Klark Teknik DI 10A Specifications
PRO DI ACTIVE DI 10A
BATTERY
Active DI Box with MIDAS Transformer,
Extended Dynamic Range and Phantom/Battery Operation
PAD – switch incrementally reduces the INPUT gain sensitivity to handle unusually loud
input signals. The PAD switch oers gain reduction settings of 0 dB (guitar), 20 dB (line)
or 40 dB (speaker).
INPUT – connections accept balanced and unbalanced signals over cables with ¼" TRS,
¼" TS or XLR plugs.
THRU – output sends out a copy of the INPUT signal and accepts connections from cables
with ¼" TRS or ¼" TS plugs.
POWER – switch turns the unit on and o.
ON – LED lights up to indicate the following conditions:
• batter y power active = LED blinks
• batter y power o = LED o
• phantom power ac tive = LED lights without blinking
How to insert the battery
BATTERY
BATTERY
LIFT / EARTH – switch can be used to connect or disconnect the ground link between
the INPUT and OUTPUT jacks in order to reduce hum or prevent group loops. The LIF T /
EARTH switch’s ability to reduce hum or prevent ground lo ops depends on the grounding
of connected devices. When the switch is in the LIFT position, the ground connec tion
between INPUT and OUTPUT is disconnected.
OUTPUT – XLR jack sends ou t a balanced version of the INPUT signal to your mixing board
or other processing device.
BATTERY COMPARTMENT – contains the 9 V battery use d to power the unit. Loosen the
screw to open t he compartment and replace the batter y.
NOTE: In the event that phantom power fails, the unit will automatic ally switch to
battery power.
Specications
Audio Connections
Input
Input Impedance > 250 kΩ
Thru
Output 1 x XLR, balan ced
Load Impedance > 600 Ω
Maximum Input level +10 / +30 / +50 dBu
System
Frequency Response 10 Hz to 90 kHz, ±3 d B
THD+N < 0.02 % @ 1 kHz, 0 dBu
Noise Level < -112 dBu
PAD Switch 0 / -20 / -40 dB
Power Supply
Phantom power 18 V DC to 48 V DC
Battery 9 V B lockcell 6LR61
Dimension / Weight
Dimensio ns (W x D x H) 118 x 120 x 64 mm (4.6 x 4.7 x 2.5")
Weight 0.56 kg (1.2 lbs)
1 x XLR, balan ced
1 x ¼" TS, unbalanced
1 x ¼" TS, unbalanced
LEGAL DISCLAIMER
MUSIC Tribe accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specications,
appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and COOLAUDIO are trademarks or registered trademarks of MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2018 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding MUSIC Tribe’s Limited Warranty, please see complete details online at music-group.com/warranty.
Loading...