Klein Tools 603-10, 660, 601-6, 603-3, 601-3 Users Guide

Screwdrivers,
Nut Drivers and
Accessories

Offering a variety of tip types,
hex sizes, shaft lengths, and handle
designs, Klein has the screwdrivers
and nut drivers professionals
demand to get the job done with
comfort and ease.

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

49

www.kleintools.com

Introduction

Extra-quality features have made the Klein name famous for hand tools – features that
assure greater convenience, comfort and efficiency in use, plus exceptional strength
and durability.

All Klein drivers are made of the highest quality tempered steel and carefully
heat-treated for maximum strength. Shafts have integral flanges that provide an extra­strong, torque-proof anchor in the handle. Strong, durable black tips are forged and
precision ground with square edges to fit screw openings securely. They resist slip­page and provide positive turning action.

Cushion-Grip screwdrivers feature super-comfortable, sure-grip handles on top-quality
blades for the professional. All Klein screwdrivers meet or exceed applicable ANSI and
MIL specifications.

Using Screwdrivers and Nut Drivers

The size of the screw or nut and the type of opening it has determines which driver

to use. Here are a few tips on how to use a driver that can be of benefit, because
screwdrivers are the most often misused and abused hand tools of all.

4. Never use a driver at an angle to the screw.
Always keep the shank perpendicular to the screw head. Driving at an angle or

using a point that is too small can spoil the screw or slip and damage the work.

Keystone Cabinet Phillips

(Profilated Tip)

Combo
Recess

Square TORX

®

1. Never use a driver to do another tool's job.

Using a driver as a pry bar, scraper, or a chisel can ruin the tool, spoil the work

and cause injury.

2. Never push a driver beyond its capacity.

Make a pilot hole for the screw for easier driving. Use square-shank drivers
for heavy work.

3. Never expose a driver to excessive heat.

Direct flame can draw the temper from the metal, weakening and possibly

warping it, making it unsafe and inefficient to use.

Quickly magnetize and demagnetize screwdriver tips
and bits using powerful rare-earth magnets

To magnetize screwdriver:

Insert screwdriver shaft fully into
magnetizing slot; avoid rotating
shaft while drawing out slowly

To demagnetize screwdriver:

Insert shaft fully into smallest
demagnetizing slot that fits; avoid
rotating shaft while drawing out slowly

5. Never depend on a driver's handle or covered blade to insulate you
from electricity. Plastic and Cushion-Grip handles are intended only to provide a

firm, comfortable grip. Insulated blades are intended only as a protective measure
against shorting out components. Only use insulated tools that are marked with the
official international 1000-volt rating symbol if there is any chance that the tool will
make contact with an energized source.

6. Discard damaged or worn drivers.

TORX® is a registered trademark of Acument Intellectual Properties, LLC.

Fits these drivers

NEW!

• #3 Phillips

• 1/4" Keystone

(round or square shank)

• 5/16" Cabinet

• #2 Phillips Insulated

• 1/4" Cabinet Insulated

• Most precision screwdrivers

Cat. No. Overall Length Overall Height Overall Width Weight

MAG2 2-13/64" (56.0 mm) 45/64" (17.9 mm) 1-3/32" (26.2 mm) 1.1 oz (32 g)

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

www.kleintools.com

Cushion-Grip Screwdrivers

Meets or exceeds applicable ASME / ANSI specifications

Heat-treated, premium chrome­plated shank for smooth feel

and corrosion resistance

Precision-machined

tip for exact fit

Tip-Ident® quickly identifies the

type of screwdriver and

tip orientation

Integral flanges inside handle provide

solid, twist-resistant blade anchor

Color-Coded Cushion-Grip Screwdrivers

Includes core Cushion-Grip screwdriver features plus:

Color-coded handle ends for quick and easy identification

•

TORX® tip drive cuts slippage, saves fasteners and transmits more

•

torque to the work

Cat.

Tip

No.

Type

660 #0 Square-Recess Round 4" (101.6 mm) Yellow 7-3/4" (196.9 mm) 0.20 lb (0.09 kg)
661 #1 Square-Recess Round 4" (101.6 mm) Green 7-3/4" (196.9 mm) 0.20 lb (0.09 kg)
662 #2 Square-Recess Round 4" (101.6 mm) Red 8-1/4" (209.6 mm) 0.30 lb (0.14 kg)
663 #3 Square-Recess Round 4" (101.6 mm) Black 8-1/4" (209.6 mm) 0.30 lb (0.14 kg)
665 #1 Square-Recess Round 8" (203.2 mm) Green 11-3/4" (298.5 mm) 0.30 lb (0.14 kg)
666 #2 Square-Recess Round 8" (203.2 mm) Red 12-1/4" (311.2 mm) 0.40 lb (0.18 kg)
667 #3 Square-Recess Round 8" (203.2 mm) Black 12-1/4" (311.2 mm) 0.40 lb (0.18 kg)
668 #1 Square-Recess Round 1-1/2" (38.1 mm) Green 3-7/16" (87.3 mm) 0.15 lb (0.07 kg)
19542 T15 TORX® Round 4" (101.6 mm) Yellow 8-5/16" (211.1 mm) 0.20 lb (0.09 kg)
19543 T20 TORX® Round 4" (101.6 mm) Green 8-5/16" (211.1 mm) 0.25 lb (0.11 kg)
19544 T25 TORX® Round 4" (101.6 mm) Blue 8-5/16" (211.1 mm) 0.25 lb (0.11 kg)
19545 T27 TORX® Round 4" (101.6 mm) Brown 8-5/16" (211.1 mm) 0.25 lb (0.11 kg)
19546 T30 TORX® Round 4" (101.6 mm) Red 8-5/16" (211.1 mm) 0.25 lb (0.11 kg)

TORX® is a registered trademark of Acument Intellectual Properties, LLC.

Shank
Type

Shank
Length

Color
Code

Overall
Length

Weight

Cushion-Grip handle allows for

greater torque and comfort

660

Cat. No. Set Contains Weight

19555 TORX® Cushion-Grip Screwdriver Set 5 Pc 1.2 lb

Cat. No. Description

19542 T15 TORX® Screwdriver Round Shank
19543 T20 TORX® Screwdriver Round Shank
19544 T25 TORX® Screwdriver Round Shank
19545 T27 TORX® Screwdriver Round Shank
19546 T30 TORX® Screwdriver Round Shank

Cat. No. Set Contains Weight

85664 4 Piece Square Recess Screwdriver Set 1.5 lb

Cat. No. Description

660 #0 Square Recess Screwdriver 4" Shank
661 #1 Square Recess Screwdriver 4" Shank
662 #2 Square Screwdriver 4" Round Shank
663 #3 Square Recess Screwdriver 4" Shank

(0.5 kg)

(0.7 kg)

Miniature Screwdrivers

Includes core Cushion-Grip screwdriver features

Cat.

Tip

No.

Type

604-3 #0 Phillips Round 3" (76.2 mm) 5-3/4" (146.1 mm) 0.64 oz (18.1 g)
606-2 1/16" (1.59 mm) Keystone Round 2" (50.8 mm) 4-3/4" (120.7 mm) 0.48 oz (13.6 g)
607-3 3/32" (2.4 mm) Cabinet Round 3" (76.2 mm) 5-3/4" (146.1 mm) 0.64 oz (18.1 g)
607-4 3/32" (2.4 mm) Cabinet Round 4" (101.6 mm) 6-3/4" (171.5 mm) 0.64 oz (18.1 g)
608-2 1/8" (3.2 mm) Cabinet Round 2" (50.8 mm) 4-3/4" (120.7 mm) 0.48 oz (13.6 g)
608-3 1/8" (3.2 mm) Cabinet Round 3" (76.2 mm) 5-3/4" (146.1 mm) 0.64 oz (18.1 g)
608-4 1/8" (3.2 mm) Cabinet Round 4" (101.6 mm) 6-3/4" (171.5 mm) 0.80 oz (22.7 g)
608-6 1/8" (3.2 mm) Cabinet Round 6" (152.4 mm) 8-3/4" (222.3 mm) 0.80 oz (22.7 g)
608-8 1/8" (3.2 mm) Cabinet Round 8" (203.2 mm) 10-3/4" (273.1 mm) 0.80 oz (22.7 g)
608-10 1/8" (3.2 mm) Cabinet Round 10" (254.0 mm) 12-3/4" (323.9 mm) 0.80 oz (22.7 g)

50

Shank
Type

Shank
Length

Overall
Length

Weight

608-6

Cat. No. Set Contains Weight

85484 Mini Cushion-Grip Screwdriver Set 4 Pc 0.14 lb

Cat. No. Description

604-3 #0 Phillips Mini Screwdriver 3" Shank
606-2 1/16" Keystone Tip Mini Screwdriver 2"
607-3 3/32" Cabinet Tip Mini Screwdriver 3"
608-3 1/8" Cabinet Tip Mini Screwdriver 3"

(0.06 kg)

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

51

www.kleintools.com

Cushion-Grip Screwdrivers

Cushion-Grip Screwdrivers

Includes core Cushion-Grip screwdriver features plus:

Narrow cabinet-tip permits blade access where space is limited

•

Precision machined combo-tip designed for combination head screws

•

Precision machined Phillips tip provides a more consistent geometric symmetry

•

than conventional Phillips screwdrivers to accurately fit and torque without slippage
Heavy-duty square shank and hex bolster allows wrench-assisted turning

•

Bolster reinforces shank for hard use

•

601-6

600-4

600-1

Cat.

Tip

No.

Type

600-1 5/16" (7.9 mm) Cabinet Round 1-1/2" (38.1 mm) 3-7/16" (87.3 mm) 0.10 lb (0.05 kg)
601-3 3/16" (4.8 mm) Cabinet Round 3" (76.2 mm) 6-3/4" (171.5 mm) 0.10 lb (0.05 kg)
601-4 3/16" (4.8 mm) Cabinet Round 4" (101.6 mm) 7-3/4" (196.9 mm) 0.15 lb (0.07 kg)
601-6 3/16" (4.8 mm) Cabinet Round 6" (152.4 mm) 9-3/4" (247.7 mm) 0.15 lb (0.07 kg)
601-8 3/16" (4.8 mm) Cabinet Round 8" (203.2 mm) 11-3/4" (298.5 mm) 0.20 lb (0.09 kg)
601-10 3/16" (4.8 mm) Cabinet Round 10" (254.0 mm) 13-3/4" (349.3 mm) 0.20 lb (0.09 kg)
7314 #1 Combo Round 4" (101.6 mm) 8-11/32" (211.9 mm) 0.30 lb (0.14 kg)
7324 #2 Combo Round 4" (101.6 mm) 8-11/32" (211.9 mm) 0.30 lb (0.14 kg)
603-1 #2 Phillips Round 1-1/2" (38.1 mm) 3-7/16" (87.3 mm) 0.10 lb (0.05 kg)
603-3 #1 Phillips Round 3" (76.2 mm) 6-3/4" (171.5 mm) 0.15 lb (0.07 kg)
603-4 #2 Phillips Round 4" (101.6 mm) 8-1/4" (209.6 mm) 0.25 lb (0.11 kg)
603-6 #3 Phillips Round 6" (152.4 mm) 11" (279.4 mm) 0.35 lb (0.16 kg)
603-7 #2 Phillips Round 7" (177.8 mm) 11-5/16" (287.3 mm) 0.30 lb (0.14 kg)
603-10 #2 Phillips Round 10" (254.0 mm) 14-5/16" (363.5 mm) 0.35 lb (0.16 kg)

Heavy Duty

605-4 1/4" (6.4 mm) Cabinet Round 4" (101.6 mm) 8-11/32" (211.9 mm) 0.25 lb (0.11 kg)
605-6 1/4" (6.4 mm) Cabinet Round 6" (152.4 mm) 10-11/32" (262.7 mm) 0.30 lb (0.14 kg)
605-8 1/4" (6.4 mm) Cabinet Round 8" (203.2 mm) 12-11/32" (313.5 mm) 0.30 lb (0.14 kg)
605-10 1/4" (6.4 mm) Cabinet Round 10" (254.0 mm) 14-11/32" (364.3 mm) 0.35 lb (0.16 kg)

