KJB PVTS3-U Setup Manual

16 1

Manufacturer’s Limited Warranty

Manufacturer warrants all Covert Video and Sleuth Gear Hidden Video Products (Product)
assembled and sold by Manufacturer to be free of defects in material and workmanship, subject to
the following conditions. The duration of Manufacturer's warranty with respect to the Product is
limited to one (1) year from the date of sale to the original consumer purchaser only for Products
delivered within the fifty (50) states of the United States, District of Columbia, or the possessions
and territories of the United States

No other express warranties are made with respect to any Product. All implied
warranties, including warranties of merchantability and fitness for a particular purpose
are limited to the warranty period set forth above. This warranty is not transferable and
applies only to the original consumer purchaser of the Product.

Manufacturer will, as its sole obli gation under this warranty, replace or repair, at its option,
any Product that does not conform to this warranty. Under no circumstances will the Manufacturer
issue credit or give a refund for Product covered by this warranty. Furthermore, under no circum­stances will Manufacturer be liable for any i ncidental or consequential damages under this war­ranty or any implied warranties.

What Is Not Covered. This limited warranty does not cover Products that in Manufac­turer’s judgment have damage resulting from any (i) deviation from Manufacturer's operating
instructions as printed i n Manufacturer's catalog or on any packaging, labels or other li terature
provided with a Product, (ii) installation of a Product in a manner which is inconsistent with Manu­facturer's written instructions, (iii) alteration, modification of or tempering with a Product, (iv)
misuse, (v) neglect, (vi) abuse, (vii) accident, (viii) power surge, static electricity or other electri­cal discharge, (ix) normal wear and tear, (x) commercial use, (xi) service by anyone other than a
Manufacturer authorized repair facility, or (xii) other improper application, installation or operation
of the Product. Or, (xiii) have been purchased from inventory clearance or liquidation sales or
other sales in which Manufacturer expressly disclaims its warranty obligation pertaining to the
Product.

How you (the Customer) can get service: To obtain warranty service during the war-
ranty period, you must return the defective Product with the original receipt to the original place
of purchase. Contact them for return instructions.

If warranty service is needed at any time during the warranty period, the purchaser will be
required to furnish a sales receipt/proof of purchase indicating the date of purchase, amount paid
and place of purchase. Customers who fail to provide such proof of purchase will be charged for
the repair of any Product.

How state law relates to the warranty: Some states do not allow limitations on how long
implied warranties l ast, or the exclusion or the limitation of incidental or consequential damages.
So the above limitations or exclusions may not apply to you. This warranty gives you specific legal
rights. You may also have other rights that may vary from state to state.

NO PERSON IS AUTHORIZED BY MANUFACTURER TO MODIFY OR ADD TO THIS
LIMITED WARRANTY.

For warranty information on Products delivered outside the United States please contact the origi-

nal place of purchase.

IT IS THE USER’S RESPONSIBILITY TO ENSURE THAT THIS EQUIPMENT IS USED IN ACCORDANCE WITH

THE LAW(S) OF THE JURISDICTION IN WHICH THIS EQUIPMENT IS UTILIZED.

DO NOT ATTEMPT TO RETURN PRODUCT TO ORIGINAL MANUFACTURER, AS THIS PRODUCT HAS BEEN

MODIFIED AND IS NO LONGER SUBJECT TO ORIGINAL MANUFACTURER’S WARRANTY. IN THE CASE OF

A DEFECTIVE PRODUCT, CONTACT PLACE OF PURCHASE FOR RETURN PROCEDURE.

THIS EQUIPMENT HAS BEEN TESTED AND HAS BEEN FOUND TO BE IN COMPLIANCE WITH THE LIMITS

FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DE-

SIGNED TO PROVIDE REASONABLE PROTECTIONS AGAINST HARMFUL INTERFERENCE IN A RESIDEN-

TIAL INSTALLATION. THIS EQUIPMENT USES, GENERATES AND CAN RADIATE RADIO FREQUENCY EN-

ERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH INSTRUCTIONS, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

Part 15 Low Power:

ANY CHANGES OR MODIFICATIONS TO THIS EQUIPMENT WITHOUT THE EXPRESS AUTHORIZATION OF

THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THIS EQUIPMENT. (RULE 15.21

OF THE FCC)

PVTS3-U

POCKET VIDEO

TRANSMITTER SET

USB RECEIVER WITH

REMOTE VIEW

15

Setup of the PVTS3-U

Plug the 12 volt battery pack into the female power jack leading from the Y con­nector Into the power (see diagram on page 14) Plug one of the male ends to the
power input on the PVTS3-U and the other male end to the camera being used.
This will power your transmitter and camera. The PVTS3-U will now be on.
Plug the video cable from your camera using the male to male adapter included
into the PVTS3-U. The PVTS3-U will now be transmitting a signal.

1 Insert the supplied CD into your computer & install the software “Secure Xpress
2”. Be sure to write down the Serial Number that is on the CD you will need this
for the installation. (Operational system Windows XP (sp2) or Windows Vista)

2

1

2

3

4

5

6

This will create a desk
top Icon

Frequently Asked Questions and Trouble Shooting

I do not get a picture what do I do?

Be sure that the Hidden Camera unit is plugged into a 110V power outlet.

See pairing instructions on page 14 and re “pair” the receiver with the transmitter.

My USB device is not working what can I do?

Be sure you have installed the ActiveX on the enclosed CD.

Try another USB port.

Reboot your PC, keep the USB receiver plugged in, then Open the program again.

I can not get remote monitoring to work what can I do?

Contact your ISP provider Have them help you set up your router to bypass the
fire wall. You will, if you have a fire wall set up, need to open 1 port to forward the
video so it can be viewed remotely.
See the manual on the CD it has more details on remote viewing.

How do I find my IP address?

Go to www.whatismyip.com

Why do my preferences not stay set?

Simply check the last recording and detection state in the preferences dialog box
to save the recording and detection state, see page 11

**Please note that plugging this unit into any electrical outlet other than a 110V
will cause the unit to not function and voids the warranty on this unit, Please use
correct adapters for your voltage.

314

Setup continued

After the setup wizard has finished you will get the following box, you will need to
put in the serial number that is located on the CD in Box 1 and then type in the
Secure code that shows up on the screen in Box 2, select Activate.

7

8

Box 1

Box 2

The next box will say Activation successful. Select OK, If you get the following
error select “Install Microsoft DirectX 9 and follow the prompts.

Pairing the Wireless USB Receiver with the Hidden Camera Transmitter

Your PVTS3-U has already been “paired”, in the event you need to re pair
the units follow this guide.

Make sure the unit is powered on. Press the (1) Pairing Button on the
PVTS3-U unit, see diagram below to locate the button the (2) LED will be­gin blinking fast on the unit, Immediately press the button on the (3)
receiver as indicated in the diagram below. Your receiver and transmitter
are now paired and should work properly.

Includes:
PVTS3-U
USB receiver
CD
Manual

2

1

Video In / Power

3