Kitsound HIVE 2 User Manual

kitsound.co.uk

All trad emarks a re acknowledge d as the propert y of their respec tive owners.

Unless ot herwi se stated their use do es not imply t hat the trade mark owner is alia ted

JB. 5614 -a/ KSHI VE2 / M ade in China. © KitS ound™ 2017. Christc hurch, Dorset, BH23 4 FL, UK

with Kit Sound or endors es the products he rein.

HIVE 2

WIRELESS SPEAKER

USER MANUAL

Please read this manual carefully before use.

Box contents

• KS Hive 2

• Micro USB charge ca ble

• 3.5 m m aux cab le

• Ca rry bag

• User manual

2 3

Functions

1. MFB (multi-function but ton)

2. LED indicator

3. Volume –/Previous track

4. Volume +/Next track

5. Power

6. Battery LED indicator

7. Aux inpu t

8. Micro USB charge port

9. NFC

21 3 94 5 6 7 8

Charging the battery

The Hive 2 has a buil t-in rechargeable lithium battery. Make sure the

Hive 2 is switched o. Connect one en d of the Micro USB charge

cable to the Micro USB charg e port (8) on the Hive 2 and connect
the other end to your PC or USB mai ns adaptor. The batter y will
start charging.

• It t akes up to 4.5 ho urs to ful ly charge the bat tery

• Whilst ch arging, the battery LED ind icator (6) will ash re d when

Battery protection mode

– If you haven’t used the speaker for 90 days, the spea ker will

switch to battery protection mode automatically

– To keep the rechargeable battery in g ood con dition, please

discharge and recharge speaker ever y 3 months, espec ially
if you are not using the speaker for lon g periods of time

– To cancel the b atter y protection mod e, simply plug the H ive 2

into a charger

below 30%, ash gree n and red when between 30 – 70%, and
ash gre en when above 70%

• When ful ly charged, the batter y LED indi cator (6) will turn s olid green

4 5

Getting started

– To turn the Hive 2 on, press and hold Power (5) for 5 seconds.

To turn the Hive 2 o, press and hold Powe r (5) for 5 seconds

whilst it is on

– The Hive 2 has an auto power o fe ature to save battery power

when not in use. The Hive 2 will automatical ly switch o if it has

not played any audi o for 15 minutes

– Please ensure the rubber feet are free fro m dirt to prevent the

speake r moving/vibrating when play ing music. If the feet need
clean ing, simply wipe them with a damp cl oth

Battery LED indicator

Whilst the Hive is turned o n and in us e, the Battery LED indicator (6)
will light up to indicate how much power is remai ning in th e battery.
It will li ght up as the follow ing:

• Green when the bat tery is at 70% charge or above

• Green and red when the batte ry is between 3 0% – 70%

• Red when th e battery is below 30%