® Ice Maker
PRODUCT MODEL NUMBERS
KUIA18NNJ KUIS18NNJ
KUIA18PNL KUIS18PNJ
KUIS185J KUIV18NNM
Electrical: 115-volt, 60-Hz, AC-only, 15-ampere grounded circuit is required. A time-delay fuse or circuit breaker and separate circuit is recommended.
Water: A cold water supply using 1/4 in. O.D. soft copper tubing with shutoff valve.
Drain: Either a gravity-drain system or condensate pump to carry water to an existing drain.
CABINET OPENING DIMENSIONS
1. Recommended location for electrical and plumbing fixtures.
2. Floor level
141/2" (36.8 cm)
34" (86.4 cm) Min.
341/2" |
|
|
|
|
|
|
|
281/2" |
||
(87.6 cm) |
|
|
|
|
|
|
|
|
|
(72.4 cm) |
Max. |
|
|
|
|
9" |
|
|
|||
31/2" |
|
|
|
|
||||||
|
|
|
(8.9 cm) |
(22.9 cm) |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
24" (60.1 cm)
18" (45.7 cm)
DRAIN REQUIREMENTS
1.Water Pan Drain
2.Water Valve
"
151/4"
(38.7 cm)
27/8" (7.27 cm) |
17/8"
20" (50.80 cm)
Drain lines must have a minimum of 5⁄8 in. (15.88 mm) inside diameter.
Drain lines must have a 1 in. drop per 48 in. (2.54 cm drop per 122 cm) of run or 1⁄4 in. drop per 12 in. (6.35 mm per 30.48 cm) and must not have low points where water can settle.
The ideal installation has a 1-1⁄2 in. (3.81 cm) standpipe installed directly below the outlet of the drain tube as shown.
You must maintain a 1 in. (2.54 cm) air gap between the drain pump hose and the standpipe.
|
|
|
|
|
1" (2.5 cm) |
2 |
1. Drain Hose |
|
|
|
|
|
|
||||
|
|
|
11/2" (3.8 cm) |
2. |
1 in. (2.54 cm) Air Gap |
|||
|
|
|
||||||
|
|
|
3 |
3. |
Standpipe |
|||
|
|
|
|
|
|
4 |
4. |
Center of drain should be 20 in. |
|
|
|
|
|
|
|
|
(50.80 cm) from front of door. |
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation |
Ref. 2217251 |
Instructions packed with product. Specifications subject to change without notice. |
05-22-03 |