KJB SC1720 User Manual

720P Black Box
- HD Stealth Camcorder -
User Manual
Ver. 1.4.0
F40708000
Oct 24, 2014
- 2 -
Quick Start Guide................................................................................................................................... - 3 -
Diagram................................................................................................................................................... - 4 -
LED Indicator Status..............................................................................................................................- 5 -
Package Contains..................................................................................................................................- 6 -
Compatible Storage............................................................................................................................... - 7 -
IR Remote Controller............................................................................................................................. - 8 -
OSD Menu Structure Tree.................................................................................................................... - 9 -
Live View Screen.....................................................................................................................- 9 -
OSD Operation ......................................................................................................................- 11 -
Specification.......................................................................................................................................... - 16 -
- 3 -
Quick Start Guide
- 4 -
Diagram
Front
Rear
- 5 -
LED Indicator Status
Power Indicator
(Red LED)
On
Power on
Blinking
N/A
Off
Power off
Blinking
Fast Blinking (0.25s) : SD Card Full
SD Card Indicator
(Green LED)
On
System ready and Micro SD card is working normal
Blinking
Slow Blinking (1s) : Recording
Off
Micro SD card is abnormal or not working
Blinking
Fast Blinking (0.25s) : less than 20% (around) battery power left
Battery Indicator
(Yellow LED
Device: on)
On
Powering or Battery full of charge
Slow Blinking (1s) :
more than 20%
(around) battery power
Off
N/A
Battery Indicator
(Yellow LED
Device: off)
On
Powering
Blinking
N/A
Off
Battery full of charge
LED will light up when you turn the power switch to "ON", and then LED will follow below behavior.
How to Charge The Battery
Connect the provided power adapter to the unit. The "Yellow" LED will be on if the battery is charging. Please fully charge for 7~8 hours. (Please charge for 10 hours when you charge the battery for the first time.) With the optional cradle, the charging time is around 3 hours and the green LED will be on. The battery, after fully charged, can last for 6.5 hours at least under continuous recording. However, the battery power will be dramatically reduced when recording with IR LED. Under motion activation or power saving mode, Motion Activated Black Box can last for longer.
NOTE: Under low temperature conditions, the battery will have a shorter life than normal. NOTE: Please use the bundled power adapter only. Damage which is caused by other power adapter will be beyond warranty. NOTE: please re-charge the battery to full when receiving SC1720.
NOTE: For better performance it is recommended to charge the battery once every 3 weeks.
- 6 -
Package Contains
SC1720 Main Unit x 1
Remote Control x 1
Power Adapter x 1
3.7V 4800mA Li-polymer battery x 1
- 7 -
Compatible Storage
In order to work properly, below micro SD card brands and class 6 above are highly recommended.
* Apacer * Toshiba * Sandisk * Kingston
Micro SD card Class 6 or above is highly recommended, and will have smoother footage.
IMPORTANT:
1. Please format the micro SD card by black box first before recording.
2. Please put micro SD card inside first before starting to use the device.
3. Black box will turn off automatically under below situation.
No micro SD card put inside Press menu button in playback mode Out of OSD Card full when storage mode is fullstop. Schedule setting is “none”
- 8 -
IR Remote Controller
Icon Button
Function
Description(s) Recording
Start to recording manually or to power off the device.
Lock / unlock
Key lock / unlock
Menu
Exit to last page or enter into OSD setting.
UP / DOWN / LEFT / RIGHT
Enter
Confirm or enter to next page.
Playback / 1X forward
Go to playback list or move 1X forward.
Pause
Pause video playing.
Stop
Stop video playing.
Rewind
1X rewind.
Fast forward
1X / 2X / 4X / 8X fast forward
Fast rewind
1X / 2X / 4X / 8X fast rewind
LED
LED on / off
No defined
No defined
No defined
- 9 -
OSD Menu Structure Tree
MENU
Recording
Triggering
Storage
Setting
Frame Rate
Resolution
Quality
PIR auto off time
Schedule setting
Total Space
Total Time
Mode
Format Storage
1, 2, 3, 4, 5, 10, 15, 30 fps
HD/D1
Best / Better / Fair
5, 10, 15, 20, 60 seconds
Overwrite / Fullstop
Buzzer Setup
Status Display
Audio
Date & Time
Firmware Status
Factory Default
On / Off
On / Off
On / Off
YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY
Time Left
- 10 -
Live View Screen
Recording mode Storage mode power indicator
Recording resolution Frame rate
Storage information Keypad lock mode
Date/time stamp
- 11 -
OSD Operation
Press to change setting.