Heavy Duty with Bolster

600-4 1/4" (6.4 mm) Keystone Square 4" (101.6 mm) 8-11/32" (211.9 mm) 0.25 lb (0.11 kg)
600-6 5/16" (7.9 mm) Keystone Square 6" (152.4 mm) 10-15/16" (277.8 mm) 0.40 lb (0.18 kg)
600-8 3/8" (9.52 mm) Keystone Square 8" (203.2 mm) 13-7/16" (341.3 mm) 0.65 lb (0.29 kg)
600-12 1/2" (12.7 mm) Keystone Square 12" (304.8 mm) 17-7/16" (443.0 mm) 0.80 lb (0.36 kg)

Heavy Duty with Hex Bolster

602-3 7/32" (5.6 mm) Keystone Round 3" (76.2 mm) 6-3/4" (171.5 mm) 0.15 lb (0.07 kg)
602-4 1/4" (6.4 mm) Keystone Round 4" (101.6 mm) 8-11/32" (211.9 mm) 0.25 lb (0.11 kg)
602-6 5/16" (7.9 mm) Keystone Round 6" (152.4 mm) 10-15/16" (277.8 mm) 0.35 lb (0.16 kg)
602-8 3/8" (9.52 mm) Keystone Round 8" (203.2 mm) 13-7/16" (341.3 mm) 0.55 lb (0.25 kg)
602-10 3/8" (9.52 mm) Keystone Round 10" (254.0 mm) 15-7/16" (392.1 mm) 0.60 lb (0.27 kg)
602-12 3/8" (9.52 mm) Keystone Round 12" (304.8 mm) 17-7/16" (443.0 mm) 0.65 lb (0.29 kg)

Shank
Type

Shank
Length

Overall
Length

Weight

Cat. No. Set Contains Weight

85078 8 Piece Cushion-Grip Screwdriver Set 1.7 lb (0.8 kg)

Cat. No. Description

600-4 1/4" Screwdriver HD Square Shank
602-6 5/16" Keystone Tip Screwdriver 6" L
600-1 5/16" Cabinet Tip Screwdriver 1-1/2"
601-3 3/16" Cabinet Tip Screwdriver 3"
603-3 #1 Phillips Screwdriver 3" Round Shank
603-1 #2 Stubby Phillips Screwdriver 1-1/2"
603-4 #2 Phillips Screwdriver 4" Round Shank
603-6 #3 Phillips Screwdriver 6" Round Shank

Cat. No. Set Contains Weight

85076 7 Piece Cushion-Grip Screwdriver Set 1.5 lb (0.7 kg)

Cat. No. Description

600-4 1/4" Screwdriver HD Square Shank
602-6 5/16" Keystone Tip Screwdriver 6" L
601-3 3/16" Cabinet Tip Screwdriver 3"
601-6 3/16" Cabinet Tip Screwdriver 6"
605-4 1/4" Cabinet Tip Screwdriver 4" Shank
603-3 #1 Phillips Screwdriver 3" Round Shank
603-4 #2 Phillips Screwdriver 4" Round Shank

Cat. No. Set Contains Weight

85074 6 Piece Cushion-Grip Screwdriver Set 1.5 lb (0.7 kg)

Cat. No. Description

600-4 1/4" Screwdriver HD Square Shank
600-6 5/16" Keystone Screwdriver 6" SQ Shank
601-3 3/16" Cabinet Tip Screwdriver 3"
603-3 #1 Phillips Screwdriver 3" Round Shank
603-4 #2 Phillips Screwdriver 4" Round Shank
603-6 #3 Phillips Screwdriver 6" Round Shank

Cat. No. Set Contains Weight

85075 5 Piece Cushion-Grip Screwdriver Set 1.3 lb (0.6 kg)

Cat. No. Description

602-6 5/16" Keystone Tip Screwdriver 6" L
600-4 1/4" Screwdriver HD Square Shank
601-6 3/16" Cabinet Tip Screwdriver 6"
605-6 1/4" Cabinet Tip Screwdriver Heavy Duty 6"
603-4 #2 Phillips Screwdriver 4" Round Shank

Cat. No. Set Contains Weight

85105 4 Piece Cushion-Grip Screwdriver Set 1.5 lb (0.7 kg)

Cat. No. Description

600-6 5/16" Keystone Screwdriver 6" SQ Shank
600-4 1/4" Screwdriver HD Square Shank
601-6 3/16" Cabinet Tip Screwdriver 6"
603-4 #2 Phillips Screwdriver 4" Round Shank

Cat. No. Set Contains Weight

85071 2 Piece Stubby Screwdriver Set 0.30 lb (0.14 kg)

Cat. No. Description

600-1 5/16" Cabinet Tip Screwdriver 1-1/2"
603-1 #2 Stubby Phillips Screwdriver 1-1/2"

Cat. No. Set Contains Weight

32378 4" Combo Tip Driver Set 1.5 lb (0.7 kg)

Cat. No. Description

7314 #1 Combo-Tip Driver, 4" Fixed Blade
7324 #2 Combo Tip Driver, 4" Fixed Blade

Cat. No. Set Contains Weight

85072 2 Piece 10" Long Blade Screwdriver Set 0.70 lb (0.32 kg)

Cat. No. Description

603-10 #2 Phillips Screwdriver 10" Round Shank
605-10 1/4" Cabinet Tip Screwdriver 10" Shank

Cushion-Grip Screwdrivers

See page 310 for additional information on warnings.

www.kleintools.com

Demolition Screwdrivers

Includes core Cushion-Grip screwdriver features plus:

Engineered, manufactured and tested for prying, chiseling and punching

•

Plated metal strike cap to protect handle from hammer blows

•

Heat treated metal shaft runs complete length of handle to metal strike

•

cap to transfer metal strike force

Screwdrivers, Nut Drivers and Accessories

602-7DD

Cat.
No.

602-4DD 1/4" (6.4 mm) Cabinet Round 4" (101.6 mm) 9" (228.6 mm) 0.37 lb (0.17 kg)
602-7DD 5/16" (7.9 mm) Keystone Round 7" (177.8 mm) 12-3/8" (314.3 mm) 0.56 lb (0.25 kg)
6034DD #2 Phillips Round 4" (177.8 mm) 9" (228.6 mm) 0.37 lb (0.17 kg)

Tip
Type

Shank
Type

Shank
Length

Overall
Length

Weight

Electronics Screwdrivers

Includes core Cushion-Grip screwdriver features plus:

Rotating cap for optimum and precise control

•

Cat.

Tip

No.

Type

613-3 #0 Phillips Round 3" (76.2 mm) 6-1/2" (165.1 mm) 0.80 oz (22.7 g)
614-2 1/16" (1.59 mm) Cabinet Round 2" (50.8 mm) 5-1/2" (139.7 mm) 0.80 oz (22.7 g)
614-3 3/32" (2.4 mm) Cabinet Round 3" (76.2 mm) 6-1/2" (165.1 mm) 0.80 oz (22.7 g)
614-4 1/8" (3.2 mm) Cabinet Round 4" (101.6 mm) 7-1/2" (190.5 mm) 0.80 oz (22.7 g)
614-6 1/8" (3.2 mm) Cabinet Round 6" (152.4 mm) 9-1/2" (241.3 mm) 0.80 oz (22.7 g)

Shank
Type

Shank
Length

Overall
Length

Weight

Coated Screwdrivers

Includes core Cushion-Grip screwdriver features plus:

Plastic coated for circuit protection only. NOT INSULATED

•

Special plastic coating resists cutting, cracking and chipping

•

Thin coating permits use in confined areas

•

Cat. No. Set Contains Weight

32008 Demolition Driver Set 0.70 lb

Cat. No. Description

602-4DD 1/4" Keystone Demolition Driver, 4" Shank
6034DD #2 Phillips Demolition Driver, 4" Shank

Cat. No. Set Contains Weight

85614 5 Piece Electronics Screwdriver Set 0.80 lb

Cat. No. Description

614-2 1/16'' Slotted Electronics Screwdriver, 2'' Shank
614-3 3/32" Slotted Electronics Screwdriver, 3" Shank
614-4 1/8" Electronics Screwdriver 4" Shank
614-6 1/8" Electronics Screwdriver 6" Shank
613-3 #0 Phillips Electronics Screwdriver, 3" Shank

(0.32 kg)

614-6

(0.36 kg)

620-4

Cat. No. Tip Type Shank Type Shank Length Overall Length Weight

620-3 3/16" (4.8 mm) Cabinet Round 3" (76.2 mm) 6-3/4" (171.5 mm) 0.15 lb (0.07 kg)
620-4 1/4" (6.4 mm) Cabinet Round 4" (101.6 mm) 8-11/32" (211.9 mm) 0.20 lb (0.09 kg)
620-6 5/16" (7.9 mm) Cabinet Round 6" (152.4 mm) 10-15/16" (277.8 mm) 0.40 lb (0.18 kg)
620-8 3/8" (9.52 mm) Cabinet Round 8" (203.2 mm) 13-7/16" (341.3 mm) 0.60 lb (0.27 kg)
621-6 3/16" (4.8 mm) Cabinet Round 6" (152.4 mm) 9-3/4" (247.7 mm) 0.20 lb (0.09 kg)
621-8 3/16" (4.8 mm) Cabinet Round 8" (203.2 mm) 11-3/4" (298.5 mm) 0.20 lb (0.09 kg)

2-in-1 Rapi-Driv®

Interchangeable bit holder allows quick switching between tip styles

•

and works with other standard size bits
Crank-action handle allows you to spin screws fast with one hand

•

Blast finish bit provides firm grip on fasteners to reduce cam out

•

Cat. No. Phillips Bits Slotted Bits Shank Length Handle Color Overall Length Weight

67100 #2 3/16" (4.8 mm) 6" (152.4 mm) Black 9-3/4" (247.7 mm) 0.26 lb (0.12 kg)

52

67100

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

53

www.kleintools.com

Cushion-Grip Screwdrivers

Rapi-Driv® Screwdrivers

Crank-action handle spins screws fast with one hand

•

Saves time and effort, especially on long-threaded

•

screws in switch plates, light fixtures, etc.

Cat. No. Tip Type Shank Type Shank Length Overall Length Weight

670-3 3/16" (4.8 mm) Cabinet Round Rapi-Driv®4" (101.6 mm) 7-3/4" (196.9 mm) 0.15 lb (0.07 kg)
670-6 3/16" (4.8 mm) Cabinet Round Rapi-Driv®6" (152.4 mm) 9-3/4" (247.7 mm) 0.20 lb (0.09 kg)
671-6 1/4" (6.4 mm) Cabinet Round Rapi-Driv®6" (152.4 mm) 9-3/4" (247.7 mm) 0.20 lb (0.09 kg)
682-6 #2 Phillips Round Rapi-Driv®6" (152.4 mm) 9-3/4" (247.7 mm) 0.25 lb (0.11 kg)
691-6 #1 Square Round Rapi-Driv®6" (152 mm) 9-3/4" (248 mm) 0.35 lb (0.16 kg)

7-Piece Multiple-Application Screwdriver Set

Specialty set for a wide variety of applications

•

Cat. No. Set Contains Weight

85077 Multi Application Screwdriver Set 7 Pc 1.7 lb (0.8 kg)

Cat. No. Tip Type Shank Type Shank Length Overall Length

600-4 1/4" (6.4 mm) Keystone Square 4" (101.6 mm) 8-11/32" (211.9 mm)
602-6 5/16" (7.9 mm) Keystone Round 6" (152.4 mm) 10-15/16" (277.8 mm)
601-6 3/16" (4.8 mm) Cabinet Round 6" (152.4 mm) 9-3/4" (247.7 mm)
605-6 1/4" (6.4 mm) Cabinet Round 6" (152.4 mm) 10-11/32" (262.7 mm)
670-6 3/16" (4.8 mm) Cabinet Round

K36 1/4" (6.4 mm) Slotted Round 6" (152.4 mm) 9-3/4" (247.7 mm)
603-4 #2 Phillips Round 4" (101.6 mm) 8-1/4" (209.6 mm)

Rapi-Driv®

6" (152.4 mm) 9-3/4" (247.7 mm)

670-6

Adjustable Length Screwdrivers

Removable shank adjusts within 4" to 8" (102-208 mm) range

•

for numerous length combinations
Blades feature two tips for multiple screwdrivers in one tool

•

Proprietary system securely holds blade - as durable as a

•

traditional Klein fixed blade screwdriver
Press down to extend or lengthen the shank

•

Push up to retract or shorten the shank

•

Components sold separately

•

US Patent: 6,561,523

Cat. No. Type Tip

32751 Adjustable Length

32708 Adjustable Length

32709 Replacement Blade #1, #2 Square 7-3/4"

32713 Replacement Blade #1 Phillips,

32618 Replacement Blade #2 Phillips,

32619 Screwdriver Handle — — 5-3/8"

Screwdriver

Screwdriver

Size

#2 Phillips,
1/4" (6.4 mm) Slotted

#1, #2 Square 4" to 8"

