KJB H6003 User Manual

H6003 INSTRUCTIONS

Includes

: iTrail

Magnetic Case

Lithium Battery Power Bank

USB Charging Cable

How To Recharge Lithium Battery Power Bank:

There is 4200mAh lithium battery cell within the power bank. Upon first time use or after long-term storage, charge the

product fully. Please note that for first time use of battery, it normally takes two or three complete charge and

discharge cycles to achieve optimal performance.

Operation Instructions:

• MINI USB input port for charging battery.

• Type A USB output port for charging iTrail.

• Indicator light is blue when discharging. Indicator light turns off when product has been fully discharged.

• Indicator light is red when charging. Indicator light turns blue to indicate full charge.

How-To Charge The Product:

1. Use USB charging cable and MINI USB connector for charging the product by connecting to computer USB port.

2. Fully charge lithium battery power bank before first time use or after long-term storage. Charging time is

approximately 5 hours, the indicator light will turn blue when fully charged.

3. The lithium battery power bank supplies DC-5V power to the iTrail. When connected to iTrail, the indicator light turns

blue. The blue light goes out when the lithium battery power bank’s power has been depleted.

**Detach iTrail when charging lithium battery power bank**

Specifications:

Cell Type: Li-ion battery Capacity: 4200mAh

Input: 5V 1A Output: 5V 1A

Charging time: 4-5 hours Cycle life :> 500 times
Operating temperature: 14°F - 120°F

How to connect lithium power bank to iTrail:

Use the white USB cable that comes with iTrail, plug one end into the iTrail and the other end into the lithium power

bank. (As seen in picture on top of page)