•
•
•
•
•
•
Specifications subject to change.
•
Always wear approved eye protection.
•
•
Wheels (
4)
Store both handheld unit and leader unit in provided case.
or
or www.epa.gov
for additional information.
ESPENGLISH
FIG. A
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
ENGLISH
The main function of the 50611 Magnetic Wire Puller is
for pulling wires and/or cables within wall cavities. The
Tie off wire(s) or cable(s) to be ran behind the wall to
the Eye-loop Tip, using a polyester pull string if needed.
to get the Leader Unit in between the insulation and
With the Leader Unit in the wall cavity, use the Handheld
the drywall. The Handheld Unit and Leader Unit will
With the two units magnetically connected, slowly pull
the Handheld Unit towards the wall cutout location,
while also using light force to push the Handheld Unit
When approaching the wall cutout, carefully pull the
the Leader Unit and wire(s)/cable(s) through the wall
ADDITIONAL USES
The 50611 Magnetic Wire Puller can also be used in
The 50611 Magnetic Wire Puller also works as a stud
finder, for both metal and wood studs. For this use,
wood stud. Then, align the Handheld unit vertically
V-notches in the Magnetic Base to mark the center of
Replacement Leader Unit
FIG. B
FIG. C
FIG. D
FIG. E
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Loading...