Page 1
HD DVR Manual
Table of Contents
Warnings & Precautions 2
Includes 3
Introduction 4
Quick Setup Guide 4
Features 5
Setup/Remote Control Diagram 6
Menu & Settings 7
Playback 11
Menu Structure Tree 12
LED Chart 13
Specications 13
Frequently Asked Questions 14
Pictures 15
Warranty & Disclaimers 17
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
1
Page 2
Do not open/modify the device, as it may cause damage to the unit and void the Warranty.
For internal repairs, consult your dealer or an Authorized Service Center.
Do not use any accessories or power supplies other than what comes with the device,
otherwise it could void the warranty.
Protect from humidity. Do not put it in water and be careful to protect it from rain, sea
water, or high humidity environment. Do not operate the unit near a bath tub, shower, sink,
swimming pool, etc.
Protect from high temperatures
To avoid damage or mis-operation of the device, only use in temperature of 0 ~ +40°C(32 ~
104°F).
Do not bring the device suddenly from a hot to a cold place, or vice versa. This may cause
damage to the inside of the unit by creating condensation.
EU Environmental Protection
The symbol of crossed-out garbage shows that this product should not be treated as
household waste, as it falls into the category of electric /electronic equipment for recycling.
This electronic device should not be disposed of in regular trash. We strongly advise you to
contact your local authority for proper disposal of this product.
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
2
Page 3
Includes
• DVR Remote Control
• DVR Video Output Cable
• Memory Card
• CD with full User Manual
• Battery Pack & USB charge cable (not-pictured)
EITHER/OR
Compatible Memory Storage
For the device to function properly, the below memory card brands with a class 6 above are highly
recommended:
• Apacer
• Toshiba
• Sandisk
• Kingston
For 64GB cards, below memory card brands with class XCI or above are highly recommended:
• Toshiba
• Samsung EVO
Recording Duration Chart
Size Frame rate Quality 1GB 8GB 16GB 32GB 64GB
HD 30 fps Best 20 min 2.5 hours 5.5 hours 11.0 hours 21.5 hours
Better 28 min 3.5 hours 7.5 hours 15.0 hours 30.0 hours
Fair 46 min 6.0 hours 12.0 hours 24.5 hours 49.0 hours
D1 30 fps Best 39 min 5.0 hours 10.5 hours 21.0 hours 41.5 hours
Better 54 min 7.0 hours 14.5 hours 29.0 hours 57.5 hours
Fair 65 min 8.5 hours 17.0 hours 34.5 hours 69.0 hours
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
3
Page 4
Introduction
Thank you for purchasing your Xtreme Life HD hidden camera system, before you get started, allow us to
introduce you to some of the main components of your hidden camera. Xtreme Life™ HD is a hidden camera
with 720P video resolution, making your device a high denition video system. Xtreme Life™ HD was designed
to be a long life battery-operated hidden video recorder. To accomplish extended battery life, your system uses
a technology known as PIR(Passive Infrared). You’ll nd the PIR sensor located next to or near your camera.
The PIR sensor regulates power to the internal video recording components and is the triggering system that
initiates recording. When there is no activity in range of the PIR sensor, the camera and the DVR will be powered
down. When the sensor is triggered it will send a signal to turn on the camera and begin recording almost
instantly. The less activity the longer the system will maintain battery life.
All of our SleuthGear line of hidden cameras are designed and assembled in Nashville, TN USA, and
backed by our 1 year warranty. Visit our website to see the full line of SleuthGear hidden cameras at
www.mysleuthgear.com
We invite you to explore the Quick Setup Guide below to learn more about how to operate your Xtreme
Life™ HD hidden camera.
Quick Setup Guide
1. Take the unit from box and ensure you have received all included items(pg. 3).
2. Open the device to insert the memory card into the memory card slot and connect the battery, turning
it on after the connection is made.
3. To conrm the device is ready, connect the provided video cable from the unit to your TV video input
and create motion in front of the camera to see a live video feed and make a sample recording.
4. Your device is now ready to be placed in the area of desired surveillance.
5. Default recording setting is PIR detection. Once the power is turned on and the device recognizes the
memory card, the DVR will begin to record based on PIR detection(see note below).