3/16" (4.8 mm) Slotted

1/4" (6.4 mm) Slotted

Shank
Length

4" to 8" (101.6 to 203.2
mm)

(101.6 to 203.2 mm)

(196.9 mm)
7-3/4"

(196.9 mm)
4" to 8"

(101.6 to 203.2 mm)

Overall
Length

13-3/8"
(339.7 mm)

13-3/8"
(339.7 mm)

9"
(228.6 mm)

9"
(228.6 mm)

9-1/8"
(231.8 mm)

(136.5 mm)

Weight

0.70 lb
(0.32 kg)

0.10 lb
(0.05 kg)

0.10 lb
(0.05 kg)

0.10 lb
(0.05 kg)

0.25 lb
(0.11 kg)

0.20 lb
(0.09 kg)

4"8"

Cat. No. Set Contains Weight

32715 Adjustable Length Replacement Blade Set 0.10 lb

Cat. No. Description

32713 Adj. Length Blade, #1 PH, 3/16" Slotted
32618 Adj. Length Blade, #2, 1/4" Slotted
32709 Adj. Length Blade, Sq #1, #2

(0.05 kg)

85077

32751

1/4"

5/16"

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

www.kleintools.com

Specialty Cushion-Grip Screwdrivers

2-in-1 Hex Slide Driver/Nut Driver

Unique, patented tip switches from 1/4" size to 5/16" size

•

Magnetic regardless of which driver is selected

•

Twist the thumb nut to lock tip setting

•

U.S. Patent 7,654,175 B2

•

Cat. No. Type Tip Size Shank Length Overall Length Weight

65129 Hex Driver 1/4", 5/16" 6" (152.4 mm) 10-1/4" (260.4 mm) 0.50 lb (0.23 kg)

NEW!

65131 Hex Driver 1/4", 5/16" 1-1/2" (38.1 mm) 3-23/64" (85.3 mm) 0.18 lb (0.08 kg)

NEW!

NEW!

SLIDE

DRIVE

2-in-1 Hex Head Screwdriver

1/4" and 5/16" six-point hex nut driver

•

Powerful magnets for maximum fastener retention

•

Solid build quality; feels like a conventional nut driver

•

Color coded bands for easy identification

•

Wrench-assist to help remove stubborn fasteners

•

Cat. No. Type Tip Size Shank Length Overall Length Weight

65064 Hex Driver 1/4" and 5/16" 3-5/8" (92.1 mm) 8" (203.2 mm) 0.10 lb (0.05 kg)

65129

65064

Screw-Holding Screwdrivers

Starts and drives screws with one hand when

•

working in hard-to-reach spaces

Cat. No. Tip Type Shank Type Shank Length Overall Length Weight

32215 1/4" (6.4 mm) Cabinet Round 7" (177.8 mm) 11-1/4" (285.8 mm) 0.32 lb (0.15 kg)
32216 #2 Phillips Round 7" (177.8 mm) 11-1/4" (285.8 mm) 0.32 lb (0.15 kg)

Terminal Block Screwdriver

Includes core Cushion-Grip screwdriver features plus:

Provides exact fit for terminal block screws

•

Tip is up to 19% stronger than competitors and provides 76% higher

•

torque value than the required ASME B107 Standard

Cat. No. Tip Type Shank Type Shank Length Overall Length Weight

612-4 1/8" (3.2 mm) Cabinet Round 4" (101.6 mm) 7-3/4" (196.9 mm) 0.15 lb (0.07 kg)

32215

612-4

54

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

55

www.kleintools.com

Specialty Cushion-Grip Screwdrivers

Wire Bending Screwdrivers

Includes core Cushion-Grip screwdriver features plus:

Metal stud offers a convenient and easy way to bend, loop

•

and connect solid wire when installing outlets and switches

Cat. No. Bends Tip Type Tip Size Shank Type Shank Length Overall Length Weight

605-4B AWG Gauges Nos. 10, 12, 14 Cabinet 1/4" (6.4 mm) Round 4" (101.6 mm) 8-11/32" (211.9 mm) 0.25 lb (0.11 kg)
605-6B AWG Gauges Nos. 10, 12, 14 Cabinet 1/4" (6.4 mm) Round 6" (152.4 mm) 10-11/32" (262.7 mm) 0.30 lb (0.14 kg)
603-4B AWG Gauges Nos. 10, 12, 14 Phillips #2 Round 4" (101.6 mm) 8-5/16" (211.1 mm) 0.25 lb (0.11 kg)

605-6B

Multi-Bit Cushion-Grip Screwdrivers/Nut Drivers

15-in-1 Screwdriver/Nut Drivers

Includes 14 different screwdriver tips plus a 1/4" (6.4

•

mm) nut driver
Internal storage for screwdriver bits

•

Cat. No. Description Nut Driver

32290 Multi-Bit Screwdriver

32291 Tamperproof Multi-Bit

32292 HVAC Multi-Bit

Schrader® is a registered trademark of Schrader-Bridgeport International, Inc. TORX® is a registered trademark of Acument Intellectual Properties, LLC.

with Storage 15 Pc

Screwdriver 15 Pc

Screwdriver 15 Pc

Sizes

1/4" #0, #1,

1/4" — — — Pins: 1/8",

1/4" #0, #1,

Phillips
Bits

#2, #3

#2, #3

Slotted
Bits

4 mm,
6 mm

4 mm,
6 mm

INTERNAL STORAGE

in handle

Square

Hex

Bits

Bits

#1, #2 — #1, #2 #10, #15,

9/64", 5/32",
3/16"

#1, #2 — — #10, #15,

Combo
Bits

— Pins: #10,

TORX®
Bits

#20, #25

#15, #20,
#25, #27,
#30

#20, #25

Other
Bits

— 4"

Spanners: #6,
#8, #10, #12

Schrader Valve
Insertion, Core
Removal

11-in-1 Combo-Tip Screwdriver/Nut Driver

Precision machined tip designed for combination head screws

•

Shank
Length

(101.6 mm)
4"

(101.6 mm)

4"
(101.6 mm)

Handle
Color

Black 8-1/2"

Black 8-1/2"

Black 8-1/2"

Overall
Length

(215.9 mm)

(215.9 mm)

(215.9 mm)

32290

Weight

0.50 lb
(0.23 kg)

0.50 lb
(0.23 kg)

0.50 lb
(0.23 kg)

32505

Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Square Bits Combo Bits Shank Length Handle Color Overall Length Weight

32505 1/4", 5/16" 3/8" #1, #2 1/4" (6.4 mm),

5/16" (7.9 mm)

#1, #2 #1, #2 4"

(101.6 mm)

Yellow/Black 7-1/4"

(184.2 mm)

0.50 lb
(0.23 kg)

1/4"

5/16"

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

www.kleintools.com

Multi-Bit Cushion-Grip Screwdrivers/Nut Drivers

11-in-1 Screwdriver/Nut Driver with
Schrader® Valve Removal/Installation Bit

Great for HVAC and other industrial applications

•

Includes unique style bit for installation/removal of common TR-4

•

Schrader® valves and aggressive thread extractor tip for backing out
broken cores

Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Square Bits Other Bits Shank Length Handle Color Overall Length Weight

32527 3/8", 5/16", 1/4" #1, #2 1/4" (6.4 mm),

Schrader® is a registered trademark of Schrader International, Inc.

3/16" (4.8 mm)

#1, #2 Schrader Valve Insertion,

Core Removal

3"
(76.2 mm)

Yellow/Black 7-3/4"

(196.9 mm)

0.44 lb
(0.20 kg)

32527

8-in-1 HVAC Slide Driver™ Screwdriver/Nut Driver

Unique, patented head slides back and forth to switch

•

from 1/4" to 5/16" magnetic hex-head screwdriver
Thumb nut locks tip setting

•

Features a specialty bit for installation/removal of common TR-4 Schrader® valves

•

Includes 1/4" and 3/8" hollow nut drivers, as well as #2 Phillips,

•

1/8" (3 mm) and 1/4" (6 mm) slotted screwdriver tips
Great for HVAC applications including thermostat installation and control work

•

U.S. patent 7,654,175 B2

•

Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Other Bits Shank Length Handle Color Overall Length Weight

32596 1/4", 5/16", 3/8" #2 1/8" (3.2 mm),

NEW!

Schrader® is a registered trademark of Schrader-Bridgeport International, Inc.

1/4" (6.4 mm)

NEW!

Schrader® Valve Core
Removal

3-1/4"
(82.6 mm)

SLIDE

DRIVE

Yellow/Black 7-1/2"

(190.5 mm)

0.50 lb
(0.2 kg)

4-in-1 Electronics Precision Screwdrivers

Four different tips in one tool

•

Rotating cap for optimum and precise control

•

32596

32581

Cat. No. Phillips Bits Slotted Bits TORX® Bits Shank Length Handle Color Overall Length Weight

32581 #0, #00 1/8" (3.2 mm), 3/32" (2.4 mm) — 2-51/64" (71.0 mm) Yellow/Black 6-1/2" (165.1 mm) 1.1 oz (31 g)

NEW!

32585 — — T7, T8, T10, T15 2-51/64" (71.0 mm) Yellow/Black 6-1/2" (165.1 mm) 1.1 oz (31 g)

TORX® is a registered trademark of Acument Intellectual Properties, LLC.

56

Additional and replacement bits can be found on page 74

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

57

www.kleintools.com

Multi-Bit Cushion-Grip Screwdrivers/Nut Drivers

Ratcheting Multi-Bit Screwdriver/Nut Driver

High torque 3-way ratcheting mechanism, forward, reverse and locked

•

positions for tough applications
Interchangeable shaft holds six universal tips; converts to three nut driver

•

sizes and one hex driver
Strong, heat-treated nut drivers for improved torque

•

Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Square Bits Hex Bits Shank Length Handle Color Overall Length Weight

32558 1/4", 5/16", 3/8" #1, #2 1/4" (6.4 mm),

3/16" (4.8 mm)

6-in-1 Ratcheting Stubby Screwdrivers

Ratcheting mechanism allows user to work faster with more efficiency

•

#1, #2 3/8" 2-61/64"

(75.0 mm)

Yellow/Black 7-57/64"

(200.4 mm)

0.48 lb
(0.22 kg)

32558

Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Square Bits Shank Length Handle Color Overall Length Weight

32593 1/4", 5/16" #1, #2 1/4" (6.4 mm),

32594 1/4", 5/16" #2 3/16" (4.8 mm) #1, #2 1-19/64"

3/16" (4.8 mm)

— 1-19/64"

(32.9 mm)

(32.9 mm)

Yellow/Black 3-1/2"

Yellow/Black 3-1/2"

(88.9 mm)

(88.9 mm)

0.10 lb
(0.05 kg)

0.10 lb
(0.05 kg)

Heavy-Duty Multi-Bit Screwdriver/Nut Driver

Superior torque for tough applications

•

Interchangeable shaft holds six universal tips; converts to three nut driver

•

sizes and one hex driver
Strong, heat-treated nut drivers for improved torque

•

32593

32557

Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Square Bits Hex Bits Shank Length Handle Color Overall Length Weight

32557 1/4", 5/16", 3/8" #1, #2 1/4" (6.4 mm),

3/16" (4.8 mm)

Additional and replacement bits can be found on page 74

#1, #2 3/8" 2-61/64"

(75.0 mm)

Yellow/Black 7-57/64"

(200.4 mm)

0.48 lb
(0.22 kg)

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

www.kleintools.com

Multi-Bit Cushion-Grip Screwdrivers/Nut Drivers

Multi-Bit Screwdriver/Nut Drivers

Integrated screwdriver/nut driver shaft holds popular tips and converts nut driver sizes

•

Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Square Bits TORX® Bits Shank Length Handle Color Overall Length Weight

32476 5/16" #1, #2 1/4" (6.4 mm),

32477 5/16", 1/4" #1, #2 1/4" (6.4 mm),

32500 3/8", 5/16", 1/4" #1, #2 1/4" (6.4 mm),

Cat. No. 32476 has 5/16" nut driver only, TORX® is a registered trademark of Acument Intellectual Properties, LLC

3/16" (4.8 mm)

3/16" (4.8 mm)

3/16" (4.8 mm)

— — 4"

#1, #2 T10, T15 4"

