Klein Electronics Bantam-Batt, Bantam-UHF User Manual
Reference No: WTX19S12092237B002 Page 2 of 7
Material Safety Data Sheet
Section 1-Chemical Product and Company Identification
Product Name:
Model No.:
Ratings
Weight:
Manufacturer:
Address:
Emergency
Telephone:
Fax:
Email:
Li-ion Battery
Bantam-Batt
7.4V, 1500mAh, 11.1Wh
Approx.68.3g
Fujian HQT Communication Co., Ltd.
No.3, Yuanhong Road, Jiangnan Hi-tech Park, Licheng District, Quanzhou City,
Fujian province, China
0595-28025555
0595-28024444
chenqian1688@163.com
Section 2-Hazards Identification
Classification:
Appearance,
Color and odor
Invasion route: ACUTE: see Section 8 for exposure controls In the event that this battery has been
Health hazards:
Environment
hazards:
Burn & burst
danger:
Not dangerous with normal use. Do not dismantle、open or shred battery. The
hazards indicated are for a ruptured battery. Exposure to the ingredients contained
within or their ingredients products could be harmful.
Solid object with no odor, no color.
ruptured, the electrolyte solution contained within the battery would be corrosive
and can cause burns.
Skin contact: The leakage of the electrolyte may cause sore and stimulation on the
skin
Eye contact: The steam of the electrolyte may stimulate eyes. Especially,
substance that may cause inflammation of the eyes is contained
Inhalation: Inhalation of materials from a sealed battery is not an expected route of
exposure. Vapors or mists from a ruptured battery may cause respiratory irritation.
Ingestion: Swallowing is not anticipated due to the battery size. The ingestion of the
electrolyte causes tissue damage to throat
For the battery or cell, chemical materials are stored in a sealed metal or metal
laminated plastic case, which designed to withstand temperatures and pressures
encountered during normal use. As a result, during normal use, there is no physical
danger of ignition, explosion or leakage of hazardous materials. However, if
exposed to a fire, added mechanical shocks or decomposed, these improper
handlings would cause the leakage of electrolyte. Moreover, if heated strongly by
the surrounding fire, acrid gas may be emitted
Electrolyte leakage or battery container rupture may lead to the leakage of inner
component into the environment
Do not dispose of battery in fire--may explode. Do not short-circuit the battery—
may cause fire
Waltek Services (Shenzhen) Co., Ltd.
http://www.waltek.com.cn
Reference No: WTX19S12092237B002 Page 3 of 7
Chemical Composition
Molecular Formula
CAS No.
Weight（%）
Lithium Cobaltate
LiCoO2
12190-79-3
25-40
Aluminum
Ai
7429-90-5
10-40
Graphite
Natural graphite
C
7782-42-5
10-20
Artificial graphite
7740-44-0
Copper
Cu
7440-50-8
5-15
Organic electrolyte
N/A
N/A
10-20
Skin touch:
Remove all contaminated clothing and flush extraneous matter with soap and plenty
of water immediately for at least 15 minutes. Get medical aid.
Eyes touch:
In case of contact electrolyte with eyes, rinse immediately with plenty of water. Have
the victims remove contact lenses if he is wearing them before rinsing. Do not let the
victims rub his eyes. Get medical aid.
Inhalation:
Remove to fresh air. Give oxygen or artificial respiration if needed. Get medical aid.
Ingestion:
Swallowing is not anticipated in normal condition. If accidentally eat the product,
dilute by giving plenty of water and get medical aid. Assure that mucus does not
obstruct the airway. Do not give anything by mouth to an unconscious person
Danger
characteristic:
Non-flammable. The batteries can leak combustible electrolyte fumes in case of over
heat resulting from inappropriate use.
Hazardous
combustion
products:
Irritant gas may be emitted if burned or exposed to fire
Hazardous
combustion
products:
Irritant gas may be emitted if burned or exposed to fire
Fire-Fighting
method & media:
The staff must equipped with filter mask (full mask) or isolated breathing
apparatus. The staff must wear the clothes and gloves which can defend the fire and
the toxic gas. When the battery burns with other combustibles simultaneously, take
fire-extinguishing method which correspond to the combustibles. Extinguish a fire from
the windward as much as possible
Extinguishant:
Carbon dioxide, dry chemical, foam, etc
Personal
precautions
Attention! Corrosive material. Avoid contact with skin, eyes or clothing. Ensure
adequate ventilation. Use personal protective equipment as required. Evacuate
personnel to safe areas. Keep people away from and upwind of spill/leak.
Other
Information
Refer to protective measures listed in section 7 and 8.
Environmental
precautions
Refer to protective measures listed in Section 7 and 8. Prevent further leakage or
spillage if safe to do so. Should not be released into the environment. Do not allow to
Section 3 – Composition/information on Ingredient
Pure Admixture
Note: CAS number is Chemical Abstract Service Registry Number.
N/A=Not apply.
Section 4 – First Aid Measure
Section 5 – Fire Fighting measures
Section 6 – Accidental Release Measures
Waltek Services (Shenzhen) Co., Ltd.
http://www.waltek.com.cn
Loading...