KJB DR100 User Manual

Playback Recorded Files

1. Accessing playback mode by pressing button.

2. Hook up earphone to listen recorded audio files.
Using controller to:
a. Short press button to play previous file.
b. Short press button to play next file.
c. Long press button to increase playback volume.
d. Long press button to decrease playback volume.

3. Press button will erase the current playback file.

+

-

+

-

LED Indication

1. No Light:

- Recorder is off.

2. Left No Light, Right Blue:

- Recorder is standby.

- Blue flash is out of battery.

Blue

3. Left Red, Right Blue:

Red

Green

- Recorder is recording.

Blue

- Red flash is memory full.

4. Left Green, Right Blue:

- Recorder is charging.

- Green light off is fully charged.

Retrieving Recorded Files

1. Use USB cable to connect to computer.

2. Turn on the recorder by pressing button .

3. Click on External Drive, open Record folder.

4. Recorded audio files are located in the folder with initial
REC in file name. Copy and paste recorded files to
preferred location.

(3)

AR-100

Covert Voice Recorder

Quick Guide

LawMate

Law Enforcement Product Manufacturer

V1.0

Name and Parts

VOX

Continuous

7 6

1. Microphone

2. On/Off Button

3. Rec/Stop/Delete Button

4. Play/Stop Button

Package Content

Earphone

USB Cable

1

9

9

5

5. Covert Piece

6. Vibration Switch

7. Voice Activation
Switch

(1)

2

3

ON

4

OFF

8. Reset Button

9. Status Indicator

10. Vol Up/Prev. File

11. Vol. Down/Next File

Size:

8

Charging Battery

1. Turn off the recorder by pressing button .

2. Use USB cable to connect to computer.

3. LED light on the bottom signal: Green

4. Green light turns off when battery is fully charged.

10

11

Operating Recorder

1. Turn on the recorder by pressing button .

2. Setting Recording Mode on left side panel.
a. Switch to top position to access voice activated
recording mode.
b. Switch to bottom position to access continuous
recording mode.

3. Setting Vibration Mode on right side panel.
a. Swtich to top position to turn on vibration alert.
b. Switch to bottom position to turn off vibration alert.

4. Press button to start recording.
a. Voice Activated Mode: When audio is detected by
internal sensor, recording will start.
If no audio is detected in 3 second period, recorder
automatically accessing standby mode.
b. Continuous Recording Mode: When recording
button is pressed, recording is continuously in
operation. Press button to turn off recording.

(2)