#1, #2 T10, T15 3"

(101.6 mm)

(101.6 mm)

(76.2 mm)

Yellow/Black 7-3/4"

Yellow/Black 7-3/4"

Yellow/Black 7-1/4"

(196.9 mm)

(196.9 mm)

(184.2 mm)

0.48 lb
(0.22 kg)

0.50 lb
(0.23 kg)

0.50 lb
(0.23 kg)

32476

Stubby Multi-Bit Screwdriver/Nut Driver

Compact design features standard 1-1/4" (32 mm) shaft allowing easy access to tight work spaces

•

Shaft holds four universal tips and converts to two nut driver sizes

•

Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Square Bits Shank Length Handle Color Overall Length Weight

32561 1/4", 5/16" #1, #2 3/16" (4.8 mm),

32562 1/4", 5/16" #2 3/16" (4.8 mm) #1, #2 1-17/64"

1/4" (6.4 mm)

— 1-17/64"

(32.1 mm)

(32.1 mm)

Yellow/Black 3-13/32"

Yellow/Black 3-13/32"

(86.5 mm)

(86.5 mm)

0.16 lb
(0.07 kg)

0.16 lb
(0.07 kg)

Extended-Reach Multi-Bit Screwdrivers/Nut Drivers

Interchangeable shaft holds four universal tips and converts to two nut driver sizes

•

Extended shafts and blades provide 39% longer reach

•

Small diameter shaft for comfortable grip and quick, easy turning

•

32561

32559

Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Square Bits Shank Length Handle Color Overall Length Weight

32559 1/4", 5/16" #1, #2 1/4" (6.4 mm),

32560 1/4", 5/16" #2 1/4" (6.4 mm) #1, #2 4-7/64"

3/16" (4.8 mm)

58

— 4-7/64"

Additional and replacement bits can be found on page 74

(104.4 mm)

(104.4 mm)

Yellow/Black 9-7/64"

Yellow/Black 9-7/64"

(231.4 mm)

(231.4 mm)

0.41 lb
(0.19 kg)

0.41 lb
(0.19 kg)

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

59

www.kleintools.com

Multi-Bit Screwdrivers/Nut Drivers

10-in-1 Folding Screwdriver/Nut Driver

Conveniently folds up for easy storage or to fit into your pocket

•

Each driver arm contains four interchangeable bit styles and two nut drivers

•

Unfold each driver arm up to a full 180° for straight on driving power, or at

•

90° for extra leverage on stubborn fasteners
The quick release button easily unlocks a fully extended driver arm

•

32434

®

Schrader

Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Square Bits Hex Bits TORX® Bits Other Bits Handle Color Weight

32534 5/16", 1/4" #1, #2 1/4" (6.4 mm),

32535 5/16", 1/4" #1, #2 1/4" (6.4 mm),

32536 5/16", 1/4" — — — — T6, T7, T8, T10,

32537 5/16", 1/4" — — — — T7, T8, T9, T10,

32538 5/16", 1/4" — — — 1/16", 5/64", 3/32", 7/64", 1/8",

32539 5/16", 1/4" — — — 0.9 mm, 1.3 mm, 1.5 mm, 2 mm,

Schrader® is a registered trademark of Schrader-Bridgeport International, Inc., TORX® is a registered trademark of Acument Intellectual Properties, LLC.

32535

Standard

3/16" (4.8 mm)

3/16" (4.8 mm)

32536

®

TORX

#1, #2 — — Valve Core Removal/

#1, #2 — T10, T15 — Black 0.37 lb

9/64", 5/32", 3/16"

2.5 mm, 3 mm, 4 mm, 5 mm

32537

Tamperproof TORX

®

T15, T20, T25, T27

T15, T20, T25, T27

32538

Standard Hex

Installation - Extractor

— Green 0.37 lb

— Green 0.37 lb

— — Red 0.37 lb

— — Blue 0.37 lb

32539

Metric Hex

Blue 0.37 lb

(0.17 kg)

(0.17 kg)

(0.17 kg)

(0.17 kg)

(0.17 kg)

(0.17 kg)

32535

Magnetic Screwdriver Bit Sets

Non-Ratcheting Magnetic Screwdriver
with 32-Piece Tamperproof Bit Set

Sturdy bit and screw holding magnet allows for screws to fit securely

•

in place for easy use
Durable PVC black block allows for easy storage of standard 1/4" bits

•

Includes complete tamperproof bit set in block

•

TAMERPROOF BIT SET INCLUDED
WITH SET, ALSO SOLD SEPARATELY

32525

Cat. No. Nut Driver

Sizes

32510 1/4" — — — 3/32", 7/64", 1/8", 9/64", 5/32",

32-Piece Bit Sets

Cat. No. Nut Driver

Sizes

32526 — #0, #1,

32525 — — — — 5/64" (2 mm), 3/32" (2.4 mm), 7/64" (2.8 mm),

TORX® is a registered trademark of Acument Intellectual Properties, LLC. TORQ-SET® and Tri-Wing® are registered trademarks of Phillips Screw Co.

Phillips
Bits

Phillips
Bits

#2, #3

Slotted
Bits

Slotted
Bits

3-4, 5-6,
6-8, 8-10,
10-12, 12-14
Screw Sizes

Square
Bits

Square
Bits

#1, #2, #3 2mm, 3/32", 7/64", 1/8", 9/64", 4mm, 3/16" T6, T7, T8,

Hex Bits TORX® Bits Other Bits Shank

3/16", 2 mm, 2.5 mm, 3 mm,
4 mm, 5 mm

Hex Bits TORX®

1/8" (3.2 mm), 9/64" (3.6 mm),
5/32" (4.0 mm), 3/16" (4.8 mm), 2 mm,

2.5 mm, 3 mm, 4 mm, 5 mm

Spanner: 4, 6, 8, 10;

Tri-Wing®: 1, 2;
TORQ-SET®: 6, 8, 10

Bits

T10, T15,
T20, T25

T7, T8, T10,
T15, T20,
T25, T27,
T30, T40

Other Bits Shank

Clutch: 5/32" (4 mm),

3/16" (4.8 mm)

Spanner: 4, 6, 8, 10;
Tri-Wing: 1, 2, 3, 4

Length

3-1/2"
(88,9 mm)

Length

Handle
Color

Yellow/
Black

Handle
Color

— — 1"

— — 1"

STANDARD BIT SET
SOLD SEPARATELY

32526

Overall
Length

8"
(203.2 mm)

Overall
Length

(25.4 mm)

(25.4 mm)

32510

Weight

0.71 lb
(0.32 kg)

Weight

0.43 lb
(0.20 kg)

0.43 lb
(0.20 kg)

Additional and replacement bits can be found on page 74

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

www.kleintools.com

Multi-Bit Screwdriver/Nut Driver Replacement Parts and Bits

Replacement Parts for Multi-Bit
Screwdriver/Nut Drivers

Precision-machined tips for exact fit into fastener

•

32398

32396

32397

32484

32478

32784

32781

13105

Cat. No. Tip Type For Use With Package

32392 — Heavy Duty (32557) and Ratcheting (32558) 1 Piece
32394 — Heavy Duty (32557) and Ratcheting (32558) 2 Piece
32395 — Extended Reach Drivers (32559 and 32560) 1 Piece
32396 — Stubby Drivers (32561 and 32562) 1 Piece
32397 #2 Phillips; #1 Square Heavy Duty (32557) and Ratcheting (32558) 2 Bits
32398 #1 Phillips; 1/4" (6.4 mm) Slotted Heavy Duty (32557), Ratcheting (32558) and Stubby (32561) 2 Bits
32399 #2 Square; 3/16" (4.8 mm) Slotted Heavy Duty (32557) and Ratcheting (32558) 2 Bits
32400 #1, #2 Phillips Extended Reach (32559) 2 Bits
32401 3/16" (4.8 mm), 1/4" 6.4 mm) Slotted Extended Reach (32559) 2 Bits
32410 #2 Square; #2 Phillips Stubby Driver (32560) 2 Bits
32411 #1 Square; 1/4" (6.4 mm) Slotted Stubby Driver (32560) 2 Bits
32412 #2 Phillips; 3/16" (4.8 mm) Slotted Stubby Driver (32561) 2 Bits
32478 #1 Phillips; 3/16" (4.8 mm) Slotted 5-in-1 (32476) 1 Bit
32479 #2 Phillips; 9/32" (7.1 mm) Slotted 5-in-1 (32476) 1 Bit
32482 #1 Phillips; 3/16" (4.8 mm) Slotted 10-in-1, 11-in-1 and 10-Fold™ 2 Bits
32483 #2 Phillips; 1/4" (6.4 mm) Slotted 10-in-1, 11-in-1 and 10-Fold™ 2 Bits
32484 #1, #2 Square 10-in-1, 11-in-1 and 10-Fold™ 2 Bits
67101 #2 Phillips, 3/16" (4.8 mm) Slotted 2-in-1 Rapi-Driv®, 10-in-1, 11-in-1 and 10-Fold 2 Bits
32540 TT7, TT8 TORX® 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32541 TT9, TT10 TORX® 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32542 TT15, TT20 TORX® 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32543 TT25, TT27 TORX® 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32544 T6,T7 TORX® 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32485 T10 and T15 TORX® 10-in-1, 11-in-1 and 10-Fold™ 2 Bits
32545 T8, T10 TORX® 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32546 T25, T27 TORX® 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32547 3/32", 7/64" Hex 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32548 5/32", 3/16" Hex 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32549 1/6", 5/64" Hex 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32550 1/8", 9/64" Hex 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32551 0.9 mm, 1.3 mm Hex 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32552 1.5 mm, 2.0 mm Hex 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32553 2.5 mm, 3.0 mm Hex 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32554 4.0 mm, 5.0 mm Hex 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 2 Bits
32752 #1, #2 Combo Combo-Tip Multi-Tool (32505) 2 Bits
32528 Schrader® Valve Core Tool 11-in-1 Schrader (32527) 1 Bit
32770 #1, #2 Phillips 15-in-1 Screwdrivers (32290, 32291, 32292) 1 Bit
32771 #0, #3 Phillips 15-in-1 Screwdrivers (32290, 32291, 32292) 1 Bit
32772 #1, #2 Square 15-in-1 Screwdrivers (32290, 32291, 32292) 1 Bit
32773 T10, T15 TORX® 15-in-1 Screwdrivers (32290, 32291, 32292) 1 Bit
32774 T20, T25 TORX® 15-in-1 Screwdrivers (32290, 32291, 32292) 1 Bit
32775 4 mm, 6 mm Slotted 15-in-1 Screwdrivers (32290, 32291, 32292) 1 Bit
32776 #1, #2 Combo 15-in-1 Screwdrivers (32290, 32291, 32292) 1 Bit
32777 6, 8 Spanner 15-in-1 Screwdrivers (32290, 32291, 32292) 1 Bit
32778 10, 12 Spanner 15-in-1 Screwdrivers (32290, 32291, 32292) 1 Bit
32779 1/8, 9/64 Hex Pin 15-in-1 Screwdrivers (32290, 32291, 32292) 1 Bit
32780 5/32, 3/16 Hex Pin 15-in-1 Screwdrivers (32290, 32291, 32292) 1 Bit
32781 10, 15 Tamperproof 15-in-1 Tamperproof Screwdriver (32291) 1 Bit
32782 20, 25 Tamperproof 15-in-1 Tamperproof Screwdriver (32291) 1 Bit
32783 27, 30 Tamperproof 15-in-1 Tamperproof Screwdriver (32291) 1 Bit
32784 Schrader® Valve Core Tool 15-in-1 HVAC Screwdriver (32292) 1 Bit
13391 #0 Phillips; 3/32" (2.4 mm) Slotted 4-in-1 Electronics Screwdriver (32581, 32585) 2 Bits
13392 #00 Phillips; 1/8" (3.2 mm) Slotted 4-in-1 Electronics Screwdriver (32581, 32585) 2 Bits
13104 T7, T10 Tamperproof TORX® 4-in-1 Electronics Screwdrivers (32581, 32585) 2 Bits
13105 T8, T15 TORX® 4-in-1 Electronics Screwdrivers (32581, 32585) 2 Bits
13231 Schrader® Valve Core Tool;

1/8" (3.2 mm) Slotted

HVAC 8-in-1 Slide Driver™ Screwdriver/Nut Driver (32596) 1 Bit

Quantity

60

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

61

www.kleintools.com

Meets or exceeds applicable

ASME / ANSI and MIL specifications

Plastic-Handle Screwdrivers

Tough amber plastic handle

Nickel-chrome, precision-forged

and polished blades with black tips

Chrome-plated shank helps

prevent corrosion

Internal flanges provide solid,

twist-resistant shaft anchor.

