Page 1
iProtect Digital RF Detector (Item: DD1206)
The iProtect 1206i is a new class of counter surveillance device.
Unlike all typical searching devices it can detect modern 'hidden' bugs
which use such protocols as Bluetooth and Wi-Fi at a long distance.
Such bugs, especially Bluetooth types, are practically undetectable by
common RF detectors due to their very low transmitted power and
special type of modulation. The i Protect DD1206 uses a separate
channel with a high, (2.4/5 G?z) frequency pre-selector to detect and
locate Bluetooth and Wi-Fi with a much higher sensitivity. The unit
also then processes the demodulated signal in order to identify which
protocol has been detected. In addition the unit can detect all
'classical' bugs and inspect them for the presence of correlation by
sending sound impulses as well as other digital transmissions at a
standard distance (GSM, 3G, DECT, etc.) The DD1206 is a
sophisticated handheld radio frequency detection device that
incorporates the ability to detect nearly any type of wireless protocol
including digital frequencies such as Wi-Fi and analog frequencies
reaching up to 12Ghz in range. Making this detection device extremely
successful at finding unwanted surveillance threats are the two
different antennas users can deploy and the demodulation feature
which enables the users to hear the sound signature of the frequency.
Now up to 12GHz the iProtect DD1206
The perfect tool in searching for digital and
analogue transmitters in the frequency
ranges
Main antenna 50MHz – 12GHz Wider coverage,
particularly at lower frequencies, has made it possible
to increase the detection distance of a conventional
VHF/UHF bug by 2-3 times, while saving perfect
sensitivity at the higher bands (GSM, Wi-Fi, Bluetooth,
etc.)
Anntena 2 1.4-2.48 GHz and 4.9-5.875 GHz This is
the first time when an affordable RF detector gets
the microwave log-periodic directed antenna supplied
in the standard set. 2-4 times longer distance to all
sources above 2GHz (Wi-Fi 2.4GHz, Wi-Fi 5GHz,
Bluetooth, Wi-Max, LTE High, etc.). The directionality
provides easy pinpointing of a wireless source. Now
you not only know that there is a Wi-Fi source, but can
quickly pinpoint it.
Increased sensitivity to Bluetooth/Wi-Fi signals allows
the operator to detect wireless sources at distance of
50 cm- 2 m
Page 2
Detects GSM, LTE, Wi-Max Bluetooth, Wi-Fi 2.4GHz
an Wi-Fi 5GHz and RF and wireless video cameras
16-segment bar graph indicator providing a wide
dynamic range
3 modes: sound, vibration and mixed
2 levels of sensitivity (attenuator)
Durable metallic body
Microprocessor controlled
Correlation function discovers FM-transmitters by the
presence of sound is different than other detectors this
unit can produce a loop-back effect A microphone
transmitter will pick up the sound and transmit the
beep. The demodulation display will pick up the
transmission and flash simultaneously. Also, when the
unit detects other transmission different sounds will
come from the unit depending the type of transmission
it detects.
1 year warranty
iProtect 1206i Digital RF Detector
How to Use iProtect 1206i Digital RF Detector
Know as the best handheld TSCM detection
device on the market iProtect.
• Detects Bluetooth, Wi-Fi, DECT, GSM, and RF
• Operation up to 20 hours
• Power 2xAAA
• Frequency range, Antenna #1: 50MHz – 12Ghz.
• Indications: Active antenna, Low battery, Mode, Identification,
Attenuator, Secondary demodulation
• Antenna 2, GHz: 2.4 - 2.48 /4.9 - 5.875
Page 3
• Detector
• Manual
• Cleaning Cloth
• 2 Antennas
• Screw driver
• 2 Batteries size AAA
Powered by TCPDF (www.tcpdf.org)
Loading...