Page 1
Page 2
Page 3
1 242915 Seal - Closure
2 241499 Cover - Switch
3 SD-32-23 Self-Tapping Screw 8 x 3/8 Phil. Pan Hd., Type B
4 SD-19-31 Self-Tapping Screw 8 x 1/2 Phil. Pan Hd., Type B
5 SD-9-14 Self-Tapping Screw 4-40 x 5/8 Phil. Pan Hd., Type F
6 241499 Switch & Magnet Assy
**7 114907 Ring - Splash Guard
**8 240871 Splash Guard Assy. (Incls. item 7)
9 114892 Flange - Sink
10 201462 Seal - Sink Flange
11 114898 Washer - Pressure
12 114897 Screw - Adjusting
13 114891 Ring - Support
14 116064 Snap Ring & Cap Assy. (Incls. item 16)
15 114909 Screw - Hold-Down
16 115803 Cap - Snap Ring
17 114899 Plate - Pressure
18 114905 Ring - Seal
*19 242295 Upper & Lower Housing Assy
*20 242296 Upper & Lower Housing Assy
21 SC-18-70 Mach. Screw 8-32 x 7/16 Phil. Pan Hd
22 242481 Plug - Drain (Dishwasher)
23 241499 Bracket - Switch Mounting
*24 241203 Seal - Cover
*25 SD-9-14 Self-Tapping Screw 4-40 x 5/8 Phil. Pan Hd., Type F
*26 241448 Switch & Magnet Assy
*27 241449 Bracket - Switch Mounting
*28 SD-9-39 Self-Tapping Screw 8-32 x 3/8 Phil. Pan Hd., Type B
*29 241449 Cover - Switch
*30 241251-1 Control Cover Assy. (Incls. item 24)
**242978 Closure Assy. (Incls. item 1)
*242761-2 Upper Housing Assy. (Incls. items 19 & 22)
**242761-1 Upper Housing Assy. (Incls. items 20 & 22)
*241449 Switch, Cover & Bracket Assy. (Incls. items 10, 25, 26, 27 &
29)
*Use with Batch Feed Models **Use with Continuous Feed Models
Note 1: Parts 2, 6 & 23 have been discontinued, order *241499
to convert to new style.
Note 2: Order switch, cover & braket ass'y 241449
Page 4
Page 5
1 SD-19-31 Self-Tapping Screw 8 x 1/2 Phil. Pan Hd., Type B
*2 114911 Clamp - Conduit
*3 240073 Conduit Assy
**4 See Note Stator Assy. ( 230 V, 50 Hz ) (KWE)
*5 See Note Stator Assy. ( 230 V, 50 Hz ) (KWD)
**6 See Note Stator Assy. ( 230 V, 50 Hz ) (KWI)
*7 See Note Stator Assy. ( 230 V, 50 Hz ) (KWS)
8 278497 Screw Assy. (Protector)
**9 201875 Protector - Overload (Manual) (KWE/KWI)
*10 201876 Protector - Overload (Automatic) (KWD/KWS)
11 SD-12-30 Self-Tapping, Screw 6-32 x 5/16 Phil. Pan Hd., Type T
12 115314 Barrier - Elec. Enclosure
13 70487-16 Capacitor
14 108871 Clip - Capacitor Retainer
15 240082 Bracket & Bearing Assy
16 202559 Screw - Mach. Grounding
17 109923 Cover - Elec. Access
18 SD-12-30 Self-Tapping Screw 6-32 x 5/16 Phil. Pan Hd., Type T
19 113690 Mach. Screw 10-32 x 5 5/8 Indented Hex Hd
20 SD-33-37 Self-Tapping Screw 6-32 x 1 Phil. Pan Hd., Type T
21 113657-4 Reversing Relay Assy.
22 118107 Switch & Diode Assy. (KWI-200 & KWS-200X ONLY)
23 See Note Rotor Assy.
24 240509 Key - Sq. Mach
25 240083 Splice Connector
26 240063 Terminal Clamp
27 WS-28-18 Flat Washer
28 WL-7-12 Lock Washer
POWER PAK
* Use on Batch Feed Models
** Use on Continuous Feed Models
Note: Order Appropriate Power Pak
4169565 Power Pak (230 V., 50 Hz.) (KWE)
4169564 Power Pak (230 V., 50 Hz.) (KWD)
4169563 Power Pak (230 V., 50 Hz.) (KWI)
4169562 Power Pak (230 V., 50 Hz.) (KWS)
Page 6
Page 7
1 115804 Seal - Shredder Ring
2 242555 Ring - Shredder
3 NS-17-41 Jam Nut 5/8-18 Hex Fin
4 240290 Lock - Jam Nut
5 242556 Flywheel
6 202732 Washer - Wear
7 202927 Sleeve - Seal
8 201444-8 "O" Ring
9 201469 Seal - Water
10 115805 Felt (Lubricant)
11 115818 Seal - Spout
12 240094 Spout & Seal Assy. (Incls. item 11) (Brass)
13 NS-13-2 Full Nut 1/4-20 Hex Fin
14 115866 Screw - Special
15 241026 Flange - Spout
16 115511-1 Lower Housing & Bearing Assy
17 202734 Washer - Upper Thrust
18 240592 Felt Wiper Kit
19 WS-11-50 Washer (Nylon)
20 115461 Washer - Wavy
21 WS-11-49 Washer
240593-1 Seal Kit (Incls. items 6, 7, 8, 9, 10 & 17 thru 21)
240594-1 Seal & Lower Housing Kit (Incls. items 6, 7, 8, 9, 10 & 16
thru 21)
201252 Spout Screw Assy. (Incls. items 13 & 14)
242028 Flywheel Assy. Kit (Incls. items 5 & 6)
Page 8
Page 9
1 SD-15-41 Self-Tapping Screw 8-32 x 1/2 Phil. Pan Hd., Type TT
**2 242060-3 Cap - Top (KWI)
*3 243144 Top Cap & Label (KWS)
4 115409 Button - Anti-Jam
5 SD-12-32 Self-Tapping Screw 6-32 x 3/8 Indented Hex Washer Hd., Type T
6 115425 Insulation - Upper
7 115365 Liner - Drain
8 242024 Trim - Band Assy
*9 242119-3 Lower Shell & Label Assy. (KWS)
*10 242119-4 Lower Shell & Label Assy. (KWI)
*242115-5 Cap, Shell & Trim Band Assy. (Incls. items 3, 8 & 9) (KWS)
**242115-6 Cap, Shell & Trim Band Assy. (Incls. items 2, 8 & 10) (KWI)
* Use on Batch Feed Models ** Use on Continuous Feed Models
Page 10
Page 11
**1 115353-3 Shell - Rear (KWE)
*2 115352-3 Shell - Rear (KWD)
3 115369 Self-Tapping Screw 6-20 x 11/16 Phil. Pan Hd., Type B
**4 115669-6 Front Shell & Label (KWE)
*5 115669-5 Front Shell & Label (KWD)
*Use on Batch Feed Models
**Use on continuous Feed Models
Loading...