Kitsound BOOMBAR 2 User Manual

USER MANUAL

INSTRUKCJA OBSŁUGI

FELHASZNÁLÓI ÚTMUTATÓ

NÁVOD K OBSLUZE

NÁVOD NA POUŽÍVANIE

kitsound.co.uk

BOOMBAR 2

WIRELESS

SPEAKER

JB.3 053 / Made in China. © KitSound™ 2014

Christchurch, Dorset. BH23 4FL

PL Nie wyrzucaj baterii litowo-polimerowych do ogólnych śmieci. Prosimy o ich zwrot do

odpowiednich punktów zbioru HU A lítium polimer akkumulátorokat ne dobja általános

hulladékgyűjtőbe. Kérjük, juttassa el az akkumulátorokat egy újrahasznosító gyűjtőhelyre

CZ Nelik vidujte lithium-polymerové baterie spolu s komunálním odpadem Zaneste je do

sběrného dvora SK Lítium-polymérové batérie nelikvidujte spolu s bežným domovým

odpadom. Odovzdajte ich na zbernom mieste určenom na recyklovanie batérií

EN Please recycle this packaging responsibly PL Prosimy o właściwy

recyk ling tego o pakowania HU Kérjük, hasznosítsa újra a csomagolást

CZ Recyklujte toto balení šetrně SK Obal zodpovedne recyklujte

We are craftspeople. We are musicians.

We are KitSound

™

And we all commit ourselves to achieving

one shared goal: Bringing people closer to

their music. By truly understanding music we

stay true to its craft. Pure, rich, incredible sound.

We’ll settle for nothing less.

At KS we believe your music deserves to be

showcased on great quality products that don’t

cost the earth. We might not all share the same

taste in music (the ferocious disputes on music

forums prove that), but whether it’s Irish folk,
death metal or any number of obscure genres

which seem to be multiplying by the minute,

the artists responsible for connecting with you

through their craft have bared their souls to do so.

And we think that’s worth celebrating.

6 7

Please read this manual carefully before use.
Box contents:

• KS BoomBar 2 wireless speaker

• Charge cable

• 3.5 mm to 3.5 mm audio cable

• Carry case

• User manual

Functions:

1. Bluetooth indicator light

2. Play/Pause/Pairing button

3. Volume up/Next track button

4. Volume down/Previous track button

5. USB charging port

6. Aux-in port

7. ON/OFF switch

8. Built-in microphone

Instructions for use

Charging the speaker

It is recommended that you give the speaker a full
charge before its first use.

1. Plug the micro USB end of the charge cable into
the speaker

2. Plug the standard USB cable end into either a
computer or a USB mains charger

3. The ON/OFF switch will be orange whilst charging

4. When charging is complete, the orange light will
go out

Note: It may take up to 6 hours before the speaker is
fully charged. Please allow up to 10 hours for the
first charge.

Pairing the speaker to your device

Before you can use the speaker via Bluetooth, it will
need to be paired to your device.

To do this:

1. Slide the power switch to the ‘ON’ position

2. After 6 seconds, the speaker should automatically
enter pairing mode

3. The Bluetooth indicator light will be flashing
blue quickly

4. Turn your device’s Bluetooth ON and search for
new devices

5. When the BoomBar 2 appears in the list, select it
and if asked for a passcode, enter ‘0000’

6. The speaker should then be paired to your device

[continued...]

English / Polski / Magyar / Čeština / Slovenčina

1

4

2

3

8

7

6

5

8 9

Note: Pairing mode will be active for 3 minutes.
After this, the light will turn a solid blue. To re-activate
pairing mode, either turn the speaker off then on
again, or press and hold the ‘Pairing’ button until
the light starts flashing again.

To pair additional devices to the speaker, first
make sure the Bluetooth on any devices that have
already been paired to the speaker has turned off.
Then follow the above instructions from step 1.

Playing music on your speaker

Bluetooth

If already connected to the speaker via Bluetooth,
simply find and play the music on your device and
the sound will play through the speaker. Some devices
may require you to select the audio output. You
should be able to do this by going to the ‘Listen via’
or ‘Play via’ menu. If unsure, please refer to your
device’s manual.

If you are using an A2DP Bluetooth-enabled device,
you will be able to use the following functions on
the speaker:

• Play/Pause (2) – Short press

• Next track (3) – Short press

• Previous track (4) – Short press

Auxiliary

Using the provided cable, you can connect your
device directly to the speaker.

To use this, simply:

• Slide the power switch to the ‘ON’ position (7)

• Plug the cable into the speaker’s Aux-in port (6)

and your device

• Press play on your device

When playing music using the cable, you will not
be able to use the Play/Pause, Next track and
Previous track functions or change the volume
on the speaker.

Changing the volume

Bluetooth

This can be done on both the device you are playing
music from and on the speaker. To change
the volume on the speaker, press and hold
(do not short press otherwise it will skip track)
the Vol+ (3) or Vol– (4) button.

Auxiliary

Volume controls are disabled on the speaker when
connected via auxiliary. The volume can only be
changed on the device playing audio.

[...continued] Pairing the speaker to your device

[continued...]

10 11

Please note

Your device will have an internal amplifier and if it
is playing digital files like MP3s it will also have an
integrated DAC (Digital Audio Converter). If you turn
the volume up to 100%, your device will be sending
a distorted signal. To avoid this, and to get the best
quality from the speaker, we recommend that you
do not run your device any higher than 95% volume.
Some devices output higher than others, so you may
need to reduce the volume if you experience distortion.

Hands-free

The speaker comes equipped with a microphone so
you can take phone calls whilst connected. Should
you receive an incoming phone call, the Play/Pause
button (2) becomes an Answer/End call button. If you
receive a call whilst music is playing, press the
Play/Pause button to answer. To end the call, press
the Play/Pause button again and your music should
resume playing (dependant on device).

We apologise for any inconvenience caused by minor inconsistencies in these
instructions, which may occur as a result of product improvement and development.

S/N 65 dB
Bluetooth V2.1 A2DP, AVRCP
Bluetooth range up to 10 m
Frequency response 60 Hz – 20 kHz
Drivers 2 x 50 mm
Output RMS 2 x 5 W @ 2 ohm
Play time up to 10 hours
Charging time up to 4 hours

Troubleshooting

We hope you’ve now got all the information you need
to get started, but if you’re having problems with
anything, please feel free to contact us at:
[e-mail]

Specifications

Care for your BoomBar 2

Please DON’T:

• Get the BoomBar 2 wet

• Drop the BoomBar 2 as this will invalidate

your warranty

• Open up the BoomBar 2. There are no user

serviceable parts inside

• Expose the BoomBar 2 to extreme temperatures

or rapid changes of hot to cold or vice versa

Please DO:

• Clean the BoomBar 2 with a soft dry cloth and

no detergents

[...continued] Changing the volume