Plastic-Handle Screwdrivers

Includes core Plastic-Handle Screwdriver features plus:

Precision-machined Phillips tips provide a more consistent geometric

•

symmetry to ensure accurate fit and torque without slippage
Small-diameter cabinet-tip shanks for use in recessed holes or tight

•

places and is well-suited for electrical and telecommunications work
35% larger than comparable screwdriver handles, the oversided Bull

•

Driver handles deliver up to 50% extra power to perform tough jobs
with minimal effort

Cat. No. Tip

Type

P18 #1 Phillips Round 8" (203.2 mm) 11-1/2" (292.1 mm) 0.15 lb (0.07 kg)
P28 #2 Phillips Round 8" (203.2 mm) 11-5/8" (295.3 mm) 0.20 lb (0.09 kg)
P212 #2 Phillips Round 12" (304.8 mm) 15-5/8" (396.9 mm) 0.25 lb (0.11 kg)
P202 #2 Phillips Round 20" (508.0 mm) 24-1/2" (622.3 mm) 0.55 lb (0.25 kg)
A000 3/32" (2.4 mm) Keystone Round 1-1/2" (38.1 mm) 2-7/8" (73.0 mm) 0.32 oz (9.1 g)
A216-3 1/8" (3.2 mm) Cabinet Round 3" (76.2 mm) 6" (152.4 mm) 0.80 oz (22.7 g)
A216-4 1/8" (3.2 mm) Cabinet Round 4" (101.6 mm) 7" (177.8 mm) 0.80 oz (22.7 g)
A216-6 1/8" (3.2 mm) Cabinet Round 6" (152.4 mm) 9" (228.6 mm) 0.80 oz (22.7 g)
A216-8 1/8" (3.2 mm) Cabinet Round 8" (203.2 mm) 11" (279.4 mm) 0.80 oz (22.7 g)
A216-10 1/8" (3.2 mm) Cabinet Round 10" (254.0 mm) 13" (330.2 mm) 0.80 oz (22.7 g)
A316-4 3/16" (4.8 mm) Cabinet Round 4" (101.6 mm) 7-5/8" (193.7 mm) 0.10 lb (0.05 kg)
A316-6 3/16" (4.8 mm) Cabinet Round 6" (152.4 mm) 9-5/8" (244.5 mm) 0.10 lb (0.05 kg)
A316-8 3/16" (4.76 mm) Cabinet Round 8" (203.2 mm) 11-5/8" (295.27 mm) 0.15 lb (0.07 kg)
A316-10 3/16" (4.8 mm) Cabinet Round 10" (254.0 mm) 13-5/8" (346.1 mm) 0.20 lb (0.09 kg)
70155 3/16" (4.8 mm) Cabinet Round 20" (508.0 mm) 24-1/2" (622.3 mm) 0.45 lb (0.20 kg)

Bull Driver™ Plastic Handle Screwdrivers

BD284 1/4" (6.4 mm) Keystone Square 4" (101.6 mm) 8-1/2" (215.9 mm) 0.25 lb (0.11 kg)
BD286 1/4" (6.35 mm) Keystone Square 6" (152.4 mm) 10-1/2" (266.7 mm) 0.30 lb (0.14 kg)
BD306 5/16" (7.9 mm) Keystone Square 6" (152.4 mm) 11-3/16" (284.2 mm) 0.35 lb (0.16 kg)
BD308 5/16" (7.9 mm) Keystone Square 8" (203.2 mm) 13-3/16" (335.0 mm) 0.40 lb (0.18 kg)
BD410 3/8" (9.52 mm) Keystone Square 10" (254.0 mm) 15-3/16" (385.8 mm) 0.60 lb (0.27 kg)
BD412 3/8" (9.52 mm) Keystone Square 12" (304.8 mm) 17-3/16" (436.6 mm) 0.75 lb (0.34 kg)
BD144 1/4" (6.4 mm) Keystone Round 4" (101.6 mm) 8-1/2" (215.9 mm) 0.25 lb (0.11 kg)
BD146 1/4" (6.4 mm) Keystone Round 6" (152.4 mm) 10-1/2" (266.7 mm) 0.25 lb (0.11 kg)
BD156 5/16" (7.9 mm) Keystone Round 6" (152.4 mm) 11-3/16" (284.2 mm) 0.35 lb (0.16 kg)
BD408 3/8" (9.52 mm) Keystone Round 8" (203.2 mm) 13-3/16" (335.0 mm) 0.50 lb (0.23 kg)
BD510 3/8" (9.52 mm) Keystone Round 10" (254 mm) 15-3/16" (385.76 mm) 0.55 lb (0.25 kg)
BD512 3/8" (9.5 mm) Keystone Round 12" (305 mm) 17-3/16" (437 mm) 0.60 lb (0.27 kg)
BD111 #1 Phillips Round 3" (76.2 mm) 6-5/8" (168.3 mm) 0.10 lb (0.05 kg)
BD122 #2 Phillips Round 4" (101.6 mm) 8-1/2" (215.9 mm) 0.20 lb (0.09 kg)
BD133 #3 Phillips Round 6" (152.4 mm) 11-3/16" (284.2 mm) 0.35 lb (0.16 kg)

Shank
Type

Shank
Length

Overall
Length

Weight

Smooth Comfordome® handles

fit the palm of the hand comfortably.

P28

BD306

Cat. No. Set Contains Weight

85276 7 Piece Combination Screwdriver Set 1.1 lb

Cat. No. Description

BD284 Keystone Tip Screwdriver 4" Square Shank
BD306 5/16" Keystone Screwdriver 6" Shank
A216-3 1/8" Cabinet Tip Screwdriver 3" Shank
A216-4 Cabinet Tip Screwdriver 4" Round Shank
A216-6 Cabinet Tip Screwdriver 6" Round Shank
BD111 Profilated #1 Phillips Screwdriver 3"
BD122 Profilated #2 Phillips Screwdriver 4"

(0.5 kg)

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

www.kleintools.com

Plastic-Handle Screwdrivers

Pocket-Clip Screwdrivers

Includes core Plastic-Handle Screwdriver features plus:

Specially designed for delicate instrument work

•

Cat. No. Tip Type Shank Type Shank Length Overall Length Weight

A130-2 1/8" (3.2 mm) Keystone Round 2" (50.8 mm) 3-7/8" (98.4 mm) 0.80 oz (22.7 g)
A130-3 1/8" (3.2 mm) Keystone Round 3" (76.2 mm) 4-7/8" (123.8 mm) 0.64 oz (18.1 g)
A116-2 3/32" (2.4 mm) Keystone Round 2" (50.8 mm) 4-7/16" (112.7 mm) 0.80 oz (22.7 g)
A116-3 3/32" (2.4 mm) Keystone Round 3" (76.2 mm) 5-7/16" (138.1 mm) 0.48 oz (13.6 g)
A131-2 1/8" (3.2 mm) Keystone Round 2" (50.8 mm) 4-7/16" (112.7 mm) 0.80 oz (22.7 g)
P12 #0 Phillips Round 2-1/2" (63.5 mm) 5" (127.0 mm) 0.80 oz (22.7 g)

Magnetic Plastic-Handle Screwdriver

Powerful magnet built into its shank to hold interchangeable bits

•

and also screws
Comfortable handle for easier driving

•

Interchangeable bits store inside handle for quick access

•

Wide selection of bits for different screw types

•

A116-3

70035

Cat. No. Phillips Bits Slotted Bits Shank Length Handle Color Overall Length Weight

70035 #1, #2 3/16" (4.8 mm), 9/32" (7.1 mm) 3-3/4" (95.3 mm) Black and Clear 3-7/16" 0.25 lb (0.11 kg)

Slotted Plastic-Handle Screw-Holding Screwdrivers

Positive gripping action holds, starts, and drives slotted

•

screws in awkward, hard-to-reach places
Split-blade screw-holding driver wedges into screw slot

•

Not designed for torquing or tightening

•

Cat. No. Overall Length Shank Type Tip Type Weight

K23 5-1/4" (133.4 mm) Round 3/16" (4.8 mm) Slotted 0.80 oz (22.7 g)
K28 10-1/4" (260.4 mm) Round 3/16" (4.8 mm) Slotted 0.10 lb (0.05 kg)
K34 7-3/4" (196.9 mm) Round 1/4" (6.4 mm) Slotted 0.10 lb (0.05 kg)
K36 9-3/4" (247.7 mm) Round 1/4" (6.4 mm) Slotted 0.15 lb (0.07 kg)
K38 11-3/4" (298.5 mm) Round 1/4" (6.4 mm) Slotted 0.20 lb (0.09 kg)
K44 8-1/4" (209.6 mm) Round 5/16" (7.9 mm) Slotted 0.25 lb (0.11 kg)
K46 10-1/4" (260.4 mm) Round 5/16" (7.9 mm) Slotted 0.25 lb (0.11 kg)
K48 12-1/4" (311.2 mm) Round 5/16" (7.9 mm) Slotted 0.30 lb (0.14 kg)

Precision blade for use with small precision screws. Blade thickness of 0.028" expanding to 0.045".
‡ Blade thickness of 0.043" expanding to 0.085". K21 and K23 have pocket clips.

Cat. No. Set Contains Weight

SK234 Slotted Holding Screwdriver Set 3 Pc 0.40 lb

Cat. No. Description

K23 3/16" Screw Holding Screwdriver 3"
K34 Slotted Screw Holding Screwdriver 4"
K46 Slotted Holding Screwdriver 10-1/4" L

(0.18 kg)

K36

62

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

63

www.kleintools.com

Screw-Holding Screwdrivers

Phillips-Tip Screw-Holding Screwdrivers

Positive gripping action holds and starts Phillips screws in awkward, hard-to-reach places

•

Blade separates to hold the fastener

•

Not designed for torquing or tightening

•

Cat. No. Overall Length Shank Type Tip Type Weight

K14 5" (127.0 mm) Round Phillips 0.80 oz (22.7 g)
K16 7" (177.8 mm) Round Phillips 0.80 oz (22.7 g)
K19 9" (228.6 mm) Round Phillips 0.80 oz (22.7 g)

Impact and Torque Drivers

Reversible Impact-Driver Set

Rugged, hand-impact driver turns rusted, frozen, or other stubborn screws

•

Can also be used with 3/8" square-drive impact sockets

•

Internal, spring-loaded, helical design transforms the impact of a hammer blow to

•

up to 200 ft.-lbs. of shock torque
Easily reverses for tightening or loosening screws

•

Constructed of high-grade alloy steel that has been heat-treated for added strength

•

Reclosable, seal-tight vinyl pouch with hang-up grommet

•

K16

70229

BITS FOR IMPACT
DRIVER SET

Cat. No. Phillips Bits Nut Driver Sizes Slotted Bits Included Weight

70220 #2 and #4 5/16" 5/16" (7.9 mm) and 1/2" (12.7 mm) 3/8" (9.5 mm) Square Drive fitting Adapter 2.2 lb (1.0 kg)

Torque Screwdriver Set

Compact, easy to use set includes the Torque Screwdriver, a 6-piece bit set

•

and a rugged case with foam inserts for a tight, organized fit
Increased usability and readability plus a wider torque range (5-40 in. lbs)

•

Tri-lobular design with a textured finish for better grip

•

Lightweight, aluminum frame

•

N.I.S.T. traceable calibration certificate

•

Set includes six 3-1/2" (89 mm) power drivers and a 1/4" nut driver

•

Cat. No. Included Weight

57032 Phillips: #1 and #2;

Slotted: 3/16" (4.8 mm) and 1/4" (6.4 mm);
Square: #1 and #2 and 1/4" Nut Driver

1.0 lb (0.5 kg)

