Page 1
Page 2
2
Dear Customer,
Thank you and congratulations for choosing
Kleenmaid.
Your new appliance has been designed
and meticulously tested to ensure that it
meets all your culinary requirements, and
has been carefully manufactured using top
quality materials to give you years of reliable
performance.
For best results, carefully read the instructions
on how your new appliance is to be installed.
Correct installation will avoid delays and
unnecessary service call costs.
Once installation is complete, please read this
instruction manual carefully and get to know
the controls and the features of your new
Kleenmaid appliance. These simple instructions
will enable you to achieve excellent results from
the very first time you use it.
Again, congratulations and thank you for
choosing The Best You Can Own.
KLEENMAID
Page 3
Page 4
Page 5
3
SUMMARY
SAFETY .......................................................................................................................................................................... 4
P
RECAUTIONS BEFORE USING
....................................................................................................................................... 4
U
SING THE APPLIANCE
................................................................................................................................................. 4
P
RECAUTIONS NOT TO DAMAGE THE APPLIANCE
............................................................................................................ 5
P
RECAUTIONS IN CASE OF APPLIANCE FAILURE
............................................................................................................. 6
O
THER PRECAUTIONS
.................................................................................................................................................. 6
DESCRIPTION OF THE APPLIANCE ............................................................................................................................ 6
T
ECHNICAL CHARACTERISTIC
....................................................................................................................................... 6
USE OF THE APPLIANCE ............................................................................................................................................. 7
S
ENSITIVE TOUCH
........................................................................................................................................................ 7
D
ISPLAY
...................................................................................................................................................................... 7
STARTING-UP AND APPLIANCE MANAGEMENT ....................................................................................................... 8
B
EFORE THE FIRST USE
................................................................................................................................................ 8
“SLIDER”
ZONE AND TIMER SETTING ZONE
.................................................................................................................. 8
S
TARTING-UP
.............................................................................................................................................................. 8
R
ESIDUAL HEAT INDICATION
......................................................................................................................................... 8
E
XTENSION ZONE
......................................................................................................................................................... 8
T
IMER
.......................................................................................................................................................................... 9
A
UTOMATIC COOKING
................................................................................................................................................ 10
P
AUSE FUNCTION
....................................................................................................................................................... 10
R
ECALL FUNCTION
.................................................................................................................................................... 10
« K
EEP WARM » FUNCTION
......................................................................................................................................... 10
C
ONTROL PANEL LOCKING
......................................................................................................................................... 11
COOKING ADVICE ...................................................................................................................................................... 12
E
XAMPLES OF COOKING POWER SETTING
.................................................................................................................... 12
MAINTENANCE AND CLEANING................................................................................................................................ 12
WHAT TO DO IN CASE OF A PROBLEM ................................................................................................................... 13
ENVIRONMENT PRESERVATION .............................................................................................................................. 13
INSTALLATION INSTRUCTIONS ................................................................................................................................ 14
ELECTRICAL CONNECTION ...................................................................................................................................... 15
Page 6
4
SAFETY
Precautions before using
• Unpack all the materials.
• The installation and connection of the appliance must be done
by a qualified electrician. The manufacturer can not be
responsible for damage caused by building-in or connection
errors.
• The appliance must be installed in proper worktop.
• This domestic appliance is exclusively for the cooking of food,
to the exclusion of any other domestic, commercial or industrial
use.
• Remove all labels and self-adhesives from the ceramic glass.
• Do not change or alter the appliance.
• The cooking plate can not be used as a working surface.
• The appliance must be grounded and connected conforming to
local standards.
• Do not use an extension cable to connect it.
• The appliance can not be used above a dishwasher or a
tumble-dryer: steam may damage the electronic components.
• The appliance is not intended to be operated by means of
external timer or separate remote control system.
Using the appliance
• Switch the heating zones off after using.
• Keep an eye on cooking using grease or oils: they may quickly
ignite.
• Be careful not to burn yourself while or after using the
appliance.
• Make sure no cable of any fixed or moving appliance contacts
with the glass or the hot saucepan.
• Never cover the appliance with a cloth or a protection sheet.
This may become very hot and catch fire.
Page 7
5
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instructions concerning use of the
appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play
with the appliance.
