Klimaire KJR12B Installation Manual

INSTALLATION MANUAL

AIR CONDITIONER WIRED CONTROL

MODEL: KJR-12B/DP(T)-F-1

Thank you very much for purchasing our product.

Before using your unit, please read this manual carefully and keep it for future reference.

KJR-12B/DP(T)-E-1A
KJR-12B/DP(T)-E-2
RCW8(P/N:7ACEL1706)

● This manual gives detailed description of the precautions

that should be brought to your attention during operation.

● In order to ensure correct service of the wired controller

please read this manual carefully before using the unit.

● For convenience of future reference, keep this manual

after reading it.

CONTENTS

1. SAFETY PRECAUTIONS......................................................................... 1

2. INSTALLATION ACCESSORY.................................................................. 2

3. INSTALLATION METHOD.........................................................................4

1. SAFETY PRECAUTIONS



Read the safety precautions carefully before installing the unit.



Stated below are important safety issues that must be obeyed.

WARNING

CAUTION

Means improper handling may lead to personal death or severe injury.

Means improper handling may lead to personal injury or property loss.

WARNING

Please entrust the distributor or professionals to install the unit.
Installation by other persons may lead to imperfect installation, electric shock or fire.
Adhere to this installation manual.
Imporper installation may lead to electric shock or fire.
Reinstallation must be performed by professionals.
improper installation may lead to electric shock or fire.

Do not uninstall the unit randomly.
Random uninstalling may lead to abnormal operation, heating or fire of the air condition.

NOTE

1

Do not install the unit in a place vulnerable to leakage of flammable gases.Once
flammable gases are leaked and left around the wire controller, fire may occure.
Do not operate with wet hands or let water enter the wire controller. Otherwise,

2

electric shock may occur.

3

The wiring should adapt to the wire controller current. Otherwise, electric leakage or
heating may occur and result in fire.
The specified cables shall be applied in the wiring. No external force may be applied

4

to the terminal. Otherwise, wire cut and heating may occur and result in fire.

1