70220

57032

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

www.kleintools.com

Heavy-Duty Cushion-Grip Nut Drivers

Through-handle full-hollow shaft

design for torquing hex nuts onto threaded rod of any length

Color-coded

ends and tips

for easy size
identification

6 sizes 1/4", 5/16", 3/8",

7/16", 1/2" and 9/16" sizes

Wrench-assist

feature for

added torque

Rare-earth

magnetic tip

holds nut in

place while

fastening

Heavy-Duty Nut Drivers

635-1/4 635-5/16

635-3/8

635-1/2 635-9/16

Cat. No. Nut Driver

Sizes

635-1/4 1/4" 4" (101.6 mm) Red 9" (228.6 mm) 0.30 lb (0.14 kg)
635-5/16 5/16" 4" (101.6 mm) Yellow 9" (228.6 mm) 0.30 lb (0.14 kg)
635-3/8 3/8" 4" (101.6 mm) Blue 9" (228.6 mm) 0.30 lb (0.14 kg)
635-7/16 7/16" 4" (101.6 mm) Brown 9-25/64" (238.5 mm) 0.40 lb (0.18 kg)
635-1/2 1/2" 4" (101.6 mm) Red 9-25/64" (238.5 mm) 0.50 lb (0.23 kg)
635-9/16 9/16" 4" (101.6 mm) Orange 9-25/64" (238.5 mm) 0.50 lb (0.23 kg)

Shaft
Length

Color
Code

Overall
Length

Weight

635-7/16

Cat. No. Set Contains Weight

635-6 6 Piece Heavy-Duty Nut Driver Set 2.5 lb (1.1 kg)

Cat. No. Description

635-1/4 1/4" Heavy-Duty Nut Driver
635-5/16 5/16" Heavy-Duty Nut Driver
635-3/8 3/8" Heavy-Duty Nut Driver
635-7/16 7/16" Heavy-Duty Nut Driver
635-1/2 1/2" Heavy-Duty Nut Driver
635-9/16 9/16" Heavy-Duty Nut Driver

Cat. No. Set Contains Weight

635-4 4 Piece Heavy-Duty Nut Driver Set 1.4 lb (0.6 kg)

Cat. No. Description

635-1/4 1/4" Heavy-Duty Nut Driver
635-5/16 5/16" Heavy-Duty Nut Driver
635-3/8 3/8" Heavy-Duty Nut Driver
635-7/16 7/16" Heavy-Duty Nut Driver

64

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

65

www.kleintools.com

Cushion-Grip Nut Drivers

Meets or exceeds applicable ASME / ANSI and MIL specifications

Internal flanges provide solid,

twist-resistant shaft anchor

Premium chrome-plated shaft

for smooth feel and corrosion resistance

Magnetic-Tip Hollow-Shaft Nut Drivers

Includes core Cushion-Grip Nut Driver features plus:

Exclusive hollow shaft* design with Rare Earth magnetic tip features

•

unobstructed pass-through, even on long bolts

Handle end is also

color coded for

easy identification

Tip-Ident® quickly

identifies nut

driver and size

Cushion-Grip handle

for greater torque and comfort

630-3/8M

Cat. No. Nut Driver

Sizes

610-1/4M 1/4" 1-1/2" (38.1 mm) Red 3-1/2" (88.9 mm) 0.10 lb (0.05 kg)
610-5/16M 5/16" 1-1/2" (38.1 mm) Yellow 3-1/2" (88.9 mm) 0.10 lb (0.05 kg)
610-3/8M 3/8" 1-1/2" (38.1 mm) Blue 3-1/2" (88.9 mm) 0.10 lb (0.05 kg)
630-3/16M 3/16" 3" (76.2 mm) Black 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-1/4M 1/4" 3" (76.2 mm) Red 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-5/16M 5/16" 3" (76.2 mm) Yellow 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-11/32M 11/32" 3" (76.2 mm) Green 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-3/8M 3/8" 3" (76.2 mm) Blue 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-7/16M 7/16" 3" (76.2 mm) Brown 7-5/16 (185.7 mm) 0.25 lb (0.11 kg)
630-1/2M 1/2" 3" (76.2 mm) Red 7-5/16 (185.7 mm) 0.25 lb (0.11 kg)
646-3/16M 3/16" 6" (152.4 mm) Black 9-3/4" (247.7 mm) 0.25 lb (0.11 kg)
646-1/4M 1/4" 6" (152.4 mm) Red 9-3/4" (247.7 mm) 0.25 lb (0.11 kg)
646-5/16M 5/16" 6" (152.4 mm) Yellow 9-3/4" (247.7 mm) 0.25 lb (0.11 kg)
646-11/32M 11/32" 6" (152.4 mm) Green 9-3/4" (247.7 mm) 0.25 lb (0.11 kg)
646-3/8M 3/8" 6" (152.4 mm) Blue 9-3/4" (247.7 mm) 0.30 lb (0.14 kg)
646-7/16M 7/16" 6" (152.4 mm) Brown 10-5/16" (261.9 mm) 0.35 lb (0.16 kg)
646-1/2M 1/2" 6" (152.4 mm) Red 10-5/16" (261.9 mm) 0.35 lb (0.16 kg)
618-1/4M 1/4" 18" (457.2 mm) Red 21-3/4" (552.5 mm) 0.50 lb (0.23 kg)
618-5/16M 5/16" 18" (457.2 mm) Yellow 21-3/4" (552.5 mm) 0.50 lb (0.23 kg)

*3/16" magnetic nut driver does not have a hollow shaft.

Shaft
Length

Color
Code

Overall
Length

Weight

Cat. No. Set Contains Weight

631M Magnetic Nut Driver Set 3" Shaft, 7 Pc 1.5 lb (0.7 kg)

Cat. No. Description

630-3/16M 3/16" Magnetic Tip Nut Driver 3" Shaft
630-1/4M 1/4" Magnetic Tip Nut Driver 3" Shaft
630-5/16M 5/16" Nut Driver with Hollow Shaft
630-11/32M 11/32" Magnetic Nut Driver 3" Shaft
630-3/8M 3/8" Magnetic Tip Nut Driver 3" Shaft
630-7/16M 7/16" Magnetic Tip Nut Driver 3" Shaft
630-1/2M 1/2" Magnetic Tip Nut Driver 3" Shank

Cat. No. Set Contains Weight

647M Magnetic Nut Driver Set 6" Shafts, 7 Pc 1.5 lb (0.7 kg)

Cat. No. Description

646-3/16M 3/16" Magnetic Tip Nut Driver 6" Shaft
646-1/4M 1/4" Magnetic Tip Nut Driver 6" Shaft
646-5/16M 5/16" Magnetic Nut Driver Cushion-Grip
646-11/32M 11/32" Magnetic Nut Driver 6" Shaft
646-3/8M 3/8" Magnetic Tip Nut Driver 6" Shaft
646-7/16M 7/16" Magnetic Tip Nut Driver 6" Shaft
646-1/2M 1/2" Magnetic Tip Nut Driver 6" Shaft

Cat. No. Set Contains Weight

630M Magnetic Nut Driver Set 3" Shank 2 Pc 0.40 lb (0.18 kg)

Cat. No. Description

630-1/4M 1/4" Magnetic Tip Nut Driver 3" Shaft
630-5/16M 5/16" Nut Driver with Hollow Shaft

Cat. No. Set Contains Weight

646M Nut Driver Set 6" Shafts, Magnetic 2 Pc 0.50 lb (0.23 kg)

Cat. No. Description

646-1/4M 1/4" Magnetic Tip Nut Driver 6" Shaft
646-5/16M 5/16" Magnetic Nut Driver Cushion-Grip

Cat. No. Set Contains Weight

610M Stubby Nut Driver Set 1-1/2" Shafts Magnetic 2 Pc 0.20 lb (0.09 kg)

Cat. No. Description

610-1/4M Magnetic Nut Driver 1-1/2" Hollow Shaft
610-5/16M 5/16" Magnetic Nut Driver 1-1/2" Shaft

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

www.kleintools.com

Cushion-Grip Nut Drivers

Hollow-Shaft Nut Drivers

Includes core Cushion-Grip Nut Driver features plus:

3" (76 mm) length for most long bolt and stud applications

•

6" (152 mm) length reaches into deep recesses and fits over extra-long bolts and studs

•

Exclusive hollow shaft* design with Rare Earth magnetic tip features unobstructed

•

pass-through, even on long bolts

Refer to the insulated section for insulated nut drivers.

Cat. No. Nut Driver

Sizes

610-1/4 1/4" 1-1/2" (38.1 mm) Red 3-1/2" (88.9 mm) 0.10 lb (0.05 kg)
610-5/16 5/16" 1-1/2" (38.1 mm) Yellow 3-1/2" (88.9 mm) 0.10 lb (0.05 kg)
630-3/16 3/16" 3" (76.2 mm) Black 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-1/4 1/4" 3" (76.2 mm) Red 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-5/16 5/16" 3" (76.2 mm) Yellow 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-11/32 11/32" 3" (76.2 mm) Green 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-3/8 3/8" 3" (76.2 mm) Blue 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-7/16 7/16" 3" (76.2 mm) Brown 7-5/16 (185.7 mm) 0.25 lb (0.11 kg)
630-1/2 1/2" 3" (76.2 mm) Red 7-5/16 (185.7 mm) 0.25 lb (0.11 kg)
630-9/16 9/16" 4" (101.6 mm) Orange 9-3/8" (238.1 mm) 0.35 lb (0.16 kg)
630-5/8 5/8" 4" (101.6 mm) Yellow 9-3/8" (238.1 mm) 0.35 lb (0.16 kg)
646-3/16 3/16" 6" (152.4 mm) Black 9-3/4" (247.7 mm) 0.25 lb (0.11 kg)
646-1/4 1/4" 6" (152.4 mm) Red 9-3/4" (247.7 mm) 0.25 lb (0.11 kg)
646-5/16 5/16" 6" (152.4 mm) Yellow 9-3/4" (247.7 mm) 0.25 lb (0.11 kg)
646-11/32 11/32" 6" (152.4 mm) Green 9-3/4" (247.7 mm) 0.25 lb (0.11 kg)
646-3/8 3/8" 6" (152.4 mm) Blue 9-3/4" (247.7 mm) 0.30 lb (0.14 kg)
646-7/16 7/16" 6" (152.4 mm) Brown 10-5/16" (261.9 mm) 0.35 lb (0.16 kg)
646-1/2 1/2" 6" (152.4 mm) Red 10-5/16" (261.9 mm) 0.35 lb (0.16 kg)
646-9/16 9/16" 6" (152.4 mm) Orange 11-3/8" (288.9 mm) 0.40 lb (0.18 kg)
646-5/8 5/8" 6" (152.4 mm) Yellow 11-3/8" (288.9 mm) 0.40 lb (0.18 kg)

Metric

630-4MM 4 mm 3" (76.2 mm) Red 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-4.5MM 4.5 mm 3" (76.2 mm) Yellow 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-5MM 5 mm 3" (76.2 mm) Black 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-6MM 6 mm 3" (76.2 mm) Red 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-7MM 7 mm 3" (76.2 mm) Orange 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-8MM 8 mm 3" (76.2 mm) Yellow 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-10MM 10 mm 3" (76.2 mm) Blue 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
630-11MM 11 mm 3" (76.2 mm) Brown 7-5/16 (185.7 mm) 0.20 lb (0.09 kg)

*3/16" magnetic nut driver does not have a hollow shaft.