• This appliance is not intended to be operated by means of an
external timer or separate remote-control system.
Precautions not to damage the appliance
• Unfinished pan bottoms or damaged saucepans (non
enamelled cast iron pots,) may damage the ceramic glass.
• Sand or other abrasive materials may damage ceramic glass.
• Avoid dropping objects, even small ones, on the vitroceramic
glass.
• Do not hit the edges of the glass with saucepans.
• Make sure that the ventilation of the appliance works according
to the manufacturer’s instructions.
• Do not put or leave empty saucepans on the vitroceramic hobs.
• Sugar, synthetic materials or aluminium foil must not contact the
heating zones. These may cause breaks or other alterations of
the vitroceramic glass by cooling: switch off the appliance and
take them immediately off the hot heating zone (be careful: do
not burn yourself).
• WARNING: Danger of fire: do not store items on the cooking
surface.
• Never place any hot saucepan over the control panel.
• If a drawer is situated under the installed appliance, make sure
the space between the content of the drawer and the underside
of the appliance is at least 2 cm. This is essential to ensure
correct ventilation.
• Never put any inflammable object (eg. sprays) into the drawer
situated under the vitroceramic hob. Cutlery drawers must be
resistant to heat.
Page 8
6
Precautions in case of appliance failure
• If a defect is noticed, switch off the appliance and turn off the
electrical supply.
• If the ceramic glass is cracked or fissured, you must disconnect
the appliance (at the switchboard) and contact the after sales
service.
• Repairing has to be done by specialists. Do not open the
appliance by yourself.
• WARNING: If the surface is cracked, switch off the appliance to
avoid the possibility of electric shock.
Other precautions
• Make sure that the cooking pan is always centred on the
cooking zone. The bottom of the pan should cover as much as
possible the cooking zone.
• Do not place aluminium or synthetic material containers on the
hob: they could melt on residual hot cooking zones.
• NEVER try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
DESCRIPTION OF THE APPLIANCE
Technical characteristic
Type Total Power Position of the heating zone Nominal Power Diameter
CCT6010 7000 W
Front left
Rear left
Rear right
Front right
1000 / 2200 W
1200 W
1500 / 2400 W
1200 W
135 / 210 mm
145 mm
170 x 265 mm
145 mm
CCT8010 7600 W
Front left
Rear left
Rear right
Front right
1000 / 2200 W
1200 W
1500 / 2400 W
1800 W
135 / 210 mm
145 mm
170 x 265 mm
180 mm
Page 9
7
Control panel
USE OF THE APPLIANCE
Sensitive touch
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger presses the key,
the corresponding command is activated. This activation is validated by a control light, a letter or a number in the
display and/or a “beep” sound.
For normal use press only one key at any time.
Display
Display Designation Function
0 Zero The heating zone is activated.
1…9 Power level Selection of the cooking level.
A Heat accelerator Automatic cooking.
E Error message Electronic failure.
H Residual heat The heating zone is hot.
L Locking Control panel locked
U Keep warm Maintain automatically at 70°C.
II Pause The hob is in pause.
Extension
zone
Pause/Recall
Power display
Control light cooking
zone
Control light timer
Timer display
Power selection zone “SLIDER” and timer
setting zone
Control light
Pause/Recall
Control light
On/Off
Control light
extension
On/Off key
Page 10
8
STARTING-UP AND APPLIANCE MANAGEMENT
Before the first use
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent. This may cause blue-
tinted colour on the glass surface.
“SLIDER” zone and timer setting zone
To select the power with the slider, slide your finger on the “SLIDER” zone. You can also directly access a particular
level if you put your finger directly on the chosen level.
Starting-up
• Start up / switch off the hob:
Action Control panel Display
To start Press key [ 0/I ] 4 x [ 0 ] are blinking
To stop Press key [ 0/I ] Nothing or [ H ]
• Start up / switch off a heating zone:
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
To set Slide on the “SLIDER“ [ 0 ] to [ 9 ] or
(adjust the power) to the right or to the left [ U ]
To stop Slide to [ 0 ] on “SLIDER“ [ 0 ] or [ H ]
or press on [ 0 ] [ 0 ] or [ H ]
If no action is made within 20 seconds the electronics returns to waiting position.