**Special Note about PIR (Passive Infrared) Technology**
Each Xtreme Life™ DVR has a built in PIR sensor that detects levels of infrared radiation, the use of which makes
the battery life so long. Everything emits some level of radiation. The hotter an object is the more radiation
it emits. Changes in radiation levels are considered as motion by the DVR, which will then turn on and begin
to record. The PIR sensor requires very little power, so the DVR will be o even though the PIR sensor is still
detecting radiation. When the PIR detects a change in radiation, the DVR will turn on and begin to record. The
DVR takes approximately 3 seconds to turn on and start recording.
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
4
Page 5
Features
• HD Resolution 1280x720 for a True 720P Picture
• Indoor/Outdoor Hidden Video Surveillance Systems (select models)
• Now Using a Wide Angle Lens XL Captures More of your Scene than Ever Before
• Long Lasting Rechargeable Batteries using PIR Sensor Provide Up To 90 days of Operation (16 hours
continuous record)
• Night Vision - Hidden IR Lights Capture Video at Night (select models)
• Time/Date Stamped Files
• Digital CMOS camera with 720P Image Censor Provides Clear Captured Video
• Memory Card Recording for Portable, Transferable Storage - up to 64GB
• Easy HD Video Playback Now Capable of Playback on Windows, Apple, Android and Other Platforms
• Fast Start Up: From Trigger to Record in 2 Seconds, Nothing Captures Video Faster than Xtreme Life
• When Privacy Matters our Completely Concealed Cameras Hide in Plain Sight
• No Visible Wires
• 1 Year Manufacturer’s Warranty
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
5
Page 6
Setup
Remote Control Diagram
Icon Button Function Description(s)
Recording Manually puts the unit into
sleep mode from active.
Lock / unlock Remote control key lock /
unlock. Locks the buttons from
accidental operation.
Menu Enter or exit the Settings
Menu.
UP / DOWN Navigate: All sub-menus
except Date/Time
Change Settings: Date/Time
UP/DOWN
LEFT / RIGHT
Enter Conrm selection
Menu navigation and settings
changes – varies by menu.
Playback /
1X forward
Pause Pause video playing.
Stop Stop video playing.
Rewind 1X rewind.
Fast forward 1X / 2X / 4X / 8X fast forward
Fast rewind 1X / 2X / 4X / 8X fast rewind
LED Turn DVR LED light indicators
Not used
Not used
Not used
Enter the Playback Menu or
play video 1X forward.
on or o(see page 12 for chart)
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
6
Page 7
Menu & Sengs
P Press on the remote to get into the On-Screen-Display (OSD). From there you can modify the
system settings. There are only 4 categories in the OSD, they are: Recording, Triggering, Storage, and
Setting.
P
P Using to navigate between menus, press on your highlighted icon to enter
that section and access additional programming options.
P Refer to the Menu Structure Tree on page 12 for a full diagram of all OSD and programming options.
P To return to a previous screen, press at any time.
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
7
Page 8
1. Recording:
P Press to navigate.
P Press to change the setting.
P For an estimate of recording capacity by video
quality and memory card capacity, refer to the
chart on page 3.
2. Triggering:
P Press to navigate.
P Press to change the setting.
P PIR Auto off: The duration of time, in seconds,
that the DVR will countdown while continuing
to record after motion has been detected, which
triggers the recording process.
• Any further motion detected at any point
during that time frame will reset the
countdown.
• Once the time has elapsed without further motion, the device returns to sleep mode.
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
8
Page 9
P In the Schedule setting sub-menu, you can select all blocks (default pictured below) by column, or row
to change the Schedule Setting by week, hour or day by one click of the appropriate outer box(es). You
may also select individual hour blocks across various days.
P When scheduled to Continue mode, the DVR will continuously record during the set time block.
However, if a Continue block is preceded by a PIR or None without any trigger during the moment
of schedule transition, the DVR will remain in sleep mode until an event triggers it to wake, including
across any Continue blocks immediately following. Once awake, the DVR will continuously record until
the end of that block in which it is set to Continue, including across any subsequent Continue blocks
immediately following.
