iPod is a trademark of Apple Inc., registered in the US and other countries
WARNING
• TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
• THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER
AND THAT NO OBJECT FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED
ON APPARATUS.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
2
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15) Grounding or Polarization – This product may be equipped with a polarized alternating-
current line plug (a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
16) Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating, and these openings must
not be blocked or covered. The openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
17) The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
18) The use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
19) The Caution Mark is located on the bottom of the product.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to promote reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of more of
the following measures:
• Reorient or relocate the equipment and/or the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications to this equipment not expressly approved by KLH for compliance will
void the user’s warranty.
3
TABLE OF CONTENTS:
Page
Antenna – AM 6
Antenna – FM 6
Aux input 16
Battery for remote 5
Clock 10
Clock – viewing while listening to radio 11
Control locations 7
CR2032 battery 5
Dock for iPod 12
Electrical power 6
FCC 3
Feature descriptions 8
Feature identification 7
Headphones, using with 16
IPod, using with 12
Packing list 5
Placement of KS-600 6
Playback order – CD 15
Preparing for use 5
Presets – favorite radio stations 11
Programmed playback order – CD 15
Programming on/off times 11
Radio 10
Remote control 5
Repeat – CD 15
Repeat – iPod 14
Setting the clock 10
Setting the turn on and off times 11
Shuffle mode – CD 14
Shuffle mode – iPod 13
Sleep function 17
Speakers 5
Storing favorite stations 11
Time display w/ Radio playing 11
Timer 11
Troubleshooting 17
Tuner 10
Unpack 5
User notes 19
Video output from iPod using w/ TV 13
Warranty 20
4
Thank you for purchasing the musicdock by KLH model KS-600 AM/FM
executive shelf system with CD player, dock for iPod, and remote control. With
proper care this system should provide many years of reliable operation.
UNPACK and verify that all accessories are present. Here is what is included:
1. The main unit
2. Two speakers
3. iPod dock w/ adjustable support
4. AM Loop antenna
5. Base for AM loop antenna
6. FM wire antenna
7. 3.5 mm to 3.5 mm interconnect cable
8. Remote control
9. Battery for remote control (may be installed)
10. This instruction booklet
PREPARING THE KS-600 FOR USE
Unroll the wire from the right speaker. Grip the side of the
wire that is marked with a dashed line. Depress the R+
(red) thumb tab and insert the bare wire end into the oval
hole. Release the thumb tab to complete the connection.
Connect the unmarked side of the R speaker wire to the
black R terminal. Similarly, connect the left speaker to the
left speaker terminals. The speaker terminals are
identified as (30) on the control and feature identification
drawing.
If you will be using the KS-600 with an iPod, insert the
plug at the end of the dock cable into the socket (27) on
the right side of the KC-600. DO NOT twist the plug to
achieve alignment, as this WILL damage the plug. This
dock only needs to be connected if you will be using an
iPod with the KS-600.
Install the CR2032 “coin” cell BATTERY in the
remote control. To do accomplish, press down
and pull back to remove the battery compartment
cover. Insert the battery with the large smooth
surface marked with a + up as shown in the photo.
Replace the cover.
Replace this battery when the remote’s operating
range deteriorates.
5
ANTENNAS – AM AND FM
Unpack the AM antenna and snap it’s cylindrical end onto the base/mounting
plate. Stretch out the twisted cord and Insert the small rectangular plug at the
end into the socket (29) located on the side of the main unit. Note, this plug is
keyed and only fits one way. Orient the AM antenna for best reception of your
favorite AM station.
Locate the FM wire antenna and stretch it out. The
plastic connector on the end of this wire should be
pressed onto the center post of the FM antenna
connector (28) on the right side of the KS-600. Some
force may be necessary to accomplish this. Position
this antenna for best reception of your favorite FM
station.
SELECT A LOCATION for your KS-600
Because the KS-600 generates heat during operation it is necessary to provide
open space around it for proper cooling. Failure to do so can significantly reduce
the service life. Do not place the KS-600 near a heater or in direct sunlight. The
KS-600 should not be placed atop electronic devices that generate heat.
In most situations the best radio reception will be had when the KS-600 and its
antennas are near a window.
For proper remote control operation there must be an unobstructed path between
the remote and the KS-600 face.
The KS-600 includes an aux input allowing external devices with a headphone
output to be played through the KS-600. If this feature will be used, keep in
mind the length of the interconnect cable needed when selecting the location.
CONNECT POWER
Plug the Power cord into an un-switched electrical outlet. Press the
STANDBY/ON button to verify that the blue panel lights come on.
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.