Press to select item.
Press "Menu" to get into the On-Screen-Display (OSD) page and modify the default setting(s). There are five categories in the OSD, they are: "Recording," "Triggering,"
"Storage," and "Setting".
In this page, please press "OK" to enter into any mode, which you would like to adjust. For example, in recording mode, using to select items and using to change setting.
After all settings been done, press to exit the setting mode.
1) Recording:
- 12 -
2) Triggering:
Press to change setting.
Press to select item.
In the "Schedule," you can select all / column / row to change the schedule setting by hour, day or week at one click
- 13 -
3) Storage:
Press to change setting.
Press to select item.
Total space and total time will be calculated automatically.
Press to change setting.
Press to select item.
Buzzer "off" will mute the remote control sound.
Status display "on" will show all the setting icons on the live-view screen.
MIC in "off" will mute the video recording.
Press to select item.
Press to change values
Date & time format: YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY
4) Setting:
Day & Time
- 14 -
Factory Default
Factory default will show all the default values in factory setting.
Press “Yes” to load default setting
Press to enter Playback Menu.
Press to select item.
Press OK to enter the selected item.
Select the file you would like to playback.
Press “OK” to play the file
Press back to file list
Press in file list page, and then DVR will turn off.
Press for page up and down
5) Playback mode:
**File Serch mode
- 15 -
** Date / Time Search
Press to select item.
Press to change values
Press “OK” to play the file
Press when file playback, and then DVR will turn off.
- 16 -
Specification
Dimension
120*120*30 mm Operation Temperature
0 ºC ~ + 50 ºC Video Resolution
HD (720*1280) / D1 (720*576 PAL / 720*480 NTSC) @30fps Power Supply
Li-polymer 4800 mAh or DC 12V Video Compression
H.264 Video Recording Schedule
PIR Motion / None Playback
Fast Forward / Rewind Recording Quality
Best / Better / Fair Recording Frame Rate
1, 2, 3, 4, 5, 10, 15 & 30 fps Video format
AVI Recording Storage
Micro SD card Antenna Gain
13dBm @ 6Mbps 10dBm @ 54Mbps Receiving Sensitivity
90dBm @ 6Mbps 72dBm @ 54Mbps Audio Recording
Yes (Optional) Audio Input
Condenser Microphone Audio Output
Analog 1 channel output Control
IR remote control Power Consumption (recording status)
nominal 2.0W Mission Standby Time
Around 700 hours (29 days +) PIR post recording
5, 10, 15, 20, 60 seconds Video Storage Mode
Full-stop or Overwrite PIR Motion Detection
Support Key Lock / Unlock
Support Angle of View
120º x 96º x 72º Low-lux Environment
Support
- 17 -
Thank you
Do not open/modify the device, as it may cause damage to the unit and void the Warranty. For internal repairs, consult your dealer or an Authorized Service Center.
Do not use any accessories other than what comes with the unit otherwise, it would void the warranty.
Protect from humidity.
Do not put it in water and be careful to protect it from
rain, sea water, or high humidity environment etc.
Protect from high temperatures
To avoid damage or mis-operation of the device, only use in temperature of 0 ~ +40°C.
Do not bring
the device suddenly from a hot to a cold place, or vice versa. This
may cause damaged to the inside of the unit by creating condensation.
EU Environmental Protection
The symbol of crossed-out garbage shows that this product should not be treated as household waste, and it falls into the category of electric /electronic equipment for recycling. This electronic device should not be disposed in a regular trash. We strongly advice you to contact related authorization before you dispose this product.
installation.
for purchasing our 720P Black Box. Please read this manual before
For customer support
, contact your dealer, keep your Invoice for further support.
Loading...