KJB C1220, C1505, C1510, C1530, C1540 User Manual
...
QUAD or QUAD LCD Receiver Manual
Table of Contents
Warning & Precautions 2
Includes/What’s in the Box 3
Introduction 4
Quick Setup Guide & Product Features 5
Setup 6
Apple or Android App 15
ASP4 Installation Instructions 17
Playback 21
Specications 22
FAQ and Troubleshooting 23
Pictures 24
Warranty & Disclaimers 28
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
1
Do not open/modify the device, as it may cause damage to the unit and void the Warranty.
For internal repairs, consult your dealer or an Authorized Service Center.
Do not use any accessories or power supplies other than what comes with the device,
otherwise it could void the warranty.
Protect from humidity. Do not put it in water and be careful to protect it from rain, sea
water, or high humidity environment. Do not operate the unit near a bath tub, shower, sink,
swimming pool, etc.
Protect from high temperatures
To avoid damage or mis-operation of the device, only use in temperature of 0 ~ +40°C(32 ~
104°F).
Do not bring the device suddenly from a hot to a cold place, or vice versa. This may cause
damage to the inside of the unit by creating condensation.
EU Environmental Protection
The symbol of crossed-out garbage shows that this product should not be treated as
household waste, as it falls into the category of electric /electronic equipment for recycling.
This electronic device should not be disposed of in regular trash. We strongly advise you to
contact your local authority for proper disposal of this product.
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
2
Includes
QUAD Version
1. Receiver
2. RCA Cables
3. USB Cable
4. Antenna
5. Remote
6. Power Supply
QUAD LCD Version
1. Receiver
2. Remote
3. RCA Cables
4. Receiver Brackets
5. USB Cable
6. Antenna
7. Power Supply
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
3
Introduction: Xtreme Life Wireless QUAD/QUAD LCD
Thank you for purchasing the Xtreme Life Wireless QUADs, with a Digital Wireless Receiver and built in DVR
Recording Systems capable of recording on to an SD card, and has a USB to PC interface that enables Direct
to PC Video Recording and Remote Video Access. Xtreme life are battery operated hidden camera systems
was designed to be a long life battery-operated hidden video recorder. To accomplish extended battery life,
your system uses a technology known as PIR(Passive Infrared). You’ll nd the PIR sensor located next to or near
your camera. The PIR sensor regulates power to the internal video recording components and is the triggering
system that initiates recording. When there is no activity in range of the PIR sensor, the camera and the DVR will
be powered down. When the sensor is triggered it will send a signal to turn on the camera and begin recording
almost instantly. The less activity the longer the system will maintain battery life.
To access your live video remotely, simply type in the supplied website address into your internet browser to
obtain instance remote video access, whether you are at home or away from your location. Never deal with
complicated IP Conguration again. Xtreme Life Wireless QUADS allow users to connect up to 4 Wireless Hidden
Cameras to 1 receiver for a full covert video surveillance system. Download the “EZ-See” Mobile App for Apple
and Android devices, and get instance video access on the go!
All of our SleuthGear line of hidden cameras are designed and assembled in Nashville, TN USA, and backed by
our 1 year warranty. Visit our website to see the full line of SleuthGear hidden cameras at www.mysleuthgear.
com
We invite you to explore the Quick Setup Guide below to learn more how to operate your Xtreme Life
hidden camera.
Introduction: Zone Shield Wireless Quad/Quad LCD
Thank you for purchasing the Zone Shield Wireless QUADs system. This system was designed for recording
multiply cameras to your PC or recording video on the local memory card (not included), with no additional
cost to you. With the Zone Shield system you can view video wherever you are from a PC or your Smartphone,
simply type in the supplied website address into a internet browser to obtain instance remote video access or
Download the free “EZ-See” Mobile App for Apple and Android devices, and get instance video access on the go!
Zone Shield Wireless QUADS allow users to connect up to 4 Wireless Hidden Cameras from our SleuthGear
wireless Quad line to 1 receiver for a full covert video surveillance system.
All of our SleuthGear line of hidden cameras are designed and assembled in Nashville, TN USA, and backed by
our 1 year warranty. Visit our website to see the full line of SleuthGear hidden cameras at www.mysleuthgear.
com
We invite you to explore the Quick Setup Guide below to learn more about how to operate your Zone Shield
Wireless hidden camera.
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
4
Quick Setup Guide
1. Step 1: Unpack unit and insert the CD into your PC to install the provided ASP4 software on your PC.
2. Step 2: Use the provided USB cable to connect the QUAD LCD receiver to your PC.
3. Step 3: Click on the two gears icon for the Settings screen to personalize your recording preferences and
set up for remote view.
4. Step 4: Click the Quad View icon or Channel icons to return to the main screen.
5. Step 5: Plug in the Zone Shield Wireless device. The ASP4 viewing window on yor PC should now
display what the camera sees.
No more IP hassles, router congurations, or port forwarding. Locate the website address on the label found
on the back of your receiver, install ASP4 software on your PC, connect your receiver to your PC using the
provided USB cable, and the Xtreme Life unit is ready for use.