Residual heat indication
After switching off of a heating zone or the complete stop of the hob, the heating zones are still hot and indicate [ H ]
on the display.
The symbol [ H ] disappears when the heating zones may be touched safely.
As long as the residual heat indicators are on, don’t touch the heating zones and don’t put any heat sensitive object
on them. There are risks of burn and fire.
Extension zone
Action Control panel Display
select zone Press display [ 0 ] Control light is blinking
Select the power level Slide on the “SLIDER“ [ 0 ] to [ 9 ]
Switch off Touch key [
] Extension zone light is off
Switch on Touch key [ ] Extension zone light is on
“SLIDER” zone and timer setting
“SLIDER“ Direct access
Page 11
9
Timer
The timer can be used simultaneous with all 4 heating zones and with different time settings (from 0 to 99 minutes)
for each heating zone.
• Setting and modification of the cooking time :
Example for 16 minutes at power 7:
Action Control panel Display
Zone selection Press display [ 0 ] [ 0 ] and control light on
Select the power level Slide on the “SLIDER“ to [ 7 ] [ 7 ]
Select « Timer » Press display [ CL ] [ 00 ]
Set the units Slide on the “SLIDER“ to [ 6 ] [ 0 fixed ] [ 6 blinking ]
Validate the units Press display [ 06 ] [ 0 blinking ] [ 6 fixed ]
Set the tens Slide on the “SLIDER“ to [ 1 ] [ 1 blinking ] [ 6 fixed ]
Validate the tens Press display [ 16 ] [ 16 ]
The time is confirmed and the cooking starts.
• To stop the cooking time:
Example for 13 minutes at power 7:
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
Select « Timer » Press key [ 13 ] [ 13 ]
Deactivate the units Slide on the “SLIDER“ to [ 0 ] [ 1 fixed ] [ 0 blinking ]
Validate the units Press display [ 10 ] [ 1 blinking ] [ 0 fixed ]
Deactivate the tens Slide on the “SLIDER“ to [ 0 ] [ 0 blinking ] [ 0 fixed ]
Validate the tens Press display [ 00 ] [ 00 ]
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer display will blink [ 00 ] and a sound rings.
To stop the sound and the blinking, press the key [ 00 ].
• Egg timer function :
Example for 29 minutes :
Action Control panel Display
Activate the hob Press display [ 0/I ] Zone control lights are on
Select« Timer » Press display [ CL ] [ 00 ]
Set the units Slide on the “SLIDER“ to [ 9 ] [ 0 fixed ] [ 9 blinking ]
Validate the units Press display [ 09 ] [ 0 blinking ] [ 9 fixed ]
Set the tens Slide on the “SLIDER“ to [ 2 ] [ 2 blinking ] [ 9 fixed ]
Validate the tens Press display [ 29 ] [ 29 ]
After a few seconds the control light stops blinking.
As soon as the selected cooking time is finished the timer display will blink [ 00 ] and a sound will be heard.
To stop the sound and the blinking, press the display [ 00 ]. The hob switches off.
Page 12
10
Automatic cooking
All the cooking zones are equipped with an automatic “go and stop” cooking function. The cooking zone starts at full
power for a certain time, then reduces automatically its power to the pre-selected level.
• Start-up :
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
Full power setting Slide on the “SLIDER“ to [ 9 ] Pass from [ 0 ] to [ 9 ]
Automatic cooking Re-press on display “SLIDER“ [ 9 ] [ 9 ] is blinking with [ A ]
Select Power level Slide on the “SLIDER“ to [ 7 ] [ 9 ] pass to [ 8 ] [ 7 ]
(for example « 7 ») [ 7 ] is blinking with [ A ]
• Switching off the automatic cooking :
Action Control panel Display
Zone selection Press [ 7 ] from the zone [ 7 ] blinking with [ A ]
Power level selection Slide on the “SLIDER“ [ 1 ] to [ 9 ]
Pause function
This function stops the entire hob’s cooking activity and allows restarting with the same settings.
• Startup/stop the pause function :
Action Control panel Display
Engage pause Press [ II ] key Displays [ II ] in the
for 2 seconds Heating zone displays
Stop the pause Press [ II ] key for 2 seconds Pause control light is blinking
Press or Slide on the “SLIDER“ Pause control light is off
Recall Function
After switching off the hob (0/I), it is possible to recall the last settings.