3. Storage:
P Press to navigate.
P Press to change the setting.
P Total Space, Total Time and Time Left will be
calculated automatically.
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
9
Page 10
4. Seng:
P Press to navigate.
P Press to change the setting.
P Buzzer Setup: Turns the conrmation sound on
or o.
P Status Display: Turns the live view on screen
display on or o. The OSD does not show on
recorded les.
P Audio: Option available on Law Enforcement and Export models only!
• Date & Time
P Press to navigate.
P Press to change the setting.
P Date & time format options: YYYY/MM/DD, MM/
DD/YYYY, DD/MM/YYYY
• Factory Default
P Factory Default will show all the default factory
setting values.
P Highlight “Yes” and press to load these
default settings.
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
10
Page 11
Playback
P When at the live image view, press to
enter the Playback Menu.
P Press to select the search type.
P Press to enter the selected search menu.
• File Search
P Select the le you would like to playback.
P Press to play the le
P Press return to the le list
P Press while in le list page to completely
exit the Playback Menu and return to the live
view.
• Date / Time Search
P Press to navigate.
P Press to change the value.
P Press to play the le
P Press at anytime to completely exit the
Playback Menu and return to the live view.
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
11
Page 12
Menu Structure Tree
MENU
Recording
Triggering
Storage
Frame Rate
Resolution
Quality
PIR auto off time
Schedule setting
Total Space
Total Time
Time Left
1, 2, 3, 4, 5, 10, 15, 30 fps
HD/D1
Best / Better / Fair
5, 10, 15, 20, 60 seconds
Setting
Mode
Format Storage
Buzzer Setup
Status Display
Audio
Date & Time
Firmware Status
Factory Default
Overwrite / Fullstop
On / Off
On / Off
On / Off
YYYY/MM/DD, MM/DD/YYYY,
DD/MM/YYYY
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
12
Page 13
LED Chart
*The LED indicators on board will follow below behavior:
Power Indicator
(Red LED)
Memory Card Indicator
(Green LED)
On
Power on
On
System ready and
memory card is working
normal
Blinking
N/A
Blinking
Fast Blinking (0.25s) :
Memory Card Full
Blinking
Slow Blinking (1s) :
Recording
O
Power o
O
Memory card is abnormal
or not working
Specifications
Operation Temperature 0ºC ~ 50ºC(32ºF ~ 122ºF)
Video Resolution HD (1280*720)
D1 (720*576 PAL / 720*480 NTSC)
Power Supply 5V DC
Video Compression H.264
Video Recording Schedule PIR Motion / None
Playback 1X / Fast Forward / Rewind
Recording Quality Best / Better / Fair
Recording Frame Rate 1, 2, 3, 4, 5, 10, 15 or 30 fps
Video format AVI
Recording Storage Micro SD card
Audio Recording Optional(Law Enforcement/Export only)
Audio Output Analog 1 channel output
Control IR remote control
Power Consumption (while recording) Nominal 2.0W
Standby Time with 10,000mAh battery Over 2000 hours (90 days)
PIR post recording 5, 10, 15, 20, or 60 seconds
Video Storage Mode Full-stop or Overwrite
PIR Motion Detection Supported
Low-lux Environment Supported
Field of View 140º
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
13
Page 14
Frequently Asked Questions
Q. How do I playback my video?
A. From the device, you can press the play button on the provided remote control to play the recorded les
back on your Television. You must have the output cable plugged into your Television, then select the proper
input on your TV to display video from the unit.
Q. What media player software should I use to playback the recorded les?
A. The recorded les are in the .AVI format, which is able to be played back on software such as Windows
Media Player and others often pre-installed on a personal computer. If you are having trouble with playback,
try downloadable software such as the free open-source player VLC (videolan.org). (If the les are put on a CD
or DVD, some DVD or Blu-ray players are able to directly playback the .AVI format – please consult your device’s
user manual for compatibility.)
