Page 1
ENGLISH
Store your lanyard and safety glasses in cool locations, away
from direct sunlight or extreme heat.
60177
FIT:
1) Untwist the lanyard, if needed.
Dress the rubber loops around the safety glass
2)
ear stems, past the first bump.
3)
Pull the sleeve up to lock the loop on both stems.
Close the plastic snap. Tug on the snap to ensure
4)
the lanyard is secured.
CLEANING AND CARE:
Wipe the lanyard with a damp cloth as needed. Avoid getting
the lanyard wet. Do NOT wash using strong detergents, bleach,
ammonia, solvents or abrasive cleaners. Inspect the lanyard
daily. Replace immediately if signs of fraying, cracking,
discoloration, stretching, tearing or other unusual wear are seen.
Lanyard should be replaced immediately after experiencing
a severe snag, even if no visual signs of damage are noticed.
WARNING:
Break-away performance will vary and lanyard will NOT break
away under all conditions. End-user should test the breakaway feature for suitability for their application. Altering the
lanyard may compromise its function permanently, leading to
serious personal injury.
Breakaway Lanyard - Instructions
• See warnings and care and cleaning instructions inside.
1330807 Rev 01/20 A
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
Loading...