KJB DVR703, DVR703A User Manual

CAM-3HD

Digital Camcorder

User’s Manual

HD VIDEO

720p(1280X720)

Main Body

Camera

Accessories

USB Cable

Battery Life Time

Internal battery

Internal + Battery Pack

Name of Each Part

Operation

Button

(Record, Stop,

Battery check)

USB Port

Ball-point
Pen

Micro SD Card

Continuous recording Motion detection recording standby

max 1 hr

max 3.5 hrs

Operation

LED

Reset Switch

Mode Switch

General

Recording

Mode

Motion
Detection
Recording

Mode

Micro SD
Card Slot

Option

Battery Pack

max 1.5 hr

max 5.5 hrs

External

Micro SD Card

Micro SD Card

File management and delete

Saving the recorded files

1) In case of general video recording files, file names are created and
saved from HD_0001 to HD_9999 sequentially with "AVI" extension
in VIDEO folder.

2) In case of motion detection recording files, file names are created
and saved from M_0001 to M_9999 sequentially with "AVI" extension
in MOTION folder.

3) In case of recording in state that the middle part of files are empty,
recording file is created between file and file
Ex.) In case of recording in state that the files of HD_0001 and
HD_0003 exist, HD_0002 file is created and in case of recording
again, HD_0004 file is created.

File management and delete

Operation Guide -1

* Caution : In case of separating it from PC or charger,
please record after LED flickering is off.

HD video recording

1) Select Mode Switch to general recording mode(push it up)

2) Press and hold Operation Button more than three seconds.

3) When power is on, blue LED blinks two times and recording starts.
(LED is off during recording)

4) When you press and hold Operation Button more than three seconds
during recording, blue LED blinks five times quickly and recorded
video is saved and power is turned off.
* Recorded files are split and saved per ten minutes automatically for safe recording.

Motion detection recording

1) Select Mode Switch to motion detection recording mode

2) Press and hold Operation Button more than three seconds.

3) When power is turned on, green LED blinks two times and recording
is ready.

4) When motion is detected at camera, recording starts.
(LED is turned off during recording)

5) When you press and hold Operation Button more than three seconds,
green LED blinks five times quickly and recorded video is saved and
power is turned off.
* Motion detection file is recorded for ten minutes and it moves to motion detection
recording mode. When motion is detected again, it repeats recording for ten minutes.

In case recording does not work

I

n case of following situations, recording does not work. Please be sure

to take measures for recording.

1) In case battery needs charging
Phenomenon : red LED blinks five times quickly and power is turned
off after recording starts
Solution : Charge the product by using PC or AC charger.

2) In case there is no memory
Phenomenon : red LED is turned on for three seconds and power is
turned off after recording starts.
Solution : Insert micro SD card into product.

3) In case memory is full
Phenomenon : red LED is turned on for three seconds and power is
turned off after recording starts.
Solution : Connect product into PC and move important recorded
contents into PC and format or delete memory.

(push it down)

Specification

Item

Max. Video

Recording Time

Video Quality

Dimension

Weight

Storage Media

External Power

Battery Life Time

Operation Temp.

* Recording time can be different according to the performance of SD card.
* Micro SD card more than 64GB can be played back on the O/S more than
Windows 7.
* Product specification and appearance can be changed without notice for
the improvement of quality.

Specification

16GB : 2 hours 32GB : 4 hours

64GB : 8 hours 128GB : 16 hours

MJPG AVI 1280 X 720 Max 30fps

/ PCM 128Kbps MONO

14mm(D) x 140mm(H)

27g

Micro SD Card

DC 5V 0.5A (Long-time Recording)

max 1 hour in general recording time
max 1.5 hour in motion detection stand by time

Warranty Card

Product

Model

Purchasing date

Purchasing place

Tel.
Others
Period

Customer

Name
Address
Tel.

Digital Camcorder

CAM-3HD

1 year

Changing Mode

1) You can select general recording mode and motion detection
recording mode by mode switch.

2) You can perform the below operation according to each mode.

- General recording : HD video recording.

- Motion detection recording : when there is no motion, recording
is on standby and when motion is detected, it records by the unit
of ten minutes.

* Motion detection function can take necessary video only and can
take long-time recording according to memory in case of
connecting external power supply(battery pack, AC adaptor).
* Motion detection function can use memory efficiently, and
Internal battery can stand by for max 1 hour 30 minutes.

3) When you change mode during recording, current recording is
finished automatically and recording starts with changed mode.

Mode Switch

General
Recording Mode

Motion Detection
Recording Dode

* Before video recording,
please be sure to insert micro SD card into product.
* Do not separate micro SD card during operation.
That can be a cause of breakdown and malfunction.
Be sure to separate micro SD card after turning off the power.

Playing on PC

Watching recorded video on PC

4) General recording file can be played back in the folder of VIDEO
by the double-click of file and motion detection recording file
can be played back in the folder of MOTION by the double-click
of file.

Micro SD card more than 64GB can be played back
on the O/S more than Windows 7.

or MOTION

Charging Battery

Reset

AC 100V~220V

Longtime Recording

CAM-3HD

8

64GB

Using as a ball pen

When you hold the ring(ⓓ) and spin the rotating part(ⓒ) right and left,
ball pen refill(ⓐ) comes out or go in.

For the change of ball pen refill(ⓐ),
please hold rotating part(ⓒ) and continue to turn the part of refill(ⓑ)
to the left and when it is separated, pull ball pen refill(ⓐ) out and

insert new one into hole carefully.

* Ball pen refill standard :5799-236-410(41mm)

ⓒⓑ

ⓐ

ⓓ

Operation Guide -2

Battery remains check

When you press Operation Button shortly during recording,
battery remains are indicated by Operation LED.

1) Battery remains 100~80% : green LED is turned on for three seconds.

2) Battery remains 80~30% : blue LED is turned on for three seconds.

3) Battery remains 30~0% : red LED is turned on for three seconds.

Time Setup

1) Please insert micro SD card into device and connect device into PC.

2) Please create the file of time setup(date_time.cfg) in the root folder
of micro SD card by using the note pad of Windows, etc.

How to create the file of time setup

① Execute note pad.
② Enter date, time in order of "year month day hour minute second"

from the first column.

③ Click file and select "save as".
④ Select removable disk as a place to save.
⑤ Enter “date_time.cfg” as a file name.
⑥ Select "all file" as a file type.
⑦ Click "save" and close window for completion.

3) When you separate device from the USB port of PC, device power
is turned off and on automatically and device time is set up to the
time set at "date_time.cfg".

4) When time setup is completed, device power is turned off
automatically.