KJB PV-500N-BUNDLE User Manual
1. BU-18
Neo
Names and Parts
1. Camera Lens
2. Microphone
3. Locking Connector
3. PV-500
Neo
Names and Parts
1
1.Battery Pack
2.Battery Lock Switch
2
3.Controller Port
4. Package Content of PV-500Neo
DC 5V 2A Charger
Lock
4GB
Memory Card
6. Battery Charging
3
a
b
c
d
※No microphones are
available for USA market.
e
PV-500N Bundle
BU-18Neo + PV-500Neo Package
LawMate, innovation never stops
®
a. BU-18Neo 2MP Camera
b. Button & Screw Kit
c. 3M Double Coated Tape
d. DIY Lens Cover Button
e. User’s Manual
1 3 2 4
15
12
13
14
11
4. Green LED - Charge
5. Red LED - Rec
6. Orange LED - Wi-Fi
7. Blue LED - Power
8. Camera In Port
10
9
3
9. Power / Wi-Fi on &
off Button
10. Rec on/stop Button
11. Memory Card Slot
12. DC 5V in Jack
13. Reset Key
14. USB Port
15. Default Key
Battery Pack
8
7
6
5
4
Controller Cable
5. Install and Remove Battery
USB Cable
Pouch
1.
European Adapter
Head
1. Connect the charger plug to the DC In Jack .
2. Plug the power cord of the charger to an AC wall outlet.
The charging starts automatically. The device can record
while charging.
● Solid green LED - the device is charging.
● Green LED goes off - the deviced is fully charged.
7. Connecting Camera to DVR
To remove the battery, gently unlock
by switching LOCK switch to the right side
and push battery in red arrow pointed
direction.
2.
To install the battery, attach the
battery to the DVR, gently push
the battery in red arrow pointed
direction. Lastly, don’t forget to slide
LOCK switch to the left to ensure it is
locked properly.
4GB
12
To connect the camera to the
DVR, fully plug the camera’s
connector end into the Camera
In port on the DVR, then lock
the connector firmly by rotang
it to the direcon of the red
arrow.
※ Only connect the camera to DVR
when system is turned off.
※ Both camera and memory card
need to be inserted to DVR to turn
the system on.
8. Connect The Wired Controller to The DVR
3
1. Plug in the Controller cable into the Control port .
3
2. Turn on the Controller, the device starts recording instantly;
When turned off, the recording stops and device powered off.
3. To turn on the device, slide the controller toggle downward
and hold for 3 seconds.
4. To turn off the device, slide the controller toggle downward
again and hold for 3 seconds.
● Solid green LED on Controller - the controller is connected.
● Solid red LED on Controller - the device is recording.
9. Connect The DVR to The Computer
With the DVR powered off, plug the USB Cable
into the USB port on DVR and the
other end to the computer.
14
14
10. Format The Memory Card
1. The camera must be connected to the DVR first.
Insert the memory card into as the icon shown on the device.
2.
11
3. With device powered off, press and hold Rec button .
4. And then press Power button for 3 seconds until you
9
see the blinking red LED.
5. Lastly, release both buttons at the same time.
● Blinking Red LED + Solid Blue LED - the memory
card is being formatted.
● All lights go off - the formatting is completed.
Caution: To make the memory card recognizable, please be
sure to format the memory card before using it for the first time.
Please note that formatting on computer is not recommended,
for it might result in the failure for the computer to recognize
the card.
11. Date and Time Setting (for Windows System)
1. From the desktop right-click to open Notepad, create a text
file named settime.txt
2. On the first line of the file, enter date and time information as
year.month.day hours.minutes.seconds
For example, suppose the time is October 16, 2015 15:00.
Then enter 2015.10.16 15:00:00
※
There should be a space left between day and hours,
and the time format should be the 24-hour format.
3. Save the file to the root directory of the memory card.
Insert the memory card into the slot, and power on the device.
4.
The date and time setting is now completed.
※
When the date and time setting is completed. The settime.txt
file should not be visible when you connect the device to
the computer again.
※Do not remove serial number sticker! Warranty is invalid if the sticker is tampered.
6 7 5
10
12. Operation
1. Power on: Press for 3 seconds.
2. Recording: With device powered on, press to start or
stop recording.
3. Wi-Fi: With device powered on, press to turn on/off Wi-Fi.
4. Power off: With no ongoing recording, press for 3 seconds.
5. Reset: When the device functions abnormally, press .
6. Restore default Wi-Fi password: long press for 4 seconds.
7. Restore default setting : press for 10 seconds.
● Solid blue LED - power on
● Solid red LED - recording on
● Blinking orange LED - device searching for Wi-Fi connection
● Solid orange LED - device is connected to Wi-Fi
※
The device powers off itself when memory card is full.
9
10
9
9
15
15
13. Download Videos and Photos From DVR
Knowing that all video files are stored in the memory card.
You can do the following to download videos.
1. Use a memory card reader to transfer files from the card to
the computer.
2. Or, connect the device to the computer with memory card
inserted. Turn on the device and it will work as a flash drive.
14. Put on DIY Lens Cover Button
Stick the tape on the button and screw it on the camera.
PV-500N Bundle
BU-18Neo + PV-500Neo Package
13
LawMate, innovation never stops
®
V1.0
Loading...