- cooking stages of all cooking zones (power)
- minutes and seconds of programmed cooking zone-related timers
- switching condition of the concentric zone (small or big diameter)
- Heat up function
- Keep warm function
The recall procedure is following:
- Press the key [0/I]
- Then press the key [ II ] within 6 seconds
The previous settings are activated.
« Keep warm » Function
This function allows the cooktop to reach and maintain automatically a temperature of approximately 70°C.
This will avoid liquids overflowing and burning on the bottom of the pan.
The key is located between [ 0 ] and [ 1 ].
• To engage, to start the function « Keep warm » :
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] to [ 9 ] or [ H ]
To engage Press between [ 0 ] and [ 1 ] [ U ]
To stop Press on display [ U ] selected [ U ]
Slide on the “SLIDER“ [ 0 ] to [ 9 ] or [ H ]
This function can be started independently on all the heating zones.
When the pan is removed from the cooking zone, the "Keep warm" function remains active for approximately 10
minutes.
The maximum duration of “keeping warm” is 2 hours.
Page 13
11
Control panel locking
To avoid accidentally activating or interfering with a setting of cooking zones, in particular during cleaning, the control
panel can be locked (with exception of the On/Off key [ 0/I ]).
• Locking :
Action Control panel Display
Start press on key [ 0/I ] [ 0 ] or [ H ] on 4 displays
Hob locking press simultaneously [ ] and [ 0 ]
from the front right zone display No modification
re-press on display [ 0 ]
from the front right zone [ L ] on 4 displays
• Unlocking :
Action Control panel Display
Start press on key [ 0/I ] [ L ] on 4 displays
Within 5 seconds after start :
Unlocking the hob press simultaneously [ ] and
[ L ] from the front right zone display [ 0 ] or [ H ] on 4 displays
press on key [ ] No light on the displays
Page 14
12
COOKING ADVICE
Examples of cooking power setting
(The values below are indicative)
1 to 2 Melting
Reheating
Sauces, butter, chocolate, gelatine
Dishes prepared beforehand
2 to 3 Simmering
Defrosting
Rice, pudding, sugar syrup
Dried vegetables, fish, frozen products
3 to 4 Steam Vegetables, fish, meat
4 to 5 Water Steamed potatoes, soups, pasta,
fresh vegetables
6 to 7 Medium cooking
Simmering
Meat, eggs, sausages
Goulash, roulade, tripe
7 to 8 Cooking Potatoes, chips, waffles
9 Frying, roasting
Boiling water
Steaks, omelettes, fried dishes
Water
MAINTENANCE AND CLEANING
Switch-off the appliance before cleaning.
Do not clean the hob if the glass is too hot because there is a risk of burning.
• Remove light marks with a damp cloth with washing up liquid diluted in a little water. Then rinse with cold
water and dry the surface thoroughly.
• Highly corrosive or abrasive detergents and cleaning equipment are likely to cause scratches and must be
absolutely avoided.
• Do not ever use any steam-driven or pressure based appliance.
• Do not use any object that may scratch the ceramic glass.
• Ensure that the pan is dry and clean. Ensure that there are no grains of dust on your ceramic hob or on the
pan. Sliding rough saucepans will scratch the surface.
• Spillages of sugar, jam, jelly, etc. must be removed immediately. You will thus prevent the surface being
damaged.
Page 15
13
WHAT TO DO IN CASE OF A PROBLEM
The hob or the cooking zone doesn’t start-up :
• The connection to the network is wrong.
• The protection fuse has disconnected.
• The locking function is activated.
• The sensitive keys are covered with grease or water.
• An object is put on a key.
The control panel displays [ E ] :
• The electronic system is defective.
• Disconnect and reconnect the hob at the circuit breaker.
The control panel displays 4 x [ L ] :
• Refer to the chapter control panel locking page.
One or all cooking zone cut-off :
• The safety system is activated
• You forgot to turn-off the cooking zone for a long time.
• One or more sensitive keys are covered.
• The pan is empty and its bottom overheated.
• The hob also has an automatic reduction of power level to prevent overheating
The automatic cooking system doesn’t start-up :
• The cooking zone is still hot [ H ].
