Kleenmaid BSC4530 Instructions For Use And Warranty Details

kitchen collection

Instructions for use and warranty details

Beverage Serving Cabinet

Model No.: BSC4530

Dear Customer,

Thank you and congratulations for choosing
Kleenmaid.

Your new appliance has been designed
and meticulously tested to ensure that it
meets all your culinary requirements, and
has been carefully manufactured using top
quality materials to give you years of reliable
performance.

For best results, carefully read the instructions
on how your new appliance is to be installed.
Correct installation will avoid delays and
unnecessary service call costs.

Once installation is complete, please read this
instruction manual carefully and get to know
the controls and the features of your new
Kleenmaid appliance. These simple instructions
will enable you to achieve excellent results from
the very first time you use it.

Again, congratulations and thank you for
choosing The Best You Can Own.

KLEENMAID

2

CONTENTS

Wine / Beverage Preservation Technology Warnings . . . . . . . . . . . . . . . . . . . 3

Installation of Beverage Serving Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

General Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installation Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Instructions For Left Hinged Door Installation . . . . . . . . . . . . . . . . . . . . . . . . 11

Adjustable Timber Shelving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Switching On Your Beverage Serving Cabinet .. . . . . . . . . . . . . . . . . . . . . . . 14

Temperature Settings.. . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . .16

Control Panel Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Auto Lighting Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .17

Replacing the LED Light Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Wine Serving Temperature Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Defrosting/Condensation/Hygrometry/Ventilation

Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 21

Replacing the Carbon Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 21

Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 22

Trouble Shooting Guide .

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . 24

Kleenmaid Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 22

. . . . . . . . . . . . . . . . . . . . .

20

5

Wine / Beverage Preservation Technology

3

Before using this beverage serving cabinet, please read and follow all safety rules and
operating instructions.

WARNING

Warranty applies to the Beverage Serving Cabinet only and not to the content of the
Beverage Serving Cabinet. The appliance is not covered by the warranty if it is being used
for any purpose other than that for which it was specifically designed. We cannot be held
responsible for any error in this manual, nor be responsible or liable for any spoilage or
damage to wines or any other contents incidental or consequential to possible defects of
the Beverage Serving Cabinet.

This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety. Cleaning and user maintenance should not be made by

children without supervision. Children should be supervised to ensure that they do not play
with the appliance.

This appliance has been designed exclusively for storing wine in a domestic setting. Every
other use is considered inappropriate. It should not be used in a commercial environment.

Only wine should be stored inside the appliance. Do not store food or other perishable
items inside this beverage serving cabinet.

Please don't put acidic items, flammable and explosive goods or similar into the

beverage serving cabinet.

This appliance is intended to be used in household and similar applications such as

– staff kitchen areas in shops, offices and other working environments
– farm houses and by clients in hotels, motels and other residential type environments
– bed and breakfast type residential environments

DANGER: Risk of child entrapment. Before you discard your old beverage
serving cabinet:

- Take off the doors

- Leave the shelves in place so that children may not easily climb inside

- When disposing of the appliance, do so only at an authorized waste disposal centre.

R600a Refrigerant WARNINGS:

4

For your safety observe the following recommendations.

 This appliance contains a small quantity of R600a refrigerant which is

environmentally friendly, but flammable. It does not damage the ozone layer, nor
does it increase the greenhouse effect.

 During transportation and installation, ensure that the tubing of the refrigerant

circuit is not damaged.

 Avoid using or manipulating sharp objects near the appliance.
 Leaking refrigerant can ignite and may damage the eyes.
 In the event any damage does occur, avoid exposure to open fires and any device

which creates a spark. Disconnect the appliance from the mains power.

 Thoroughly ventilate the room in which the appliance is located for several

minutes.

 Notify Customer Service for necessary action and advice.
 The area for installing the appliance must be at least 1 cubic metre per 8 grams of

refrigerant. The refrigerant quantity contained in this appliance is listed in the
Specifications table at the end of this document. It is also noted on the Rating Plate
of the appliance.

It is hazardous for anyone other than an Authorised Service Person to carry out
servicing or repairs to this appliance. In Queensland - the authorised Service Person

MUST hold a Gas Work Authorisation for hydrocarbon refrigerants to carry out
servicing or repairs where the gas system is being opened or charged.

