KJB DD1215 Specsheet

iProtect Detection Wand (Item: DD1215)

The iProtect 1215 brings powerful handheld detection to the DIY user.
Conventional RF detectors are typically capable of discovering signals
up to 4-6 GHz. Higher frequencies generally stay unstudied during
sweeping procedures, unless you've invested in an expensive
spectrum analyzer. This small, handheld microwave pointer-probe
extends the checked frequency range during sweeping procedures up
to 13 GHz.

When you are looking for High
frequencies the iProtect will get the job
done!

This handheld device packs a power punch of detection in such a
small space and has a battery life of 12-15 hours. It detects video,
audio, digital or analog signals and can find surveillance bugging
devices which are usually not detectable by standard RF detectors.
The directed antenna allows the user to understand where the signal
originates from which helps to locate the source physically. Plus, with
the 16-segment indicator you get even more easy and precise
pinpointing of the bugging device. Battery 12-25 hours

Detects bugging devices omitted by standard RF detectors

Discovers microwave signals in the range of 4-13 GHz

Detects signals not depending on their type – video, audio,
digital or analogue

Built-in directed antenna

3 working modes: Normal, **Vibrating and Audio

16-segment indicator for easy and precise pinpointing of the
bugging device

Sensitivity controlled by attenuator

Antenna's directivity (out-of-direction attenuation) -6 dBm

Portable and durable duralumin body

Powered by just 1 AA (LR06) battery

Low power indication

Battery resource 12-25 hours

** how the Vibratiton mode works

Typical signals Detected by iProtect DD1215 are Wireless

microphones working on 5 GHz frequency band, Wireless video
cameras 5GHz, Covert 5GHz Wi-Fi access point, Covert 5GHz Wi-Fi
client device, Other surveillance (bugging devices) employing
frequencies between 4-13 GHz.

Great for small sweep areas, all TSCM professional
should have one their arsenal.

• Frequency range 4000 – 13000 MHz (4-13 GHz)

• Controls Power button, Mode button, ATT button

• Indicators 16-segment bargraph, Vibration, Battery state (3 colors),
Working mode, ATT state

• Battery resource 12 – 25 hours

• Current consumption Normal: 80 mA Vibrating: 180 mA Audio: 130
mA

• Power source 1 x AA battery

• Manual

• 2 AA Batteries

Powered by TCPDF (www.tcpdf.org)