• The highest power level is set [ 9 ].
The control panel displays [ U ] :
• Refer to the chapter “Keep warm“.
The control panel displays [ II ]:
• Refer to the chapter “Pause “.
ENVIRONMENT PRESERVATION
• The materials of packing are ecological and recyclable.
• The electronic appliances are composed of recyclable, and sometimes harmful materials for the
environment, but necessary to the proper operation and the safety of the appliance.
• Don't throw your appliance into the household rubbish.
• Get in touch with the waste collection centre of your council that is
familiar with the recycling of household appliances.
Page 16
14
INSTALLATION INSTRUCTIONS
The installation must be perfomed by a qualified electrical contractor.
How to stick the gasket:
The gasket supplied with the hob prevents the intrusion of liquids into the cabinet below.
It’s installation has to be done carefully, in conformity with the following drawing.
Fitting - installing:
The cut out sizes are:
• Ensure that there is a distance of 50 mm between the hob and the wall or sides.
• The hobs are classified as “Y” class for heat protection. Ideally the hob should be installed with plenty of
space on either side. There may be a wall at the rear and tall units or a wall at one side. On the other side,
however, no unit or divider must stand higher than the hob.
• The piece of furniture or the support in which the hob is to be fitted, as well as the edges of furniture, the
laminate coatings and the glue used to fix them, must be able to resist temperatures of up to 100 °C.
• Do not install the hob at the top of a non ventilated oven or a dishwasher.
• Ensure under the bottom of the hob casing a space of 20 mm, to ensure a good air circulation of the
electronic device.
• If a drawer is placed under the hob, avoid putting into this drawer flammable objects (for example:
sprays) or non heat-resistant objects.
• Materials which are often used to make worktops expand on contact with water. To protect the cut out edge,
apply a coat of varnish or special sealant. Particular care must be taken when applying the adhesive joint
supplied with the hob to prevent any leakage into the supporting furniture. This gasket ensures a good seal
when used in conjunction with smooth work top surfaces.
• The safety gap between the hob and the cooker hood placed above must comply with the recommendations
of the hood manufacturer. In case of no instructions, a distance of 760 mm minimum should apply.
• The connection cord should not be subjected, to any mechanical constraint.
• The cooktop underside temperature exceeds 95 c, an underbench board is required to be installed to
prevent the underbench access.
• WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the
manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause accidents.
Cut size (mm) Glass size (mm)
Ref.
Width
Depth
Width
Depth
Thickness
w
d
W D
CCT6010 560
490
590 520 4
CCT8010 750
490
780 520 4
Stick the gasket (2) two millimeters from the
external edge of the glass, after removing the
protection tape (3).
Page 17
15
ELECTRICAL CONNECTION
• The installation of this appliance and the connection to the electrical network should be entrusted only to an
electrician perfectly to the fact of the normative regulations and which respects them scrupulously.
• Protection against the parts under tension must be ensured after the building-in.
• The data of connection necessary are on the stickers place on the hob casing near the connection box.
• The connection to the main must be made using an earthed plug or via an omnipolar circuit breaking device
with a contact opening of at least 3 mm.
• The electrical circuit must be separated from the network by adapted devices, for example: circuit breakers,
fuses or contactors.
• If the appliance is not fitted with an accessible plug, disconnecting means must be incorporated in the fixed
installation, in accordance with the installation regulations.
• The inlet hose must be positioned so that it does not touch any of the hot parts of the hob or oven.
Caution!
This appliance must only be connected to a network 230 V~ 50 Hz.
Always connect the earth wire.
Respect the connection diagram.
The connection box is located underneath at the back of the hob casing. To open the cover, use a medium
screwdriver. Place it in the slits and open the cover.
* calculated with the simultaneous factor following the standard EN 60 335-2-6
Connection of the hob
The ceramic hob can be connected in different ways:
Monophase 230V~1P+N
Biphase 400V~2P+N
Setting up the configurations:
For the various kinds of connection, use the brass bridges which are in the box next the terminal
Monophase 230V~1P+N
Put the bridge between terminal 1 and 2.
Attach the earth to the terminal “earth”, the neutral N to terminal 4, the Phase L to one of the terminals 1 or 2.