WARNING: This appliance is only suitable for Domestic use and should not be used in a
commercial environment.
WARNING: Keep ventilation openings in the appliance enclosure or in the built-in
structure clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting
process. Only use methods recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING:

If the machine is not to be used for a lengthy period, please unplug the power
plug from the socket or switch off the power supply.
WARNING: This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety;
WARNING: Children should be supervised to ensure that they do not play with the
appliance.
WARNING: Do not use extension cords or ungrounded (two prong) adapters.
WARNING:If the supply cord is damaged, it must be replaced by the manufacturer,
it’s service agent or similarly qualified person in order to avoid hazard.

WARNING: Do not use electrical appliances inside the storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
WARNING: To avoid a hazard due to instability of the appliance, it must be fixed in
accordance with the instructions.

BEFORE LOADING & PLUGGING IN THE BEVERAGE SERVING CABINET

5

Allow 24 hours before switching on the beverage serving cabinet. During this time
we recommend that you leave the door open to clear any residual odours.

Important: BSC4530 is for integrated or built in use only.

Recommendations:

The location you have selected for your Beverage Serving Cabinet should:

- be unencumbered and well ventilated;

- be well away from any heat source and direct sunlight;

- not be too damp (laundry, bathroom etc.);

- have a standard and reliable electricity supply (standard AU earthed socket). Use of
a

power board or extension lead is not recommended.

- have a surge protector fitted to the electrical outlet.

The Beverage Serving Cabinet should be placed where the ambient temperature is within
the range stated in the Specifications table at the end of this manual. If the temperature is
above or below this range, it will affect the performance of the cabinet. Placing the cabinet
in very cold or hot temperature conditions may cause the cabinet’s temperature to
fluctuate, and not maintain the ideal temperature.

Grounding instructions:

The Beverage Serving Cabinet must be earthed in order for RCD safety switch to operate
correctly and is required by law. Earthing reduces the risk of electrical shock. The

Beverage Serving Cabinet is equipped with a power cord having an earthing wire and
plug. The Beverage Serving Cabinet plug must be plugged into a properly affixed and
earthed electrical outlet.

Note: In locations where there are frequent lightning storms, it is advisable to use surge
protectors.

Improper use of the earthed plug can result in the risk of electric shock. Consult a qualified
electrician or service person if the earthing instructions are not completely understood.
If the supply cord is damaged, it must be replaced by a qualified person in order to avoid
electrical hazard.

INSTALLING YOUR BEVERAGE SERVING CABINET

6

Unpack and remove all of the protection and adhesive strips from the packaging around
and inside the Beverage Serving Cabinet.

The Beverage Serving Cabinet must be positioned so that the plug is accessible.
Release the power cord. Move your Beverage Serving Cabinet to its final location. The
Beverage Serving Cabinet should be installed in a suitable place where the compressor
will not be subject to physical contact.

Leveling your Beverage Serving Cabinet: The base of the cabinet in which the Beverage
Serving Cabinet is installed must be level so the BSC4530 is level BEFORE loading wine.

GENERAL INSTRUCTIONS

1.Built in Beverage Serving Cabinets are front venting but are not designed to be fully

integrated behind a joinery door.

2.Please follow the installation diagram when installing built-in Beverage Serving Cabinets.

Observe the minimum installation dimensions, or it will affect the venting of cooler.

3.Built-in Beverage Serving Cabinets draw air from right of the ventilation frame and expel

through left of the ventilation frame.

4.Built in Beverage Serving Cabinets have a power switch located on the control panel.

5.The Beverage Serving Cabinet requires a standard 230 volt/10 amp power point.

6.The power cord is 2.0m in length and is fixed on the right side at the back when looking

from front of the cabinet.

7.As with many appliances of today, the Beverage Serving Cabinet has sensitive electronic
components which are susceptible to damage through lightning and electricity supply faults.
It is therefore advisable to use a power surge protector to avoid problems of this nature.

8.When a wood door is installed an air vent must be provided on the door for built-in
Beverage Serving Cabinets

In hot climate zones, an air vent or grid, with a minimum ventilation size of 200mm x 40mm
MUST be cut out at the rear top of the back partitioning or at the top of either side of the
partitioning, allowing cool fresh air full access to flow into the 30mm gap located at the rear
of the cabinet.
This air vent or grid must not be opened on the same side as other appliances such as ovens
or an area that is sealed and without access to fresh cool air. Failing to comply with the
above specifications could result in voiding the Warranty.

