KJB PV-500ECO2 Quick Guide

1. Name and Parts

PAL NTSC

MADE IN TAIWAN

4

3. Select Video Signal System

1

2

PAL NTSC

MADE IN TAIWAN

4. Camera Setup Illustration

Connection with a portable DVR:

1. Select NTSC or PAL on the camera.

2. Plug in the camera into CAM IN socket on the DVR.

3. Power on DVR and press REC button to start recording.

1. CMOS Lens

2. Microphone

3. AV Jack

4. NTSC/PAL Switch

3

2. Package Content

AV Cable

NOTE:
Camera is not originally screwed with covert button head in the package.
Remember to screw covert button head before use.

Button Screw Kit

9V Battery Holder

(1) (3)(2)

Unscrew from mount and
screw onto center piece

PAL NTSC

1. NTSC / PAL switch is on the back of the camera.

2. Make sure the video system is selected before
turning on the DVR.

Optional Accessories

LawMate Portable DVR

Connection with AV Out cable:
If you do not use LawMate portable DVR and would like to connect
CM-BU18 to your own DVR or display device, you could use AV Out
cable to make the connection.

1. Install the device as illustration shown below.

2. Connect yellow and red cables to your DVR or display.

3. Connect 9V power-cord to your power supply.
*If you do not have the power supply, you can use our battery holder
to supply the power. Slide the back cover of battery holder to open
the battery tray. Insert a PP3 (9V) battery into battery tray.
Switch to ON position.

4. Captured images are automatically shown on the connected
DVR or display.

DVR/Display

5. Connection with Wireless Equipment

CM-BU18

CMOS Button Camera

Quick Guide

Optional Accessories
Portable Transmitter

- TB-1255/2455

1. Camera can also be connected with RF wireless equipment.

2. Connect AV jack to portable transmitter.

3. Connect DVR or any recording device with portable receiver.

4. Set transmitter and receiver at the same frequency or channel.

5. Turn on receiver’s power.

6. Captured images will be shown on receiver side.

7. Note that receiver should be connected with external
LCD / TV in order to display captured images.

9V Battery Holder

Switching Cable

(5)(4)

V1.0