KITO TWER2, TWER2SP, TWER2SG, TWER2M Operation Manuals

OM No.TWER 2-0903-MG-01

Introduction

KITO Twin Hook Electric Chain Hoist is intended to make accurate and safe parallel operation with the single motor and twin

hooks, which is best suited to applications where a long object or even lifting is required by using two lifting points.

Safety Precautions

Disassembly, assembly, repair, and adjustment of the electric chain hoist should be performed • only by maintenance personnel.

Failure to follow this precaution may cause serious accidents leading to serious or even fatal injury.

DANGER

PROHIBITED

ER2 Twin Hook Electric Chain Hoist

(250kg to 5t)

Operation Manual

(TWER2/TWER2M/TWER2SP/TWER2SG)

COMPULSORY

This operation manual describes specific information regarding the Twin Hook Electric Chain • Hoist. Before use, read and comply with both the ER2 Series Electric Chain Hoist (250kg to 5t) Owner's Manual (separate volume) and this manual. Sufficiently lubricate the load chain and idle sheave.•

Failure to follow these precautions may cause serious accidents leading to serious or even fatal injury.

Product Specifications

This twin hook electric chain hoist is designed the same as a standard hoist. Please refer to the sections of "Product

Specifications" in "ER2 Series Electric Chain Hoist Owner's Manual" (separate volume).

Trolley Configurations & Name

■

TWER2M (Motorized Trolley)

TS2 Series plane trolley

Suspender

Frame F

Chain guide

Balance weight

Connection board

Idle sheave

Span

Nut

Screw fitting

Bottom hook 2

Frame M

Cushion rubber or chain spring

Stopper (load side)

Bottom hook 1

MR2 Series motorized trolley

ER2 Series Electric Chain Hoist

Steel bucket dedicated for twin hook type

Suspender

Cushion rubber

Stopper (no-load side)

■

TWER2 (Hook suspension)