KitchenAid RVSA, 221 User Manual
This attachment has been approved for use with
all KitchenAid
®
household stand mixers
RVSA
KitchenAid
St. Joseph, Michigan USA
Off Stir 2 4 6 8 10
Solid State Speed Control
ROTOR SLICER/SHREDDER
2
arb
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put mixer in water or other
liquid.
3. Close supervision is necessary when any appliance is used near children.
4. Unplug from outlet when not in use, before putting on or taking off parts,
and before cleaning.
5. Avoid contacting moving parts. Keep fingers out of discharge opening.
6. Do not operate the mixer with a damaged cord or plug or after the mixer
malfunctions, or is dropped or damaged in any manner. Return the mixer
to the nearest Authorized Service Center for examination, repair or
electrical or mechanical adjustment.
7. The use of attachments not recommended or sold by KitchenAid may cause
fire, electric shock or injury.
8. Do not use the mixer outdoors.
9. Do not let the cord hang over the edge of table or counter.
10. Never feed food by hand. Always use food pusher.
11. Blades are sharp. Handle carefully.
12. This product is designed for household use only.
SAVE THESE INSTRUCTIONS
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on
your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to hazards that can kill or hurt you and
others.
All safety messages will be preceded by the safety alert symbol
and the word “DANGER” or “WARNING.” These words mean:
You will
be killed or seriously injured
if you don’t follow instructions.
You can
be killed or seriously injured
if you don’t follow instructions.
All safety messages will identify the hazard, tell you how to reduce the chance
of injury, and tell you what can happen if the instructions are not followed.
ý
!
ý
WARNING
!
ý
DANGER
!
3
TO ATTACH:
Before attaching accessory, turn off
and unplug unit.
Loosen attachment knob (1) by turning it counterclockwise. Remove
attachment hub cover. Insert attachment shaft housing (2) into attachment
hub (3) making certain that attachment power shaft fits into square hub
socket. Rotate attachment back and
forth if necessary. When attachment
is in proper position, the pin on the
attachment will fit into the notch on
the hub rim. Tighten attachment knob
until attachment is completely
secured to mixer.
arb
2
3
1
TO ASSEMBLE:
Attach shaft (A) to desired cone (B).
Insert square end of shaft in square
opening of housing and tighten by
turning cone clockwise. Reverse to
remove. Insert the cone assembly into
housing (C) so shaft fits into square
hub socket. As you insert the cone
assembly, lift up on the latch (D) and
turn the cone assembly until it fits
squarely in the attachment hub.
A
B
Food Pusher
Housing
Shaft
Fine Shredder
Coarse Shredder
Thick Slicer
Thin Slicer
C
D
Loading...