KJB DD1216 Specsheet

iProtect 3-Band RF Detector (Item: DD1216)

One Device shows 3 different types of detection at once displayed in a
bar graph. Registers VHF/UHF 50-700 MHz, Mobile and Wireless 700
MHz- 3 GHz and Microwave and Wireless 3-12 GHz.

Having all three on the screen visibly shows what type of signals
are being detected. This device allows the operator to set an
alarm to reject background noise to a certain threshold, so it will
only detect from at above the frequency set.

FREQUENCY RANGE: 50 MHz to 12 GHz

FEATURES:

Detects all types of RF transmissions including analog
and digital, audio and video
Frequency range 50 MHz – 12 GHz
Separation into 3 bands helps to avoid loss of
sensitivity near strong interference
ALL BANDS and ONE BAND display modes
High sensitivity to 3G and wireless protocols (Wi-Fi,
Bluetooth, etc.)
Working modes: SILENT, AUDIO and ALARM
Adjustable alarm threshold
Portable, reliable and easy-to-use
The BARGRAPH shows the momentary RF level
The HISTOGRAM displays the RF signal over 5
seconds (in 'ONE BAND' display mode)
The SIGNATURE displays the possible signal type
Built-in directed microwave antenna
Shock-resistant CNC milled duralumin housing
Rechargeable Li-Ion battery with resource of 6 hours
Controlled by microcontrollers
2x built-in OLED displays

Video Overview of iProtect DD1216

How the iProtect DD1216 Targets and Eliminates Threats

• Frequency Range: 50 MHz – 12 GHz, Band 1: 50 – 700 MHz, Band
2: 700 MHz – 3 GHz, Band 3: 3GHz – 12 Ghz

• Charging Port: USB

• Battery Recharge Time: 4 hours

• Battery Resource: 6 Hours

• Battery: Rechargeable Li-Ion 1150mAh @ 3.7v

• Threshold settings: 48 steps

• Microwave Antenna: Built-in (band 3)

• RF Connector: SMA (band 1 & 2), 50Ohm

• Working Modes: Silent, Audio, Alarm

• Display Modes: All Bands, One Band

• Indicators: Main Display & Status Display

• Operating Temp: 14-113°F

• Detector

• Rod Antenna

• Mini-USB Charging Cable

Powered by TCPDF (www.tcpdf.org)