KJB DVR271A, DVR271 Quick Guide

1. Name and Parts

1. Power switch

2. Format Button

3. Photo/Rec Switch

4. HD/FHD Switch

5. Overwrite Switch

6. Reset Button

7. Memory Card Slot

8. USB Port

9. PIR Sensor

10. Rec(Red)LED

11. Overwrite(Bright Green)LED

12. Charging(Green)LED

13. Power(Blue)LED

2. Package Content

3.7V Li-ion BATTERY

BA-PV900

CAUTION

Slide the battery into place at approximately 15 degree to avoid

PV-RC10FHD

TV 1080p Remote Control Covert DVR

Quick Guide

damaging the golden connectors on the units.

Li-ion Battery

Lock

4GB

LawMate, innovation never stops

User manual

V1.0

Adapter

Memory Card

3. LED Indicators

LED Indicators

Solid Red LED Recording on

Red LED Blinks Once Snapshot

Blinking Red LED Memory Card Full

Solid Green LED Device Charging

Solid Blue LED Power On

Blinking Blue LED No Memory Card

Solid Bright Green LED Overwrite On

Li-ion

USB cable

Device Status

4. Battery Charging

3.7V Li-ion BATTERY

BA-PV900

CAUTION

Slide the battery into place at approximately 15 degree to avoid damaging the golden connectors on the units.

1. Remove the battery cover from back.

2. Slide the battery into battery tray.

3. Close the battery tray with battery cover.

4. Connect the USB cable to the base.

5. Plug the USB cable to the PC or other USB power source ( the green LED will turn on ).

6. Leave the DVR charging until the green LED is turned off.

5. Format Memory Card

1. Insert the memory card as shown in the illustration.

2. Press & hold on then power on the device.

3. You will see the Red LED blinking when the memory card is being formatted. The Red LED will be off when the memory card format is completed.

6. Operation

1.Slide the Power switch to the left.

Li-ion

2. Select operation mode by sliding Photo/Rec switch to place.

2.1 Rec: Whenever the PIR sensor is triggered, the DVR automatically starts recording. Please note the length of video varies from 5 seconds to 2 minutes depending on the movement detection.

2.2 Photo: The device takes 3 photos whenever the PIR sensor is triggered.

3. Resolution setting by sliding HD/FHD switch to place.

3.1 Video resolution: HD(1280X720@30fps) FHD(1920X1080@30fps)

3.2 Photo resolution: 2MP(1600X1200 .JPG)

7. Download Videos and Photos from DVR

1. Video and photo files are stored in the memory card.

2. There are two ways to download video/photo files.

2.1 Using memory card reader to download video/photo files.

2.2 With the device powered on and memory card inserted, connect the device to PC by USB connection. It will be recognized by PC as an external drive for user to download the video recordings and photo files.

8. Others

Please be noted that you have to turn off the device first before you change the The device may crash if you suddenly change the mode with the power on.

Photo/Rec mode.

1 3 2 4

9. Specification

PV-RC10FHD

Built-in image sensor 1/3" progressive CMOS sensor Sensor resolution 2304x1536 Sensor sensitivity 3.3 Lux @ F 2.0 Lens F/No. F 3.2 Focal Length 4mm Angle of View 66°

Algorithm H.264, JPEG File Format MOV, JPG Video recording mode Manual & Auto Recoreding Capability 1920x1080 / 1280x720 Frame rate Up to 30 fps Photo Capability 5M

Memory type Micro SD Card ( Support SDHC max.32GB) Data interface Mini USB 2.0

Date/Time Ta

Power Input DC 5V Power Consuption 250mA-390mA Standby Consuption About 5.2mA Standby time 8 days Battery Input DC 3.7V / 1100mA polymers battery

Dimension 17 x 5 x 1.5 cm Weight 110 g

ble YYYY/MM/DD, HH:MM:SS

Built-in Camera Module

Video Spec.

Storage & I/O

Misc.

Power

Physical

PIR Sensor Illustration

1.Detection Range

TOP VIEW

2.5

8.202

1.25

4.101

1.25

4.101

2.5m

8.202ft

2.5

8.202

1.25

4.101

1.25

4.101

2.5m

8.202ft

2.Detection concerns

They may fail to detect successfully if a heat source other than a human being is detected or if there are no temperature changes in or movement of a heat source. Care must generally be taken in the following cases. The performance and reliability of the sensors must be checked out under conditions of actual use.

2.5

8.202

2m 5m

5.562ft 16.404ft

SIDE VIEW

2.5

8.202

2m 5m

5.562ft 16.404ft

16.404ft

<1>Cases where a heat source other than a human being is detected

(1) When a small animal enters the detection range.

(2) When the sensor is directly exposed to sunlight, a vehicle’s headlights, an incandescent light or some other source or far infrared rays.

(3) When the temperature inside the detection range has changed suddenly due to the entry of cold or warm air from an air-conditioning or heating unit, water vapor from a humidifier, etc.

<2>Cases where it is difficult to detect the heat source.

(1) When an object made of glass acrylic or other subject which far infrared rays have difficult passing through is located between the sensor and what is to be detected.

(2) When the heat source inside the detection range hardly moves or when is moves at high speed.

3.Installation Suggestion

Definition: O - the height of object H - the height of sensor from the ground D - the distance between object and sensor

Formula: H - O / 2 D - O x 2

For example: To film a man at 180cm height in the video, the sensor should be placed at 90cm height above the ground and the man is 3.6m away from the sensor.

90CM

3.6M

7 5

180CM

PV-RC10FHD

TV 1080p Remote Control Covert DVR

Quick Guide

LawMate, innovation never stops

V1.0

KJB DVR271A, DVR271 Quick Guide

Specifications and Main Features

Frequently Asked Questions

User Manual