Solid orange LED P2P Connected
Pause Recording / Stand-by
Recording an d playback video（via smartphone
Video recordi ng 150-210min
Audio recording 900min
Misc.
Power
Physical
Built-in Camera Module
Video Spec.
Audio Spec.
Storage & I/O
Wi-Fi Spec.
1. Names and Parts
2. Package Content
6. Operaon4. Charge the Baery
1
4
3
2
5
6
10
7
9
8
1. Lens
2. Reset Buon
3. Wi-Fi On / Off
4. Recording Mode
Video / Audio
5. Power On / Off
6. LED Display On / Off /
Format Buon
※ Microphone is not available for USA market.
7. Red LED - Recording
8. Orange LED - P2P
9. Blue LED - Power and
Charging
10. Default Buon
11. Microphone
12. Memory Card Slot
13. USB Port
11
12
13
PV-Cam Viewer
for Wi-Fi Cam
App Store/Play Store
Installation Quick Guide
LawMate, innovation never stops
LawMate, innovation never stops
®
PV-NB10W
Notebook Digital Video Recorder
Quick Guide
®
V1.0
Main Device User Manual
Lock
Adapter
Memory Card
USB CableNotebook Pages
3. Add Pages to Notebook
3.1 Open the notebook to the angle as shown in illustraon
(A).
3.2 Add the pages from the gap of the noteook binder as
shown in illustraon (B).
3.3 Tear down the used pages if you want to remove them.
(A) (B)
2 1
4GB
Connect the micro USB end of the cable to and connect
13
the other end to an USB power source, or plug it to a power
bank of your own choice. The power bank then works as an
extra baery. The three blue LED will be on and running during
charging. When charging is complete, the three blue LED will
all be on.
5. LED Indicators
3 blue LED all on LED display On/Fully Charged
Blinking blue LED Device Need Charge
Running blue LED Charging
Solid red LED Recording
Blinking red LED
Blinking orange LED Searching P2P
※ Warranty will be void if the serial number scker is tampered.
Mode / Memory Card Full
3 4
6.1 LED Display
To check the baery capacity and device status, turn on
the LED display by pressing .
6
Press again to turn it off.
6
6.2 Power On
To power on the device, insert the memory card and
switch to On. The red LED will blink in stand-by mode.
5
6.3 Recording Mode
6.3.1 Video Recording
Switch to Video and the red LED will be solid on.
6.3.2 Audio Recording
Switch to Audio and the red LED will be solid on.
4
4
6.4 Stop Recording
To stop recording and go back to stand-by mode, switch
4
to the middle and the red LED will flicker.
6.5 Wi-Fi Funcons
6.5.1 To build Wi-Fi connecon, switch to On and
3
follow the instrucons in PV Cam Viewer Quick
Guide. The orange LED will be solid on when
connected to Wi-Fi.
6.5.2 For more Wi-Fi funcon, please refer to the PV Cam
Viewer for Wi-Fi Cam Quick Guide.
6.6 Power Off
To power off the device, switch to Off then press
5
6
to turn off the LED display.
6.7 Reset
If the device is working abnormally, press to reset.
6.8 Default
6.8.1 To restore Wi-Fi password and SSID, turn on the
device, press and hold for at least 3 seconds and
10
then let go. The red and orange LED will turn on and
then off.
6.8.2 To restore all default sengs, turn on the device,
press and hold for at least 10 seconds and then
10
let go. The red and orange LED will turn on and then
off.
7. Format Memory Card
7.1 Format on Device
7.1.1 Press and hold , and turn on the device.
7.1.2 You will see blue LED all on and red LED flickering.
7.1.3 The device will power off when format is complete.
6
7.2 Format on PV Cam Viewer APP
7.2.1 Go to program seng on PV Cam Viewer App
7.2.2 Press Format Card and confirm command.
※
It is important to format the card when using it for the
first me.
8. Date and Time Seng
8.1 On PC (Windows System)
8.1.1 Right-click on Windows desktop. Choose Notepad to
create a *.txt file. Then double-click the text file.
5
8.1.2 Suppose current me is April 11, 2018 15:00. Enter
2
date and me informaon as 2018.04.11 15:00:00
Note: A space must be present in between date and
hour, me must be 24-hour format.
8.1.3 Save file name as seme.txt to the root directory of
the memory card.
8.1.4 Insert the memory card to the slot then power on
the device. The seng is now completed.
Note: When the date and me informaon is successfully
set to the deivce, the seme.txt file should not be
visible when you connect the device to the
computer again.
8.2 On PV Cam Viewer APP
Please refer to the “Synchronize the Time” steps on the
PV Cam Viewer for Wi-Fi Cam Quick Guide.
10. Specificaon
Built-in Image Sensor 1/3" progressive CMOS sensor
Sensor Resoluon 2304x1536
Sensor Sensi vity 3.3 Lux @ F 2.0
Lens F/No. F 3.2
Focal Length 4mm
Angle of View 66°
Algorithm H.264, JPEG
File Format MOV, JPG
Video Recording Mode Manual
Recording Ca pabili ty 1920x1080
Frame Rate Up to 30 fps
Photo Capability 5M (2952x1944)
Algorithm PCM
File Format WAV
Memory Type Memory C ard (Supp ort up to 32GB)
Data Interfa ce Micro USB 2.
Wi-Fi Built-in Wi-Fi Module (IEEE 802.11b/g/n)
Wi-Fi Protocol RTSP
0
PV-NB10W
1080P Notebook Wi-Fi DVR
Quick Guide
9. Download Files to PC
9.1 Use the memory card reader to download video / photo
files.
9.2 With the device powered on and memory card inserted,
connect the device to PC by USB connecon. It will be
recognized by PC as an external drive for user to download
the video recordings and photo files.
6
Date/Time Table YYYY.MM.DD HH:MM:SS
Snapsho t
Power Input DC 5V
Power Consu mpon (Video) 350mA-380mA (Wi -Fi+80mA) / (Voice) 90mA
Charging Ti me 150min (680mA)
Baery Inp ut DC 3.7V / 1400mA polymers b aery (XK504355)
Baery Lifeme
Dimension 244x130x25 (mm)
Weight 306g
7
）
LawMate, innovaon never stops
®
V1.0
Loading...