Shaft
Length

Color
Code

Overall
Length

Weight

630-11MM

Cat. No. Set Contains Weight

631 Nut Driver Set 3" Shafts, 7 Pc 1.5 lb

Cat. No. Description

630-3/16 3/16" Hollow Shaft Nut Driver 3" Shaft
630-1/4 1/4" Nut Driver 3" Shaft Cushioned
630-5/16 5/16" Nut Driver Cushion-Grip 3" Shaft
630-11/32 11/32" Nut Driver 3" Hollow Shaft
630-3/8 3/8" Hollow Shaft Nut Driver 3" Shaft
630-7/16 7/16" Hollow Nut Driver 3" Cushioned
630-1/2 1/2" Nut Driver 3" Shaft Cushion-Grip

Cat. No. Set Contains Weight

647 Nut Driver Set 6" Shafts, 7 Pc 1.7 lb

Cat. No. Description

646-3/16 3/16" Nut Driver 6" Shaft
646-1/4 1/4" Hollow Shaft Nut Driver 6" Shaft
646-5/16 5/16" Hollow Shaft Nut Driver 6" Shaft
646-11/32 11/32" Nut Driver 6" Hollow Shaft
646-3/8 3/8" Hollow Shaft Nut Driver 6" Shaft
646-7/16 7/16" Nut Driver 6" Hollow Shaft
646-1/2 1/2" Nut Driver 6" Hollow Shaft

Cat. No. Set Contains Weight

65160 7 Piece Metric Nut Driver Set 3" Shafts 1.5 lb

Cat. No. Description

630-5MM 5 mm Cushion Grip Nut Driver 3" Shaft
630-55MM 5.5 mm Cushion-Grip Hollow-Shank Nut Driver
630-6MM 6 mm Cushion-Grip Nut Driver, 3" Hollow Shaft
630-7MM 7 mm Cushion Grip Nut Driver 3" Shaft
630-8MM 8 mm Cushion-Grip Nut Driver, 3" Hollow Shaft
630-9MM 9 mm Cushion-Grip Nut Driver, 3" Hollow Shaft
630-10MM 10 mm Cushion Grip Nut Driver 3" Shaft

Cat. No. Set Contains Weight

633 Nut Driver Set, 4 Pc 1.3 lb

Cat. No. Description

630-1/4 1/4" Nut Driver 3" Shaft Cushioned
630-5/16 5/16" Nut Driver Cushion-Grip 3" Shaft
630-3/8 3/8" Hollow Shaft Nut Driver 3" Shaft
630-9/16 9/16" Hollow Shaft Nut Driver 4" Shaft

Cat. No. Set Contains Weight

610 Stubby Nut Driver Set 1-1/2" Shafts 2 Pc 0.20 lb

Cat. No. Description

610-1/4 1/4" Stubby Nut Driver 1-1/2" Shaft
610-5/16 5/16" Stubby Nut Driver Cushion Grip

(0.7 kg)

(0.8 kg)

(0.7 kg)

(0.6 kg)

(0.09 kg)

66

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

67

www.kleintools.com

Cushion-Grip Nut Drivers

Coated Hollow-Shaft Nut Drivers

Includes core Cushion-Grip Nut Driver features plus:

Entire shaft plastic coated for circuit protection only. NOT INSULATED

•

Special plastic coating resists cutting, cracking and chipping

•

Thin coating permits use in confined areas

•

640-1/2

Cat. No. Nut Driver Sizes Shaft Length Color Code Overall Length Weight

640-3/16 3/16" 3" (76.2 mm) Black 6-3/4" (171.5 mm) 0.25 lb (0.11 kg)
640-1/4 1/4" 3" (76.2 mm) Red 6-3/4" (171.5 mm) 0.25 lb (0.11 kg)
640-5/16 5/16" 3" (76.2 mm) Yellow 6-3/4" (171.5 mm) 0.25 lb (0.11 kg)
640-3/8 3/8" 3" (76.2 mm) Blue 6-3/4" (171.5 mm) 0.25 lb (0.11 kg)
640-7/16 7/16" 3" (76.2 mm) Brown 7-5/16 (185.7 mm) 0.30 lb (0.14 kg)
640-1/2 1/2" 3" (76.2 mm) Red 7-5/16 (185.7 mm) 0.25 lb (0.11 kg)
640-9/16 9/16" 4" (101.6 mm) Orange 9-3/8" (238.1 mm) 0.40 lb (0.18 kg)
640-5/8 5/8" 4" (101.6 mm) Yellow 9-3/8" (238.1 mm) 0.40 lb (0.18 kg)

*3/16" magnetic nut driver does not have a hollow shaft.

WARNING: NOT insulated. Coating is

intended for protection of circuits only.

Cushion-Grip Multi-Nut Drivers

Heavy-Duty Multi-Nut Drivers

Multiple sizes in one convenient tool

•

Heavy-duty handle and shaft exceed the torque

•

performance of regular nut drivers
Wrench-assist feature for added torque

•

Cat. No. Description Nut Driver Sizes Shaft Length Overall Length Weight

32800 6-in-1 Multi-Nut Driver Heavy Duty 3/16", 1/4", 5/16", 3/8", 7/16", 9/16" 4" (101.6 mm) 9-1/2" (241.3 mm) 1.2 lb (0.5 kg)
32801 5-in-1 Multi-Nut Driver Heavy Duty 3/16", 1/4", 5/16", 3/8", 9/16" 4" (101.6 mm) 9-7/64" (231.4 mm) 1.0 lb (0.5 kg)

32800

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

www.kleintools.com

Plastic-Handle Nut Drivers

Meets or exceeds applicable ASME / ANSI and MIL specifications.

Chrome-plated shank

helps prevent corrosion

Internal flanges provide solid,

twist-resistant shaft anchor

Hollow-Shaft Nut Drivers

Includes core Plastic-Handle Nut Driver features plus:

Standard length works for most applications

•

Fits over long bolts and studs

•

Cat. Nos. SS8, SS10 and SS12 have smaller shaft

•

length for work in close quarters

Smooth Comfordome® handles

fit the palm of the hand comfortably

Handles are color-coded

for easy identification

S11

Cat. No. Nut Driver

Sizes

SS8 1/4" 1-1/2" (38.1 mm) Red 3-3/4" (95.3 mm) 0.15 lb (0.07 kg)
SS10 5/16" 1-1/2" (38.1 mm) Amber 3-3/4" (95.3 mm) 0.15 lb (0.07 kg)
SS12 3/8" 1-1/2" (38.1 mm) Blue 3-3/4" (95.3 mm) 0.15 lb (0.07 kg)
S5 5/32" 3" (76.2 mm) Amber 6-1/2" (165.1 mm) 0.10 lb (0.05 kg)
S6 3/16" 3" (76.2 mm) Black 6-5/8" (168.3 mm) 0.10 lb (0.05 kg)
S7 7/32" 3" (76.2 mm) Brown 6-5/8" (168.3 mm) 0.10 lb (0.05 kg)
S8 1/4" 3" (76.2 mm) Red 6-5/8" (168.3 mm) 0.15 lb (0.07 kg)
S9 9/32" 3" (76.2 mm) Orange 6-5/8" (168.3 mm) 0.15 lb (0.07 kg)
S10 5/16" 3" (76.2 mm) Amber 6-5/8" (168.3 mm) 0.15 lb (0.07 kg)
S11 11/32" 3" (76.2 mm) Green 6-5/8" (168.3 mm) 0.15 lb (0.07 kg)
S12 3/8" 3" (76.2 mm) Blue 6-5/8" (168.3 mm) 0.15 lb (0.07 kg)
S14 7/16" 3" (76.2 mm) Brown 7" (177.8 mm) 0.20 lb (0.09 kg)
S16 1/2" 3" (76.2 mm) Red 7" (177.8 mm) 0.20 lb (0.09 kg)
S18 9/16" 4" (101.6 mm) Red 8-1/2" (215.9 mm) 0.30 lb (0.14 kg)
S20 5/8" 4" (101.6 mm) Red 8-1/2" (215.9 mm) 0.30 lb (0.14 kg)
S66 3/16" 6" (152.4 mm) Black 9-5/8" (244.5 mm) 0.15 lb (0.07 kg)
S86 1/4" 6" (152.4 mm) Red 9-5/8" (244.5 mm) 0.15 lb (0.07 kg)
S106 5/16" 6" (152.4 mm) Amber 9-5/8" (244.5 mm) 0.15 lb (0.07 kg)
S116 11/32" 6" (152.4 mm) Green 9-5/8" (244.5 mm) 0.15 lb (0.07 kg)
S126 3/8" 6" (152.4 mm) Blue 9-5/8" (244.5 mm) 0.15 lb (0.07 kg)
S146 7/16" 6" (152.4 mm) Brown 10" (254.0 mm) 0.20 lb (0.09 kg)
S166 1/2" 6" (152.4 mm) Red 10" (254.0 mm) 0.20 lb (0.09 kg)

Shaft
Length

Handle
Color

Overall
Length

Weight

Cat. No. Set Contains Weight

K7 Nut Driver Set 3" Shanks, 7 Pc 1.2 lb

Cat. No. Description

S6 3/16" Hollow Shank Nut Driver 3" Shank
S8 1/4" Hollow Shank Nut Driver 3" Shank
S10 5/16" Nut Driver 3" Hollow Shaft
S11 11/32" Nut Driver, Plastic Grip 3" L
S12 3/8" Hollow Shaft Nut Driver 3" Shaft
S14 7/16" Hollow Shank Nut Driver 3" Shank
S16 1/2" Nut Driver 3" Hollow Shank

Cat. No. Set Contains Weight

89904 7 Piece Nut Driver Set 6" Shanks 1.2 lb

Cat. No. Description

S66 3/16" Individual Nut Driver 6" Shank
S86 1/4" Individual Nut Driver 6" Shank
S106 5/16" Individual Nut Driver 6" Shaft
S116 11/32" Individual Nut Driver 6" Shaft
S126 3/8" Individual Nut Driver 6" Shaft
S146 7/16" Individual Nut Driver 6" Shank
S166 1/2" Individual Nut Driver 6" Shank

Set Cat. No. K7 includes a vinyl pouch
which hangs up or rolls up

(0.5 kg)

(0.5 kg)

68

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

69

www.kleintools.com

Plastic Handle, Hollow-Shaft Nut Drivers

Super-Long Nut Drivers - 18" (457 mm) Shafts

Includes core Plastic-Handle Nut Driver features plus:

Ideal for reaching into walls and other hard-toreach places where added length is necessary

•

Cat. No. S1018 has a non-magnetic tip; Cat. Nos. S818M and S1018M have magnetic tips

•

Cat. No. Nut Driver Sizes Shaft Length Handle Color Overall Length Weight

S1018 5/16" 18" (457.2 mm) Amber 21-5/8" (549.27 mm) 0.25 lb (0.11 kg)
S818M 1/4" 18" (457.2 mm) Red 21-5/8" (549.3 mm) 0.25 lb (0.11 kg)
S1018M 5/16" 18" (457.2 mm) Amber 21-5/8" (549.3 mm) 0.25 lb (0.11 kg)

Metric Nut Drivers

Includes core Plastic-Handle Nut Driver features plus:

Standard length works for most applications

•

Fits over long bolts and studs

•

S1018

70209

Cat. No. Nut Driver Sizes Shaft Length Handle Color Overall Length Weight

70204 4 mm 3" (76.2 mm) Black 6-5/8" (168.3 mm) 0.10 lb (0.05 kg)
70245 4.5 mm 3" (76.2 mm) Black 6-5/8" (168.3 mm) 0.10 lb (0.05 kg)
70205 5 mm 3" (76.2 mm) Black 6-5/8" (168.3 mm) 0.15 lb (0.07 kg)
70255 5.5 mm 3" (76.2 mm) Black 6-5/8" (168.3 mm) 0.15 lb (0.07 kg)
70206 6 mm 3" (76.2 mm) Black 6-5/8" (168.3 mm) 0.15 lb (0.07 kg)
70207 7 mm 3" (76.2 mm) Black 6-5/8" (168.3 mm) 0.15 lb (0.07 kg)
70208 8 mm 3" (76.2 mm) Black 6-5/8" (168.3 mm) 0.15 lb (0.07 kg)
70209 9 mm 3" (76.2 mm) Black 6-5/8" (168.3 mm) 0.15 lb (0.07 kg)
70210 10 mm 3" (76.2 mm) Black 7" (177.8 mm) 0.15 lb (0.07 kg)
70211 11 mm 3" (76.2 mm) Black 7" (177.8 mm) 0.20 lb (0.09 kg)

Plastic Handle Nut Drivers

Magnetic Nut Drivers - Solid Shafts

Includes core Plastic-Handle Nut Driver features plus:

Powerful nut-holding magnet built into solid shaft

•

Cat. No. Set Contains Weight

70200 Metric Nut Driver Set 3" Shanks 10 Pc 1.9 lb

Cat. No. Description

70204 4 mm Metric Nut Driver 3" Shaft
70245 4.5 mm Metric Nut Driver 3" Shaft
70205 5 mm Metric Nut Driver 3" Shaft
70255 5.5 mm Metric Nut Driver 3" Shaft
70206 6 mm Metric Nut Driver 3" Shaft
70207 7 mm Metric Nut Driver 3" Shaft
70208 8 mm Metric Nut Driver 3" Shaft
70209 9 mm Metric Nut Driver 3" Shaft
70210 10 mm Metric Nut Driver 3" Shaft
70211 11 mm Metric Nut Driver 3" Shaft

Set includes white enamled metal stand with
identification labels for easy selection of tool

(0.8 kg)

S818M

Cat. No. Nut Driver Sizes Shaft Length Handle Color Overall Length Weight

S8M 1/4" 3" (76.2 mm) Red 6-5/8" (168.3 mm) 0.15 lb (0.07 kg)
S10M 5/16" 3" (76.2 mm) Amber 6-5/8" (168.3 mm) 0.15 lb (0.07 kg)
S86M 1/4" 6" (152.4 mm) Yellow 9-5/8" (244.5 mm) 0.15 lb (0.07 kg)
S106M 5/16" 6" (152.4 mm) Amber 9-5/8" (244.5 mm) 0.15 lb (0.07 kg)
S126M 3/8" 6" (152.4 mm) Blue 9-5/8" (244.5 mm) 0.15 lb (0.07 kg)

