KJB DD804 User Manual

PRO-10G

Thank you very much for your PRO-10G purchase.
Please read this user manual carefully before using in order to
understand all functions and use properly. Be sure to keep this user
manual in secure possession for future reference

⑥

Name of each part & Composition of the product

①

⑦

⑧
⑨

⑩

⑪
⑫

⑬

<PRO-10G MAIN BODY>

②

③

④

⑤

⑭

Tel. Line Adapter

Headphone

Headphone: Jack for connecting to Headphone

Power Switch

3

Speaker out: It is used when White Noise sound is put out to
external speakers (can be purchased seperately)

4

Tel out: Jack for connecting to the phone

5

Tel in: Jack for connecting to the telephone line

6

Horizontal Bar Graph Display:

7

RF warning: Light is ON when the wireless signal is transmitting

8

TEL warning: Light is ON when the phone is being wiretapped

9

Homing switch: The Homing switch functions to decrease

RF Signal Strength Meter

sensitivity allowing user to find an accurate location of
any wireless listening or transmitting device within range.

10.

RF alarm: Light is ON when RF Signal Mode is operating

11.

Noise: Light is ON when Noise Generator is operating

12.

Telephone: Light is ON when Telephone Feature is operating
Speaker: Light is ON when the built-in speakers work

13.

Speaker mode

14.

For Detecting all "wireless transmitting

1.

devices" &/or "wireless transmitting
spy cameras" within detection range

How to operate

1. Silence Detection: can detect the wireless wiretaps and
wireless cameras by using only LED sensitive display

1.

Turn on

the switch

①

If sensitivity becomes level 10, Wireless Tapping Device may be

indicated and confirmed nearby.

②

Note, wireless camera may be around that area. Search area

naked eye and then check whether there is pin hole lens

with

or not.(Wireless spy camera tapping device)

2.Sensitivity
display LED (10
Levels) works

3. Move towards direction
of display as sensitivity
indicating LED (10

els) Strength Meter

Lev

The Homing switch functions to decrease sensitivity allowing user

③

to easily find an accurate location of any wireless transmitting
listening or recording device.

Usage

Press once: reduces sensitivity---allowing for more accurate

a.

sweep and enables to find an accurate location of any wireless
transmitting listening or wirelesss camera device.

b.

To return to Normal Mode: Press once again and this

④

returns device to original default state of sensitivity.

NOTE: There is a case where the sensitivity indication LED of
PRO-10G is still turned on even after call of the mobile phone is
completed. This is caused by communication between the mobile
phone and the communication company for 0~20 seconds.
The PRO-10G is so sensitive that the display window can be
displayed at a very short moment of electronic wave.

NOTE: Pro-MAX 10G Detects all of the following kinds of bugging devices:

- ALL GSM Bugs including Baby-Monitors/GSM Alarm/GSM Bugs

- ALL Cellular GSM/GPRS/EDGE/3G/4G Video Cameras & Listening Bugs

- ALL Transmitting Spy Phones

- ALL GPS Trackers while Transmitting

- ALL Bluetooth Active Bugging Devices

- ALL Spy Phones with Active Bluetooth/Wi-Fi

-ALL Wireless Transmitting Video Cameras up to 5.8 Ghz
PRO-10G has Detection range up to 35-40 feet depending on Power of Transmitting source

2.

Detection using RF alarm feature

●

It works exactly as #1 Silence Detection, though Speaker now Alerts

When getting closer to wireless

●

signal the sound beeps (faster).

When it is very close to the wiretaps the "beep" sound is heard.

1.Turn on

the switch

2.Press button 1
in the speaker mode

3. RF Alarm speaker
LED is on mode

4. Detection
starts

The Homing switch functions to decrease detector sensitivity and

helps find an accurate location of a wireless transmiting device.

Usage

a.

Pressing Once reduces sensitivity--- enables user to find an
accurate location of any wireless transmitting device.

b.

Press once again and this --returns unit to
original state of sensitivity.

3.

Detection using Headphone

●

It works together with #1 Silence Detection. It detects while listening

with headphone, As it is closer to wiretaps the sound varies (faster).
When it is very close to it the "beep" sound is heard.

1.Turn on

the switch

The Homing switch functions to decrease detector sensitivity and

helps find an accurate location of a wireless transmiting device.

Usage

a. Pressing Once reduces sensitivity--- enables user to find an

accurate location of any wireless transmitting device.

b. Press once again and this --returns unit to

original state of sensitivity.

2. Insert Headphone
Jack into
Headphone hole.

3. Detection
starts

4. Noise Function

Audio Tapping prevention mode

Used for preventing wire/wireless tapping, laser tapping,
recording by voice recorder, recording by tape recorder,
tapping by parabolic reflector, tapping by hidden tapping device
in wall.

1.Turn on

the switch

4. Built-in speaker
makes "shhhh" sound.

2. Press the
speaker mode
button twice

5.Adjust the volume
using volume-up­&-down buttons

3. Noise and
speaker’s
LEDs are on.

Adjust noise volume properly not to be harsh to ears so much. However,
if the volume is louder, tapping prevention is better and more efficient.

When using for laser tapping prevention, place the device close to window
and direct the speaker face to window.

During your conversation, please speak with lower volume than noise
feature for Maximum protection.
If you want a little louder noise, external speakers could be connected to
the speaker-out on the side of the product by plugging in the external
speaker's Jack. External speaker can be purchased at any electronic store.

5. Telephone tapping detection and prevention

Use for detecting and preventing wire telephone tapping device
on cable and illegally bridged.

1. Check and prepare 2 types of telephone cables and cable connector bundled together.

2. Disconnect the telephone cable from the telephone you want to search.

3. Open the rubber cover on the side of PRO-10G.

Connect the disconnected telephone cable in above step”2.” to cable connector as
shown in the picture.
Connect the other end of the black cable which is connector to the TEL IN terminal
on the PRO-10G as shown in the picture.
Connect one end of the white cable to TEL OUT ter

minal on the PRO-10G and

the other end to inlet terminal of the telephone that you disconnected in above step

“2” in order to search.

In this case, if a person named ‘C’,

unlawfully tries to listen to a telephone

communication between PRO-10G holder and a person named ‘B’, when the
PRO-10G holder is having a telephone communication with the person ‘B’, the
telephone of PRO-10G holder is STOPPED and cannot transmit or receive calls while
phone line is actively tapped by person named 'C', and the person ‘B’ and the person
‘C’ will hear a warning sound of “zzzz”. At this time, the warning LED is lighted on or
blinks. No calls can be tapped under this scenario.

Specification

PRO-10G

Radio Frequency
Gain : 20dB
Response : 10Mhz~10Ghz
Display:
LED supported by 10 levels
Main power supply :
6LF22 Alkaline battery
Manufacture : DSE Company
Made in Korea

Manufacturer assumes no liability if instructions are not followed

b

Do not touch the body of the device when there is lightning and

1

thunder. It may cause electric shock by lightning.

1

1