Biphase 400V~2P+N
Attach the earth to the terminal “earth”, the neutral N to terminal 4, the Phase L1 to the terminals 1 and the Phase L2
to the terminal 2.
Caution! Ensure that you:
- Correctly attach the wires and the bridges.
- Tighten the screws properly.
Frequent loosening and screwing of the screws on the connection box risks damaging the efficiency of the
tightness once screwed. It is therefore advisable to keep screwing and unscrewing to a minimum.
Ensure that the cables are correctly inserted and tightly screwed down.
We cannot be held responsible for any incident resulting from incorrect connection or which could arise
from the use of an appliance which has not been earthed or has been equipped with a faulty earth
connection
Mains Connection Cable diameter Cable Protection calibre
230V~1P+N 50Hz 1 Phase + N 3 x 2.5 mm²
H 05 VV - F
H 05 RR - F
25 A *
400V~2P+N 50Hz 2 Phases + N 4 x 1.5 mm²
H 05 VV - F
H 05 RR - F
16 A *
Page 18
Page 19
Warranty and Service
Domestic Warranty – Full three year warranty
In addition to all statutory rights which you, the Purchaser, have under relevant laws in respect of
this appliance, during the first three years of ownership as the original purchaser of this Kleenmaid
appliance, Compass Capital Services trading as Kleenmaid guarantee that any fault caused by
defective material or workmanship becoming apparent will be rectified free of charge with reference
to parts and labour, provided that all service is performed during normal working hours by Kleenmaid
or their designated Agents. Where the appliance is installed outside the normal servicing area of the
above, the Purchaser must pay for the cost of transporting the appliance to and from the Agent or the
Agent’s travel cost to and from the purchaser’s home.
Commercial Warranty – One year warranty
When this appliance is installed in a commercial application, in addition to all statutory rights which
you, the Purchaser, have under relevant laws in respect of this appliance, during the first one year of
ownership as the original purchaser of this Kleenmaid appliance, Compass Capital Services trading as
Kleenmaid guarantee that any fault caused by defective material or workmanship becoming apparent
will be rectified free of charge with reference to parts and labour, provided that all service is performed
during normal working hours by Kleenmaid or their designated Agents. Where the appliance is installed
outside the normal servicing area of the above, the Purchaser must pay for the cost of transporting the
appliance to and from the Agent or the Agent’s travel cost to and from the purchaser’s home.
What these warranties do not cover
Compass Capital Services trading as Kleenmaid is not responsible for any damage or malfunction
unless caused by a defect in material or workmanship. This includes but is not limited to abuse,
misuse, improper installation and transportation damage. Compass Capital Services trading as
Kleenmaid is not responsible for consequential damages from any malfunction.
This warranty does not cover wear or breakage of consumable items such as door seals , replacement
of light globes or glass breakage due to impact. In case of fractured glass do not use your appliance.
Purchaser’s responsibility
The Purchaser must make the appliance available for servicing and shall bear any costs incurred
for any de-installation and/or re-installation required to make the appliance available for servicing.
Compass Capital Services trading as Kleenmaid is not liable for any consequential damage incurred
during de-installation or re-installation.
Warranty registration and Proof of Purchase.
Please complete warranty details below and retain together with your proof of purchase document.
When requesting service under this warranty the Purchaser agrees that Proof of Purchase of their
Kleenmaid appliance will be necessary in order to make the warranty valid. Inability to provide Proof
of Purchase even though this warranty is in place will not bind Compass Capital Services trading as
Kleenmaid to repair the appliance at no charge under this warranty and will require the Purchaser to
pay for the service costs in full.
Model Number Date of purchase
For service assistance visit
www.kleenmaidhelp.com.au
Page 20
Compass Capital Services Pty Limited
trading as Kleenmaid
ABN 96138214525
Level 2, 204 Botany Road
Alexandria NSW 2015
E: help@kmaid.com.au
www.kleenmaid-appliances.com.au
Other products available in the
Kleenmaid range of appliances
|
Washing machines
|
Clothes dryers
|
Dishwashers
|
Ovens
|
Cooktops
|
Steam ovens
|
Microwave ovens
|
Built in espresso
coffee machines
|
Rangehoods
|
Freestanding ovens
Loading...