Q. What happens if there are no video les on my Memory Card?
A. By default the unit is set to PIR detection. If you have had no activity, you will have no video les.
Q. I can’t nd my video les?
A. To directly access your les, you need to remove the memory card from your device and access it from a PC.
If the card is not instantly recognized, go to My Computer and search for devices listed as Removable Storage
or drives listed as Removable Disk.
Q. How do I reset my unit back to the way I got it?
A. Restoring the unit to its factory default settings can be done in the menu > Setting> Factory Default > Yes –
see page 10.
Q. Why does my device quickly turn o when trying to access the menu?
A. Any one of the following conditions will automatically put the device into sleep mode:
• No memory card is inserted
• Completely exiting the Menu
• Upon pressing the Menu to exit the Playback mode
• memory card is full and Storage Mode is set to Fullstop
• Recording Schedule is set to ‘None’
For units that have Night Vision (IRs); not all Xtreme Life HD units come with this option, please check
your receipt:
Q. Why are my Night Vision images not that bright?
A. Covert placement of the camera and IR sensor aect image quality in each individual product form. Move
the unit to dierent locations to test the video quality. You will experience pixilation with any night vision
camera. SleuthGear® strives to maintain a balance between creating a reliable hidden camera and recording in
extreme low light conditions.
While SleuthGear® makes a concerted eort to test Night Vision products in dierent low-light
situations, we cannot replicate every possible lighting environment at a customer’s location.
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
14
Page 15
Pictures
Wall Clock
Air Freshener
Smoke Detector
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
15
Page 16
Pictures
Mantel Clock
Plant
Teddy Bear
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
16
Page 17
Pictures
Electric Box
Rock
Bird Feeder
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
17
Page 18
Warranty & Disclaimers
Manufacturer warrants all Covert Video and Sleuth Gear Hidden Video Products (Product) assembled and sold by Manufacturer to be free of defects in material and
workmanship, subject to the following conditions. The duration of Manufacturer’s warranty with respect to the Product is limited to one (1) year from the date of sale to the
original consumer purchaser only for Products delivered within the fty (50) states of the United States, District of Columbia, or the possessions and territories of the United
States
No other express warranties are made with respect to any Product. All implied warranties, including warranties of merchantability and tness for a particular
purpose are limited to the warranty period set forth above. This warranty is not transferable and applies only to the original consumer purchaser of the Product.
Manufacturer will, as its sole obligation under this warranty, replace or repair, at its option, any Product that does not conform to this warranty. Under no circumstances will
the Manufacturer issue credit or give a refund for Product covered by this warranty. Furthermore, under no circumstances will Manufacturer be liable for any incidental or
consequential damages under this warranty or any implied warranties.
What is not covered:
This limited warranty does not cover Products that in Manufacturer’s judgment have damage resulting from any (i) deviation from Manufacturer’s operating instructions
as printed in Manufacturer’s catalog or on any packaging, labels or other literature provided with a Product, (ii) installation of a Product in a manner which is inconsistent
with Manufacturer’s written instructions, (iii) alteration, modication of or tampering with a Product, (iv) misuse, (v) neglect, (vi) abuse, (vii) accident, (viii) power surge,
static electricity or other electrical discharge, (ix) normal wear and tear, (x) commercial use, (xi) service by anyone other than a Manufacturer authorized repair facility, or
(xii) other improper application, installation or operation of the Product. Or, (xiii) have been purchased from inventory clearance or liquidation sales or other sales in which
Manufacturer expressly disclaims its warranty obligation pertaining to the Product.
How you (the Customer) can get service:
To obtain warranty service during the warranty period, you must return the defective Product with the original receipt to the original place of purchase. Contact them for
return instructions.
If warranty service is needed at any time during the warranty period, the purchaser will be required to furnish a sales receipt/proof of purchase indicating the date of
purchase, amount paid and place of purchase. Customers who fail to provide such proof of purchase will be charged for the repair of any Product.
How state law relates to the warranty:
Some states do not allow limitations on how long implied warranties last, or the exclusion or the limitation of incidental or consequential damages. So the above limitations
or exclusions may not apply to you. This warranty gives you specic legal rights. You may also have other rights that may vary from state to state.