INSTALLATION DRAWINGS

7

Note: The appliance must be positioned so that the plug is accessible after installation.

DIMENSIONAL DRAWINGS:

As BSC4530 is a built-in model inside a cabinet, the cabinet should have good ventilation
space and no back panel, otherwise it will affect the functioning of the cabinet. (Installation
drawing as below)

The ventilation distance should
be at least 50 mm.

INSTALLATION DRAWINGS

8

OPENING ANGLE

9

Installation Instructions:

Fig. 1

Fig. 2

Fig. 3

10

1. Place the Beverage Serving Cabinet into the cabinet, then adjust the beverage serving
cabinet to make it steady. Open the door, take out the fixing plate (1 pcs), inner Hexagon
Screws ((2 pcs), inner Hexagon Screwdriver (1 pcs), and self-tapping screws (3 pcs) from
the accessory bag.

2. Use the inner hexagon screwdriver to fix the fixing plate on the lower left side of the
beverage serving cabinet with 2 inner Hexagon Screws (Fig.1).

3. Fix the fixing plate into the cabinet with 1pcs self-tapping screw (Fig.2).

4. Fix the other 2 pcs self-tapping screws into the cabinet through holes on the upper door
hinge and lower door hinge (1 screw for each hinge) (Fig.2).

INSTRUCTION FOR LEFT HINGED DOOR INSTALLATION

Hexagon wrench

Lower hinge

11

BSC4530 uses a replacement door kit for changing from the default right hand hinge to a left
hand hinge. The Hinge Reversing Kit contains a complete new door WITHOUT a handle,
which will be obtained from the original door. The original door should be stored safely in
case the hinge side is to be reversed again in the future. All other parts used for
reversing the door are already supplied with the appliance.

REMOVAL OF RIGHT HINGED DOOR

1. Unplug and place the beverage serving cabinet on an open work place.

2. Open the door to the maximum angle, undo the screws from upper hinge and lower

hinge using a hexagon wrench, and remove the door. (See FIG.A and FIG.B.)

3. Use a Phillips head screwdriver to undo the screws on the door handle and, using
these screws and screwdriver, attach the handle to the new left hinged door.

Upper hinge

FIG.A

INSTRUCTION FOR LEFT HINGED DOOR INSTALLATION

1. Take off the decorative plugs from the

left sides (picture FIG.A and FIG.B).

Decorative

plugs

FIG.A FIG.B

FIG.B

2. Align and install the upper and lower hinges to the hinge holes (picture FIG.C, FIG.D,

12

FIG.E, and FIG.F)

3. Install doo

FIG.C

FIG.E F

r to the hinges (picture FIG.G , FIG.H, FIG.I)

FIG.D

IG.F

FIG.G FIG.H FIG.I

4. Cover the right hinge holes with decorative nails (picture FIG.J , FIG.K), complete the

13

installation.

FIG.J

FIG.K

ADJUSTABLE WOODEN SHELVES

Adjusting & removing the shelves

For easy access to the storage content, you must pull the shelf approximately 1/3 of its
depth out of the rail compartment. These beverage cabinets, however, are designed with a
notch on each side of the shelf tracks to prevent bottles from falling.

When removing any of these shelves out of the rail compartment, tilt the shelf as per the
diagram and simply pull out, or push in the shelf until it sits on the support brackets
securely.

Sliding wooden shelf installation and removal instruction:

1. Shelf removal: According to the instruction drawing below, pull out the shelf to support
bracket ①, press two sides of sliding roller buckles and pull out the shelf following the
arrow mark ②

.

2. Shelf installation: According to the instruction drawing below, push in the shelf
alignment with two sides of sliding roller following the arrow mark③

.

SWITCHING ON YOUR BEVERAGE SERVING CABINET

14

Plug in and switch on the Beverage Serving Cabinet by pressing the power button for 3
seconds.

When you use the Beverage Serving Cabinet for the first time (or restart the Beverage
Serving Cabinet after having it switched off for an extended period), there will be a few
degrees variance between the temperature you have selected and the one indicated on
the LED readout. This is normal and after the Beverage Serving Cabinet has run for a few

hours it will stabilise at the set temperature

Important: If the unit is unplugged, power is lost, or turned off, wait 3 to 5 minutes
before restarting the unit. The Beverage Serving Cabinet will not start if you attempt to
restart before this time delay.