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

www.kleintools.com

Tapping Tools

Cushion-Grip Multi-Bit Tap Tool Driver

Increases job speed by combining taps and drivers in one tool

•

Six common tap sizes (6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20)

•

Each tap size rethreads to next larger size if threads are stripped

•

32518

REPLACEMENT TAP

Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Other Bits Shank Length Handle Color Overall Length Weight

32517 1/4", 5/16", 3/8" #1, #2 1/4" (6.4 mm), 3/16"

(4.8 mm)

Cushion-Grip 6-in-1 Tap Tool

Quickly forms new threads, re-forms burred threads, and cleans out plaster obstructions

•

Each tap size rethreads to next larger size if threads are stripped

•

Taps: 6-32, 8-32, 10-32,
10-24, 12-24, 1/4-20

4"
(101.6 mm)

Yellow/Black 7-3/4"

(196.9 mm)

0.50 lb
(0.23 kg)

32517

626

Cat. No. Tap Sizes Overall Length Weight

626 6-in-1 Tap 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20 7-3/4" (196.9 mm) 0.25 lb (0.11 kg)

6-in-1 Tapping Tool

Quickly forms new threads, re-forms burred threads, and cleans out plaster obstructions

•

Each tap size rethreads to next larger size if threads are stripped

•

Two high-carbon steel taps are secured in reversible holder

•

Cat. No. Tap Sizes Overall Length Weight

627-20 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20 7-5/8" (193.7 mm) 0.35 lb (0.16 kg)

Triple Taps

Quickly forms new threads, re-forms burred threads, and cleans out plaster obstructions

•

Each tap size rethreads to next larger size if threads are stripped

•

628-20 (10-24, 12-24, 1/4-20)
626-32 (6-32, 8-32, 10-32)

REPLACEMENT TAPS

627-20

628-20 (10-24, 12-24, 1/4-20)
626-32 (6-32, 8-32, 10-32)

REPLACEMENT TAPS

625-24

Cat. No. Tap Sizes Overall Length Weight

625-24 6-32, 8-32, 10-24 7-1/8" (181.0 mm) 0.20 lb (0.09 kg)
625-32 6-32, 8-32, 10-32 7-1/8" (181.0 mm) 0.20 lb (0.09 kg)

70

626-24 (6-32, 8-32, 10-24)
626-32 (6-32, 8-32, 10-32)

REPLACEMENT TAPS

4x

Stronger

Bit Retention

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

71

www.kleintools.com

Scratch Awls

Cushion-Grip Scratch Awl

Professional, heavy-duty, hard-pointed awl

•

Scribes metal, starts screw holes, performs a variety of piercing and punching jobs

•

Rigid, chrome-plated, heat-treated, tempered-steel shank has full reinforcing bolster

•

at handle for extra strength and impact reinforcement
Cat. No. 650DD has plated metal strike cap to protect handle from hammer blows

•

and is engineered, manufactured and tested for prying, chiseling and punching

Cat. No.

650 only

Cat. No. Shank Length Overall Length Weight

650 3-1/2" (88.9 mm) 7-7/8" (200.0 mm) 0.25 lb (0.11 kg)
650DD 3-1/2" (88.9 mm) 7-7/8" (200.0 mm) 0.30 lb (0.14 kg)

Steel Scratch Awl

One-piece forged-steel blade and bolstered shank

•

Heat-treated for long life

•

Well-balanced for top efficiency during use

•

Black finish for rust resistance

•

Cat. No. Overall Length Shank Length Weight

66385 7" (177.8 mm) 3-1/2" (88.9 mm) 0.30 lb (0.14 kg)

Conduit Reamers

650DD

66385

Conduit-Fitting and Reaming Screwdriver

Hooded-blade design keeps tip from slipping out of screws, especially when

•

tightening hard-to-reach conduit fittings. Thicker hood is designed for rugged use
Reams both the inside and outside of the conduit at the same time

•

5/16" (8 mm) screwdriver tip with 2-1/2" (64 mm) long shank

•

Longer Cushion-Grip handle provides comfort and more torque for reaming

•

Replaceable reaming blade is now held in place with a 1/6" (1.5 mm) set screw

•

Cat. No. Conduit Size Overall Length Weight

85191 1/2" (12.7 mm), 3/4" (19.1 mm), 1" (25.4 mm) 7-1/2" (190.5 mm) 0.50 lb (0.23 kg)

Conduit Reamer

Locks onto screwdrivers; reams and smooths thin-wall conduit

•

Reams ID and OD at the same time

•

Two set-screws for round- and square-shank screwdrivers

•

Fits up to 3/8" (10 mm) keystone-tip screwdrivers

•

NOT for use on power tools

•

Cat. No. Conduit Size Overall Length Weight

19352 1/2" (12.7 mm), 3/4" (19.1 mm), 1" (25.4 mm) 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)

Power Conduit Reamer

Ream conduit and install fittings in a fraction of the time

•

Designed to fit into power drill chucks and quick release adapters; impact ready

•

Includes precision engineered replaceable reaming blade

•

Replacement blades are available and the only approved blade for use in this tool

•

Replacement bits are available but any standard 1/4" hex bit will work

•

IMPACT RATED!

Precision engineered

replaceable reaming blade

85191

19353

CONDUIT REAMER
RPLACEMENT BLADE, 2pk

19352

19353

CONDUIT REAMER
RPLACEMENT BLADE, 2pk

1/4" hex

quick connect

85091

NOTE: Read and follow safety instructions in power tool owner’s manual.

Cat. No. Conduit Size Overall Length Weight

85091 1/2" (12.7 mm), 3/4" (19.1 mm), 1" (25.4 mm) 5-3/4" (146.1 mm) 0.33 lb (0.15 kg)

19353

CONDUIT REAMER
RPLACEMENT BLADE, 2pk

Klein Lasts Longer Before Cam Out

Klein

Competitor

Power Driver Bits

See page 310 for additional information on warnings.

www.kleintools.com

Screwdrivers, Nut Drivers and Accessories

Power Drivers

Manufactured in the U.S.A. to ensure proper fit in every application, each power

•

driver is precision machined, heat treated and finished to the gold standards Klein
Tools puts into every screwdriver blade. Proprietary processes create the longest
life power driver bit in the industry. Tight fitting tips reduce wear and deliver the
premium performance you expect from a Klein.

Precision machined for better fit, more torque and less wear

•

Custom heat treated for long life

•

100

80

60

40

20

0

PH3-6-2

C1-35-5PH2-1-15

Cat. No. Overall

Length

PH115 1" (25.4 mm) #1 Phillips 5 0.10 oz (2.8 g)
PH1355 3-1/2" (88.9 mm) #1 Phillips 5 0.50 oz (14.2 g)
PH162 6" (152.4 mm) #1 Phillips 2 0.9 oz (26 g)
PH2115 1" (25.4 mm) #2 Phillips 15 0.10 oz (2.8 g)
PH2355 3-1/2" (88.9 mm) #2 Phillips 5 0.50 oz (14.2 g)
PH262 6" (152.4 mm) #2 Phillips 2 0.9 oz (26 g)
PH315 1" (25.4 mm) #3 Phillips 5 0.10 oz (2.8 g)
PH3355 3-1/2" (88.9 mm) #3 Phillips 5 0.50 oz (14.2 g)
PH362 6" (152.4 mm) #3 Phillips 2 0.9 oz (26 g)
SL31615 1" (25.4 mm) 3/16" (4.8 mm) Slotted 5 0.10 oz (2.8 g)
SL316355 3-1/2" (88.9 mm) 3/16" (4.8 mm) Slotted 5 0.50 oz (14.2 g)
SL1415 1" (25.4 mm) 1/4" (6.4 mm) Slotted 5 0.10 oz (2.8 g)
SL14355 3-1/2" (88.9 mm) 1/4" (6.4 mm) Slotted 5 0.50 oz (14.2 g)

Power Driver Sets

Cat. No. Overall

Length

32234 3-1/2" (88.9 mm) #1 and #2 Phillips, #1 and

32235 6" (152.4 mm) Phillips #1 and #3 2 0.10 lb (0.05 kg)

Bit
Type

Bit
Type

#2 Square, 3/16" Slotted

Package
Quantity

Package
Quantity

Weight

Weight

5 0.10 lb (0.05 kg)

Power Nut Drivers

Available in several sizes, these hollow shaft magnetic nut drivers are designed

•

for long bolts, studs or threaded rod jobs.
Rare Earth magnetic head holds nuts and bolts to aid in hard to reach

•

installations.
The 5" and 10" models feature a wrench assist end, designed for high torque

•

loosening found in many jobs.
Power Nut Driver Set contains 1/4", 5/16" and 3/8" nut drivers (Cat. No. 32759)

•

PND7165

Cat. No. Overall Length Shaft Length Hollow Depth Nut Driver Sizes Weight

32759 6-5/16" (160.3 mm) 2" (50.8 mm) 1-7/8" (47.6 mm) 1/4", 5/16", 3/8" 0.10 lb (0.05 kg)
PND7165 6-5/16" (160.3 mm) 5" (127.0 mm) 3-11/16" (93.7 mm) 7/16" 0.16 lb (0.07 kg)
PND125 6-19/64" (159.9 mm) 5" (127.0 mm) 3-23/32" (94.5 mm) 1/2" 0.19 lb (0.09 kg)
PND9165 6+21/64 (160.7 mm) 5" (127.0 mm) 3-5/8" (92.1 mm) 9/16" 0.23 lb (0.10 kg)
PND71610 11-5/16" (287.3 mm) 10" (254.0 mm) 8-13/16" (223.8 mm) 7/16" 0.25 lb (0.11 kg)
PND1210 11-19/64" (286.9 mm) 10" (254.0 mm) 8-23/32" (221.5 mm) 1/2" 0.31 lb (0.14 kg)
PND91610 11-5/16" (287.3 mm) 10" (254.0 mm) 8-5/8" (219.1 mm) 9/16" 0.35 lb (0.16 kg)

Hollow magnetic* shafts for nut running

PND71610

32759

72

NOTE: Read and follow safety instructions in power tool owner's manual.

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.

73

www.kleintools.com

Power Driver Bits

Magnetic Hex Drivers

For driving sheet metal screws

•

Strong rare earth magnets for maximum holding

•

1/4" (6.4 mm) hex shank with quick release groove

•

Cat. No. Description Overall Length Weight

86600 1/4" Magnetic Hex Drivers, 3-pack 1-3/4" (44.5 mm) 0.12 lb (0.05 kg)
86601 5/16" Magnetic Hex Drivers, 3-pack 1-3/4" (44.5 mm) 0.14 lb (0.06 kg)
86602 3/8" Magnetic Hex Drivers, 3-pack 1-3/4" (44.5 mm) 0.16 lb (0.07 kg)
8660010 1/4" Magnetic Hex Drivers, 10-pack 1-3/4" (44.5 mm) 0.43 lb (0.20 kg)
8660110 5/16" Magnetic Hex Drivers, 10-pack 1-3/4" (44.5 mm) 0.49 lb (0.22 kg)
8660210 3/8" Magnetic Hex Drivers, 10-pack 1-3/4" (44.5 mm) 0.57 lb (0.26 kg)

Drill/Tap/Deburr Set

For aluminum, brass, copper, plastic, and up to 10 gauge metal

•

1/4" hex for easier application with quick connect

•

Set of six tap sizes plus two extra of the smallest taps

•

For use on up to 10 gauge metal

•

Made of high speed steel for added durability

•

86602

Cat. No. Tap Sizes Overall Length Weight

32217 6-32 (2), 8-32 (2), 10-24, 10-32, 12-24, 1/4-20 4" (101.6 mm) 1.5 lb (0.7 kg)

Cat. No. Tap Sizes Weight

32237 6-32 0.25 lb (0.11 kg)
32238 8-32 0.25 lb (0.11 kg)
32239 10-32 0.25 lb (0.11 kg)
32240 10-24 0.25 lb (0.11 kg)
32241 12-24 0.25 lb (0.11 kg)
32242 1/4-20 0.25 lb (0.11 kg)

32217

NOTE: Read and follow safety instructions in power tool owner's manual.