KJM AMP-1/4 Installation And Operation Manual

AMP-1/4

Marine Grade Video Amp & Distributor

Installation and Operation Guide

ELECTRICIAL CONNECTIONS

CONNECTION EXAMPLE

ACCESSORIES

BNC-5

Five Meter Video Cable

COMB-10

10 Meter Video and Power Cable

COMB-25

1 Meter Video and Power Cable

KJM is dedicated to providing the finest in shipboard cameras and video equipment. Our high quality cameras and
accessories are built to withstand the harsh marine environment, and are designed by people with over three decades of
experience in the marine industry.. No matter what your marine surveillance requirements, KJM has a product to meet
your needs.

Please read the following pages before attempting installation to ensure complete understanding of the AMP-1/4 .

Precautions

 To reduce the risk of electric shock, do not remove disassemble as there are no user serviceable parts inside.
 This product must be installed by qualified service personnel or system installers.
 Do not operate beyond its specified temperature, humidity and power source ratings.
 Clean only with a dry cloth.

If you require additional support for the installation or use of this camera please contact us via email at
[e-mail]

 Attach the DC power plug to a +12 VDC source that can supply 0.5A.

(Center pin =+12VDC / Body Ground).

 Attach the female BNC input connector to your camera or DVR video output.

(1v P~P, 75 Ω, Composite video)

 Attach the output BNC connectors to your monitors or compatible Chart Plotter/MFD.
 If necessary using the proper tool, adjust the Brightness and Color controls on the AMP-1/4.
 KJM offers a line of video cables refer to accessory section.

If you require additional support for the installation or use of this camera please contact us via email at

[e-mail]

Page 2