Operating Noises
To reach the desired temperature settings, the Beverage Serving Cabinets, like all
Beverage Serving Cabinets operating with compressors and fans, may produce the
following types of noises. These noises are normal and may occur as follows:

- Gurgling sound - caused by the refrigerant flowing through the appliance’s coils.

- Cracking/popping sounds - resulting from the contraction and expansion of the

refrigerant gas as it varies in temperature.

- Fan operating sound - to circulate the air within the Beverage Serving Cabinet.

An individual’s perception of noise is directly linked to the environment in which the

Beverage Serving Cabinet is located. This Beverage Serving Cabinets is in line with
international standards for such appliance.

LOADING YOUR BEVERAGE SERVING CABINET

You may load your wine bottles in single or double rows while taking note of the
following:

- If you do not have enough bottles to fill your Beverage Serving Cabinet, it is better to
distribute the load evenly throughout the Beverage Serving Cabinet.

- Remove or relocate adjustable wooden shelves to accommodate larger type of bottles or
increase the capacity of the cooler by stacking the bottles up when necessary. (See
removing shelves page 13)

- Keep small gaps between the walls and the bottles to allow air circulation. Like an

underground cellar air circulation is important to prevent mould and for a better
homogeneous temperature within the cabinet.

- To facilitate air circulation DO NOT over load your Beverage Serving Cabinet or stack

15

more than 1.5 rows of standard 0.75L bottles per shelf.

- Avoid obstructing the internal fans (located inside on the back panel of the Beverage

Serving Cabinet).

- To prevent the bottles from falling DO NOT slide the shelves outwards beyond the

fixed position.

- DO NOT pull out more than one loaded shelf at a time as this may cause the Beverage

Serving Cabinet to tilt forward.

- DO NOT cover the timber shelves with aluminum foil or other materials, as it will

obstruct air circulation.

- DO NOT move your Beverage Serving Cabinet while it is loaded with wines. This

might distort the body of the Beverage Serving Cabinet or cause back injury.

- Only wine should be stored in this appliance. Food or other perishable items MUST

NOT be stored inside this appliance.

TYPES OF REGULATION

Please note that depending on the loading and settings chosen it takes about 24 hours for
the Beverage Serving Cabinet temperature to stabilize.

During this time the LED in particular seems to move erratically. This is normal and this
process occurs whenever the setting is modified and/or whenever a large amount of bottles
are added to the cabinet.

Designed to store and mature all wines: red, white and sparkling, these Beverage Serving
Cabinets reproduce the ideal conditions for wine storage, at a constant recommended
temperature of 12ºC. They can also be set to provide ideal serving temperature for full

enjoyment of the wine’s qualities. Unless stated by the wine maker on the bottle,

temperatures of 7ºC for your champagne, 12ºC for whites and 18ºC for reds are
recommended. (Refer to “Wine Service Temperature” recommendation chart page 19)

TEMPERATURE SETTINGS

16

Important: The LED displays by default the actual internal air temperature.

In the event of a power failure the settings are stored so when power is restored operation
will resume with the previous settings.

It is important to understand that there is a difference between the air temperature inside
the Beverage Serving Cabinet and the actual temperature of the wine. You will need to
wait approximately 12 hours before noticing the effects of temperature adjustment due to
the critical mass within a full Beverage Serving Cabinet.

Once the temperature is set, it is strongly advised not to toy with it or adjust frequently.
The thermostat will maintain the temperature inside the Beverage Serving Cabinet within
a +/- 2.5ºC range, but the thermal inertia of the wine and the glass is such that within
this temperature range, the actual temperature of the wine will only fluctuate 0.5ºC to 1ºC.

Control Panel Instructions

 ① Cycle Button：

In standby mode: press and hold for 3 seconds, power is turned on, the machine starts
In the boot state: short press this button, LED lights on / off switch
In the boot state: press the button for 3 seconds, the power is off, the whole machine is
closed.

 ② Display Window:
Display the measured temperature inside the wine cooler

 ③ Cycle Button：

17

Each time the button is pressed the temperature inside will drop 1 ℃, until reduced to a
minimum, and then return to the highest temperature.

AUTO LIGHTNING FUNCTION

This product is designed with auto lightning function (as default feature) , i.e.:
Auto lighting on when door opened.
Auto lighting off when door closed.

1. To keep lighting on even when door closed:

A. Open the door (lighting on)

B. Manually touch the lighting icon on the control panel once, then the permanently

on lighting is effective.

