Page 1
WE’VE GOT YOU COVERED WITH THE
Protective case for the
New BBC micro:bit
V1.0
Page 2
BUILD INSTRUCTIONS
Push Large Screws
1
through the front panel
and lay flat with text
facing down.
Stack each layer as shown onto the screws,
2
then tighten the nuts. The micro:bit will sit,
display towards the front panel, between the
dividers in the middle.
Please place your
micro:bit in here
Page 3
Attach battery pack onto the back panel,
3
using the provided sticky pad. The wires will
thread neatly through the curved channels,
and the sticky pad fits between them.
*battery pack not included
Page 4
TOOLS REQUIRED:
WARNING: Contents may inspire creativity
• Flat Head Screwdriver
CONTENTS
STOCK CODE
56102
x4
x4
x1
T: +44 (0) 115 970 4243
W: www.kitronik.co.uk
E: support@kitronik.co.uk
Designed & manufactured
in the UK by
For more information on RoHS and CE please visit kitronik.co.uk/rohs-ce. Children
assembling this product should be supervised by a competent adult. The product
contains small parts so should be kept out of reach of children under 3 years old.
kitronik.co.uk/twitter
kitronik.co.uk/facebook
kitronik.co.uk/youtube
kitronik.co.uk/instagram
Loading...