................. 10
13. Sample of the Declaration of Conformity ............................................ 13
3
10.01.2019 Extraction Arm ERGO-FLEX LUX
1. Introductory Remarks
The purpose of the present Use and Maintenance Manual is to supply User with directions within the range of application, installation, start-up and the use of the ERGO-FLEX LUX Extrac-
tion Arms.
Installing, start up and operational use are exclusively admissible after getting acquaintted with the contents of the Use and Maintenance Manual.
With regard to continuity of work carried on improvement of our products, we reserve for ourselves the revision possibility of the draft and technological changes improving
their functional features and safety.
The construction of the ERGO-FLEX LUX Extraction Arms meets the requirements of the cur-
rent state of technology as well as the safety and health assurances included in:
2006/42/EC Machinery Directive of the European Parliament and of the Council of 17 May,
2006 on machinery – amending the 95/16/EC (recast) /Journal of Laws EC L157 of 09.06.2006, page 24/
The appliance meets following harmonized standard:
PN-EN ISO 12100:2012
–
“Safety of machinery. Basic concepts, general principles for
design. Risk assessment and risk reduction”.
2. Application
ERGO-FLEX LUX Extraction Arms have been developed for capturing the welding dust parti-
cles and welding gas as well as other fine dust particles, directly at the emission source, in order
to avoid the contamination expanding within the process room/hall and protect the people in the
vicinity from inhaling the contamination.
The extraction arms are manufactured in hanging and standing version. They can work independently, in a single configuration with one extraction fan, or in a group of extraction arms, connected to the main collecting ducting (with a central fan).
3. Reservations of Producer
A.
Manufacturer is not liable for any consequences following from the operational use that is
in contradiction to the purpose of application.
B.
Do not install any additional elements not belonging to the normal device structure or accessory set.
C.
Any structural changes or modifications on the appliance on one’s own are not permitted.
D.
Protect the flexible elements of the arm from mechanical damage.
E.
Before the installing, check the load carrying capacity of the wall / building structure in pla-
ces where the appliance shall be installed. Unsure mounting could cause damage of the de-
vice, risk to personnel / people in the vicinity.
F.
The appliance must not be used for conveying the air containing aggressive contami-
nation.
4
Extraction Arm ERGO-FLEX LUX 10.01.2019
4. Technical Data
Table No.1
Type
D L A B C
E
n x F
G
Weight
[mm]
[m]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[kg]
ERGO-FLEX LUX-2
Ø160
2
930
435
355
Ø194
6 x Ø6,5
Ø295
8,5
ERGO-FLEX LUX-3
3
1510
846
9,6
ERGO-FLEX LUX-4
4
1890
1435
10,2
ERGO-FLEX LUX-2-R
2
1230
435
8,4
ERGO-FLEX LUX-3-R
3
1810
846
9,1
ERGO-FLEX LUX-4-R
4
2190
1435
9,8
Fig. No.1 – Dimensions of the extraction arms type ERGO-FLEX LUX
5
10.01.2019 Extraction Arm ERGO-FLEX LUX
Table No.2 – Hood
Type
G Z T H Application
Weight
[mm]
[mm]
[mm]
[mm]
[kg]
LST
Ø295
Ø365
Ø170
190
ERGO-FLEX LUX-2
ERGO-FLEX LUX-3
ERGO-FLEX LUX-4
ERGO-FLEX LUX-2-R
ERGO-FLEX LUX-3-R
ERGO-FLEX LUX-4-R
0,42
Flow chart ERGO-FLEX LUX-2
Loading...