C. Light will remain on when door is closed

2. To resume Auto lighting function:

A. Open the door (lighting on)

B. Manually switch off the light by touch the lighting icon on the control panel once, then

the permanently on lighting is canceled.

C. Auto lighting off when door closed (Auto lighting function resumed).

REPLACING THE LED LIGHT STRIP

18

1. Take out the LED light strip together with the light cover by unscrewing the screw in the middle.

screw

Light cover

2. Unplug the LED light wire from the connector

Connector

3. Take out the LED light strip from the light cover by unscrewing 2 screws on the strip

Screw

4.

Replace the LED light strip by following these steps in reverse order.

Screw

WINE SERVING TEMPERATURE CHART

19

All wines mature at the same temperature, which is a constant temperature set between
12ºC to 14ºC. The chart below is an indicative temperature chart to suggest the best
temperature for drinking purposes.

Champagne NV, Sparkling, Spumante 6ºC
Dry White Semillon, Sauvignon Blanc 8ºC
Champagne Vintage, 10ºC
Dry White Chardonnay 10ºC
Dry White Gewürztraminer, Riesling, Pinot grigio 10ºC
Sweet White Sauternes, Barsac, Montbazillac, Ice Wine, Late Harvest 10ºC
Beaujolais 13ºC
Sweet White Vintage: Sauternes… 14ºC
White Vintage Chardonnay 14ºC
Red Pinot Noir, 16ºC
Red Grenache, Syrah 16ºC
Red Vintage Pinot Noir 18ºC
Cabernet & Merlot: French, Australian, New Zealand, 20ºC

Chilean, Italian, Spanish, Californian, Argentinean…
Vintage Bordeaux … Room temperature not exceeding 20ºC

IMPORTANT INFORMATION ABOUT TEMPERATURE

Your Beverage Serving Cabinet has been designed to guarantee optimum conditions for
storing and/or serving your wines.

Fine wines require long and gentle developments and need specific conditions in which to
reach their full potential.

All wines mature at the same temperature, which is a constant temperature set between

12ºC to 14ºC. Only the temperature of “dégustation” (wine appreciation) varies according

to the type of wines (see “Wine Serving Temperature Chart” above). This being said and

as it is for natural coolers used by wine producers for long period of storage, it is not the
exact temperature that is important, but its consistency. As long as the temperature of your
Beverage Serving Cabinet is constant (between 12ºC to 14ºC) your wines will be stored in
perfect conditions.

Not all wines will improve over the years. Some should be consumed at an early stage (2
to 3 years) while others have tremendous ageing capability (50 and over). All wines have a
peak in maturity. Please check with your wine merchant to get the relevant information.

DEFROSTING/CONDENSATION/HYGROMETRY/VENTILATION

20

Your Beverage Serving Cabinet is designed with “Auto-cycle” defrost system. During
“Off-cycle” the refrigerated surfaces of the Beverage Serving Cabinet defrost

automatically. Defrost water from the Beverage Serving Cabinet storage compartment
drains automatically and part of it goes into a drainage container, which is located at the
back of the Beverage Serving Cabinet next to the compressor. The heat is transferred from
the compressor and evaporates any condensation that has collected in the pan. Part of the
remaining water is collected within the Beverage Serving Cabinet for humidity purposes.
This system enables the creation of the correct humidity level inside your Beverage
Serving Cabinet required by the natural cork to maintain a long lasting seal.

All units are equipped with a double glazed glass door that has a third internal
acrylic layer to minimize condensation on the glass door. The space between the glass door
panes is filled with an inert gas, Argon, to improve insulation and prevent condensation

The Beverage Serving Cabinet is not totally sealed; fresh air admission is permitted
through the drainpipe. Air is circulated through the cabinet by means of a fan/fans and the
hollow shelves.

Note: During the refrigerating cycle, heat is given off and disperses through the external
surfaces of the Beverage Serving Cabinet. Avoid touching the surfaces during those
cycles.

CARE AND CLEANING

21

Always disconnect the appliance from the mains electrical supply before cleaning or
performing maintenance.

• To remove/replace the timber shelves follow the instructions on page 13.

• Do not use abrasive products or detergents. After washing, rinse and dry thoroughly.

• The exterior of the appliance and the door seal should be cleaned using mild soapy

water and dried thoroughly.