Product Features
• Build Your Own Hidden Camera System: Connect up to 4 of Any Combination of Xtreme Life or Zone
Shield QUAD Wireless Hidden Cameras
• 2 Dierence Wireless Receiver Choices: QUAD or QUAD LCD(includes built-in LCD screen)
• 4 to 1 Connectivity: Choose 1 Receiver Connect up to 4 Cameras
• Digital 2.4GHz Wireless Video Transmission with No Interference
• Continuously Power Systems for Round the Clock Surveillance
• Indoor/Outdoor Hidden Video Surveillance Systems (select models)
• Night Vision - Hidden IR Lights Capture Video at Night (select models)
• Time/Date Stamped Files
• Record your Video to PC or a Memory Card
• ASP4 PC Software
• Live Remote Video Access
• Live Mobile & Smartphone Video Access
• Free Mobile Application (Apple, Android)
• When Privacy Matters our Completely Concealed Cameras Hide in Plain Sight
• No Visible Wires
• 1 Year Manufacture Warranty
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
5
Initial Setup
Pairing Camera and Receiver
1. Connect the provided power supply to your camera. Now you are ready to pair your camera with the
receiver.
2. Turn on your receiver (see Power Button location on Pg. 3):
a) If using the QUAD LCD receiver (Fig 2) simply press the Power Button.
b) If using the QUAD receiver (Fig 2) connect the provided RCA cables from the video output on the
receiver to the input on a TV or monitor, then press the Power Button.
The Power LED will glow red when the power is on.
3. What is Pairing? Pairing creates the secure connection between the receiver and the camera(all units are
paired at the factory for easy setup).
Note: The receiver cannot be plugged into the computer via the USB cable, while attempting to pair.
a) Select a channel (1-4) on the receiver by pressing the pair button - Fig. 1.
b) Press and hold the pair button until the channel LED light ashes blue - Fig. 2
c) Press the pair button on your camera (see Pair Button location on Pgs. 24-25)
d) If the pairing is successful the blue channel LED on the receiver will ash rapidly and the camera
image will be shown on the monitor or TV.
4. To pair additional cameras press the pair button and quickly release it to change the receiver channel.
Then repeat pairing process from step 3 on a new channel.
Fig 1 Fig 2
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
6
Set up the PIR: Xtreme Life™ Wireless QUAD/QUAD LCD
( If your unit is battery operated, it comes with a PIR)
P Passive InfraRed (PIR) sensors detect levels of infrared radiation (IR). The hotter an object is, the more
IR it emits. The PIR sensor, using very little power, allows the transmitter to stay o until activity
is detected, conserving battery life. When there is a change in IR levels, considered motion, the
transmitter will turn on. When the transmitter turns on, it will automatically pair with the receiver. In
order for the transmitter to automatically pair with the receiver, they will rst need to be manually
paired. See Initial Setup (pg. 4) for pairing instructions.
P When the transmitter and receiver pair, the
camera’s image will be shown on the monitor.
When the PIR sensor no longer detects a
change in IR, the transmitter will turn o
thus conserving the battery life. While the
transmitter is turned o, the camera images will
go blank and the image to the right will appear
on your LCD screen or monitor . When using /
viewing ASP4 software, the camera images will
freeze. The next time the PIR detects IR and
triggers the transmitter, the image will resume
transmitting video.
EITHER/OR
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
7
Remote Control
Button Function Description(s)
Power
Playback Press the
button to get
to the playback
menu. During
playback, press
the button
to pause,
press again to
continue
Panic
Record
QUAD QUAD display
SEQUENCE Auto sequence
Start to record
manually. Press
again to cancel
recording
mode.
mode
display mode
Button Function Description(s)
Numbers Numbers 5
to 0. English
characters and
punctuation
marks “•_•”
Clear
Return Return to last
page
Confirm Enter
Up/Down/
Right/Left
MENU Menu
CH1 Channel 1 &
Number 1 &
CH2 Channel 2 &
CH3 Channel 3 &
CH4 Channel 4 &
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
punctuation
marks “-/+”
Number 2 & “A
B C”
Number 3 & “D
E F”
Number 4 & “G
H I”
8
MENU Key sound o
Lock Key Lock
Digital Wireless Receiver Type
Zone Shield QUAD Fig 1
Channel LED
Indicator (Blue)
SD Slot
QUAD View/Single CH
Switching Button
Antenna
(SMA Reverse)
REC LED (Green) Pairing Button
With LCD Screen
Zone Shield QUAD LCD Fig 2
A/V Out
Power
Socket
Alarm Out Power LED
Power
Button
(Red)
A/V Out
Mini USB Port
Channel LED Indicator (Blue)
Mini USB Port
Antenna
(SMA Reverse)
Speaker
Power Button
Power LED (Red)
Power Socket
Alarm Out
KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear
9
REC LED (Green)
SD Slot
QUAD View/Single
CH Switching Button
Pairing Button
Loading...