NO PERSON IS AUTHORIZED BY MANUFACTURER TO MODIFY OR ADD TO THIS LIMITED WARRANTY.
For warranty information on Products delivered outside the United States please contact the original place of purchase.
DO NOT ATTEMPT TO RETURN PRODCUT TO ORIGINAL MANUFACTURER, AS THIS PRODUCT HAS BEEN MODIFIED AND IS NO LONGER SUBJECT TO ORIGINAL
MANUFACTURER’S WARRANTY. IN THE CASE OF A DEFECTIVE PRODUCT, CONTACT PLACE OF PURCHASE FOR RETURN PROCEDURE.
IT IS THE USER’S RESPONSIBILITY TO ENSURE THAT THIS EQUIPMENT IS USED IN ACCORDANCE WITH THE LAW(S) OF THE JURISDICTION IN WHICH THIS EQUIPMENT IS
UTILIZED.
THIS PRODUCT MAY BE SUBJECT TO THE JURISDICTION OF THE U.S. WIRE AND COMMUNICATIONS ACT (18 UNITED STATES CODE §§ 2510-2522) (HEREINAFTER REFERRED
TO AS “ACT”) REGARDING SURREPTITIOUS RECORDING DEVICES. THE USES OF SUCH PRODUCTS ARE REGULATED BY THE ACT. ADDITIONALLY, THE LAWS OF SOME STATES,
COUNTIES, CITIES OR LOCALITIES MAY PROHIBIT THE POSSESSION AND/OR USE OF THIS OR SIMILAR PRODUCTS. IT IS THE RESPONSIBILITY OF THE RETAIL BUYER AND/OR
FINAL CONSUMER (HEREINAFTER REFERRED AS “BUYER”) TO ASCERTAIN, UNDERSTAND, AND OBEY ANY AND ALL APPLICABLE LOCAL, STATE, AND FEDERAL LAWS REGARDING
POSSESSION AND USE OF THIS PRODUCT. BY PURCHASING THIS PRODUCT THE BUYER REPRESENTS THAT IT WILL INDEMNIFY THE MANUFACTURER AND/OR DISTRIBUTOR
AND HOLD THEM HARMLESS FOR ANY POSSESSION, USE AND/OR MISUSE THAT VIOLATE ANY FEDERAL, STATE OR LOCAL LAW OR REGULATION REGARDING AUDIO AND/
OR VIDEO DEVICES. BUYER AGREES TO CONSULT WITH AN ATTORNEY AT LAW REGARDING POSSESSION OR APPROPRIATE USE OF A COVERT DEVICE. NOTE THAT LAWS
AND REGULATIONS VARY FROM STATE TO STATE. IF BUYER EXPORTS THIS PRODUCT, THE BUYER WILL COMPLY WITH US EXPORT CONTROL LAWS AND ANY APPLICABLE
DEPARTMENT OF COMMERCE, STATE AND TREASURY REGULATIONS GOVERNING EXPORTS AND SALES TO PROHIBITED END USERS. DIVERSION OR RE-EXPORT CONTRARY
TO U.S. LAW IS PROHIBITED. BUYER SHALL COMPLY WITH ALL APPLICABLE FEDERAL, STATE, AND LOCAL LAWS AND REGULATIONS GOVERNING THE SALE OF THIS PRODUCT,
INCLUDING U.S. EXPORT CONTROL LAWS AND THE U.S. DEPARTMENT OF COMMERCE AND TREASURY REGULATIONS GOVERNING SALES TO PROHIBITED END USERS.
PART 15 LOW POWER: ANY CHANGES OR MODIFICATIONS TO THIS EQUIPMENT WITHOUT THE EXPESS AUTHORIZATION OF THE MANUFACTURER COULD VOID THE USER’S
AUTHORITY TO OPERATE THIS EQUIPMENT(RULE 15.21 OF THE FCC).
THIS EQUIPMENT HAS BEEN TESTED AND HAS BEEN FOUND TO BE IN COMPLIANCE WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC
RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTIONS AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT USES,
GENERATES AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATIONS.
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
18
Loading...