• The interior cabinet should be cleaned using a solution of bicarbonate of soda and
lukewarm water.

• Clean the shelves separately by hand using mild soapy water. Do not put them in the
dishwasher.

• Ensure that the cloth is only moist when cleaning the control panel and electrical
parts, and all parts are completely dry before reconnecting the power.

• Once cleaning is complete, reconnect the mains electrical supply.

• If the appliance is not to be used for prolonged periods of time, unplug and clean the

appliance thoroughly. The door should be left slightly ajar to prevent the formation of
odours or condensation

Replacing the Carbon Filter:

One carbon filter has been included for keeping air fresh by absorbing odours inside
the wine cooler. It’s recommended the carbon filter be replaced every 3-6 months.

3-

How to replace a carbon

filter:

1. Open the door and take out all shelves.

2. Take out the Carbon

Filter Box by pulling firmly, replace the carbon filter
pad inside the box, then replace the carbon filter box by pushing the box
brackets into the two small mounting holes.

TROUBLE SHOOTING

22

Ensure that there is power to the electrical supply plug by connecting another electrical
appliance to it. Check fuse, if any. Make sure that the door is closed properly.

If your Beverage Serving Cabinet appears to be malfunctioning, unplug it and contact your
after sales service. Any intervention on the cold circuit should be performed by a
refrigeration technician who should carry out an inspection of the circuit sealing system.
Similarly, any intervention on the electrical circuit should be performed by a qualified
electrician.

Notes: Any intervention performed by an unauthorised technician may lead to the warranty

becoming void.

POWER FAILURES

In the event of a power interruption, all previous temperature settings are
automatically preserved and it will revert to a preset temperature setting.

Most power failures are corrected within a short period of time. Loss of power for an

hour or two will not affect the Beverage Serving Cabinet’s temperatures. To avoid
sudden change of temperature while the power is off, you should avoid opening the

door. For longer period of power failure, please take steps to protect your wine.

Regardless of the cause, if you notice either abnormal temperature or humidity
levels inside your Beverage Serving Cabinet, be reassured that only long
and frequent exposure to these abnormal conditions would have a detrimental
effect on your wine, and normal operation of the appliance will stabilise these conditions.

TROUBLE SHOOTING GUIDE

PROBLEM

POSSIBLE CAUSE

Beverage
Serving Cabinet
does not
operate.

Not plugged in.
The appliance is turned off.
The circuit breaker tripped or the fuse is broken.

Beverage
Serving Cabinet
is not cold
enough.

Check the temperature control setting.
External environment may require a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.

Turns on and off
frequently.

The room temperature is hotter than normal.
A large amount of contents has been added to the Beverage Serving
Cabinet.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.

The light does
not work.

Not plugged in.
The circuit breaker tripped or a blown fuse.
The bulb is out of order.
The light button is “OFF”.

Vibrations.

Check to assure that the Beverage Serving Cabinet is level.

The Beverage
Serving Cabinet
seems to make
too much noise.

The rattling noise may come from the flow of the refrigerant, which is
normal.
As each cycle ends, you may hear gurgling sounds caused by the flow of
refrigerant in your Beverage Serving Cabinet.
Contraction and expansion of the inside walls may cause popping and
crackling noises.
The Beverage Serving Cabinet is not level.

The door will
not close
properly.

The Beverage Serving Cabinet is not level.
The door was changed and not properly installed.
The gasket is faulty (magnet or rubber is spoiled).
The shelves are out of position.

23

Common problems may easily be solved, saving you the possible cost of a service call.
Please read the instruction manual carefully and consult this trouble shooting guide chart.

Specifications:

- Rated voltage/frequency : 230V+10%/-6% 50/60Hz

- Automatic defrost

- Humidity : 65% RH +/-10% RH

- Black outer and inner finish

- Internal light

- Triple layers glass door

- Ambient operating temperature range SN ~ T (10-43 C）

- Refrigerant quantity contained 18gm

- UV filter door glass

- Active carbon air filter

24

- Compressor operated: R600a

- Glass door panes space filled with Argon to improve insulation and prevent condensation

KLEENMAID WARRANTY

25

TERMS AND CONDITIONS

1. Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as Kleenmaid will provide parts and labour to you the
customer as set out herein.

2. Kleenmaid’s Products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.

3. The benefits given to you under this Kleenmaid Warranty are in addition to other rights and remedies to which you may be
entitled under the Australian Consumer Law in relation to the Product to which this Kleenmaid Warranty relates. Subject to
the conditions below, the Product is warranted by Kleenmaid and/or its agents to be free from defects in materials and
workmanship for the Warranty Period for normal Domestic Use.

4. Product Identification: -

a. Kleenmaid reserves the right to reject claims for any services or work where you cannot produce for verification the

serial number and a proof of purchase for the Product (including but not limited to the original invoice).

b. this Kleenmaid Warranty will be voided if the serial number for the Product cannot be verified. This is not intended to

exclude, restrict or modify any right or remedy to which you may otherwise be entitled under the consumer guarantee
provisions of the Australian Consumer Law.

c. in the event that a request for repair is made against this Kleenmaid Warranty where the serial number for the Product

cannot be verified or you cannot produce for verification a proof of purchase for the Product (including but not limited to
the original invoice), the repairer will not carry out any repairs on the Product and you will be charged a service call-out

5. What is covered by this Kleenmaid Warranty: -

6. What is not Covered by this Kleenmaid Warranty (excluded):-

7. This Kleenmaid Warranty ceases if: -

8. Neither Kleenmaid nor its representatives provide loan equipment under the terms of this Kleenmaid Warranty.

9. Any unauthorised access to the internal hardware of the Product will void this Kleenmaid Warranty.

fee.

a. the Product is covered for faulty workmanship or parts that have failed under normal Domestic Use.
b. Kleenmaid and/or its agents will determine by objective testing if there are any defects in the Product and/or faulty

workmanship.
c. this Kleenmaid Warranty is only applicable if repairs on Products are carried out within Mainland Australia.
d. this Kleenmaid Warranty: -

i. covers a Product purchased as new, manufactured for use in Mainland Australia;

ii. commences from the date of delivery of the Product;

iii. provides for the labour and replacement parts necessary to maintain the Product in good operating condition as

specified in this Kleenmaid Warranty, however, if repair is needed because of Product failure during normal Domestic
Use, Kleenmaid has the option to repair or replace the defective Product or part of the Product with a product or part
of like kind and quality. A replacement part may be new or reconditioned of like kind and quality and may cost less
than the original Product purchased and no charges or refunds will be made based on the replacement product or
part cost difference; and

iv. is only applicable when the Product is used and operated in accordance with the Manufacturer’s instructions.

a. any damage or failure to or of the Product or part of the Product:

i. due to the Product being inadequately serviced to manufacturer’s recommendations;

ii. resulting from environmental conditions including and not limited to dirt, dust, rodents, insects, rust, corrosion, salt

built-up, of or in any part of the Product;
iii. resulting from excessive use but fair wear and tear is excepted;
iv. resulting from poor installation including and not limited to positioning and externally fitted equipment such as

plumbing and drainage, cabling, antennae or due to incompatibility of connected equipment;

v. caused by overheating as a result of sitting or positioning of the Product, where there is no provision for adequate

ventilation or adequate protection from excessive dust;
vi. if the Product has been dismantled, repaired or serviced by any person other than someone authorised by Kleenmaid

or its agents or representatives;

vii. caused by power surges or spikes, including and not limited to, mains power and telecommunications

connections, or to other unspecified sources, incorrect power current, voltage fluctuation, amperage fluctuation, rust

or corrosion;

viii. if the Product is dropped, collision of the Product with another object, use for which the Product is not designed,

damage to the Product caused by your own negligence, accidental or deliberate misuse of the Product by you, theft,

abuse, vandalism, flood, fire, earthquake, electrical storms or any other act of God or any war related events; or
ix. due to the introduction of abnormal heat loads to the Product;

b. costs of attendance and testing where no fault or defect covered by the terms of this Kleenmaid Warranty is identified in

the Product;
c. initial setup and installation of the Product;
d. normal maintenance costs and costs incurred through the installation of items listed as requiring periodic replacement;
e. Products with removed or altered serial numbers;
f. broken or cracked glass other than transport damage to the initial point of delivery;
g. consumables such as but not limited to bulbs/globes, seals, filters, batteries and remote controls;
h. removal and reinstallation of an internal component not performed by an authorised Kleenmaid agent or representative

or authorised service centre;
i. cosmetic or structural items; or
j. any failures due to interference from or with other products and/or sources.

a. the Product ceases to carry the original manufacturer’s serial number or is sold at an auction;
b. the Product is rented; or
c. there is failure to pay monies owing on invoices as a result of non-warranty work being carried out at the request of the

end user as per point 16 below.

10. Repair Notice: Products presented for repair may be replaced by refurbished Products of the same type rather than being

26

repaired. Refurbished parts may be used to repair the Products.

11. Replacement items are “like for like” and is not “new for old” and does not indicate in any way that a faulty Product will be
replaced with a new part or unit. “Like for like” may either be a quality checked, refurbished or reconditioned unit of the
same or later batch of model/size/specifications

12. The cost of making a claim under this Kleenmaid Warranty is not covered by Kleenmaid, including any costs of transportation
or travel expenses between your home and your nearest authorised service agent.

13. Kleenmaid accepts no liability for items that are lost, damaged, or stolen as a result of freight, transport or storage. If you are
required to transport the Product to an authorised service centre, you must ensure that it is securely packed and insured.

14. On Public Holidays or other periods when regular business and wholesale operations are temporarily ceased, repairer
availability and warranty response times may extend beyond the standard response times due to the unavailability of
repairers and parts.

15. For any repair performed on a Product under this Kleenmaid Warranty where no fault can be found, or the item is deemed by
Kleenmaid or an authorised agent, to be not faulty under this Kleenmaid Warranty, or the repair or fault is not covered under
this Kleenmaid Warranty, a ‘No Fault Found’ fee is payable by you. Kleenmaid will advise you of this cost and seek your
agreement to pay such costs before commencing such repairs.

16. Any repairs or services required that are outside the terms and conditions of this Kleenmaid Warranty can be carried out at
your request at your cost (including where the Product has not been installed or set up correctly). Kleenmaid will always
advise you of this cost and seek your agreement to pay such costs before commencing such repairs. A credit card may be
required prior to the commencement of such services.

17. Extra charges will be payable by the customer should the Product not be readily accessible without special equipment, such
as but not limited to cranes and lifts or should the Product be installed in a position that service access is blocked and/or
repair work is not possible without uninstalling the Product to gain access.

18. You, the customer, may be entitled to purchase an extended warranty in respect of the Product. Any extended warranty will
not be issued by Kleenmaid but by a third party. Any extended warranty services will be provided directly by the third party as
principal and not as agent for Kleenmaid, under their extended warranty terms and conditions and not under this Kleenmaid
Warranty.

19. To make a claim under this Kleenmaid Warranty, please have your proof of purchase and the serial number of the Product
ready and call [phone] during business hours.

20. This Kleenmaid Warranty is given by:

Name: Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as Kleenmaid
Business address: Level 2, Suite 3, 204 Botany Rd, Alexandria NSW Australia 2015
Telephone: [phone]

21. Definitions:

a. Australian Consumer Law means the Competition and Consumer Act 2010 (Cth).
b. Domestic Use means use of the Product for personal, domestic or household purposes.
c. Kleenmaid means Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as Kleenmaid.
d. Mainland Australia means the following States and Territories of Australia: New South Wales, Victoria, South Australia,

Western Australia, Queensland, Tasmania, Northern Territory, Australian Capital Territory.

e. Product means the appliance sold by Kleenmaid to you as evidenced by the original purchase invoice.
f. Warranty Period means the period of 60 months for domestic use, 12 months for non-domestic use or such

alternative period as may be specified.

UPDATE NOTICE: This Kleenmaid Warranty is current as at 1 January 2019 but is subject to variation from time to time.

For the latest version of the Kleenmaid Warranty, please see our website
http://www.kleenmaid-appliances.com.au/support/your-kleenmaid-warranty or phone us on [phone].

Other products available in the
Kleenmaid range of appliances

|

Washing machines

|

Clothes dryers

|

Dishwashers

|

Ovens

|

Cooktops

|

Steam ovens

|

Microwave ovens

|

Built in espresso
coffee machines

|

Rangehoods

|

Freestanding ovens

|

Refrigerators & Freezers

|

Beverage Serving Cabinets

|

Water Dispensers

|

Vacuum Cleaners

Compass Capital Services Pty Limited
trading as Kleenmaid
ABN 96138214525

Level 2, 204 Botany Road Alexandria
NSW 2015

Register your Kleenmaid
Appliances Warranty
www.kleenmaidwarranty.com.au

equest a Warranty Service

R

www.kleenmaidwarranty.com.au

E: [e-mail]
www.kleenmaid.com.au

V2