Thank you for Choosing KitchenAid ®Appliances.
We hold our company to the highest quality standards and it is important to us that you have a positive experience owning a
KitchenAid ®product.
Foryour convenience, we have provided an easy to follow User Instruction Book. These instructions include a "Troubleshooting"
section to help you through any problems you may encounter.
For additional information, you can visit the Frequently Asked Questions (FAQs)section of our website at www.kitchenaid.com. If
you need further assistance using your KitchenAid dishwasher, please contact us at 1-800-422-1230. In Canada: visit
www, kitchenaid.ca or call 1-800-807-6777.
Have your complete model and serial number ready. You can find your model and serial number on the label located near the door
on the right-hand or left-hand side of the dishwasher interior.
Para obtener acceso a "lnstrucciones para el usuario de lalavavajillas" en espa_ol, o para obtener informaci6n adicional acerca de
su producto, visite: www.kitchenaid.com
Tenga listo su nOmerocompleto de modelo y de serie. Puede encontrar su nOmero de modelo y de serie en la etiqueta ubicada
cerca de la puerta, al lado derecho o izquierdo del interior de la lavavajillas.
Table of Contents
DISHWASHERSAFETY.............................................................1
QUICK STEPS.............................................................................3
DISHWASHERUSE ....................................................................3
CYCLE AND OPTION DESCRIPTIONS....................................4
DISHWASHERFEATURES........................................................6
DISHWASHERCARE .................................................................8
TROUBLESHOOTING................................................................8
WARRANTY..............................................................................10
Your safety and the safety of others are very important.
We have provided many important safety messages in this manualand on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
W10193740A
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
• Read all instructions before using the dishwasher. • Do not tamper with controls.
• Use the dishwasher only for its intended function.
• Use only detergents or rinse agents recommended for use in
a dishwasher, and keep them out of the reach of children.
• When loading items to be washed:
1) Locate sharp items so that they are not likely to damage
the door seal; and
2) Load sharp knives with the handles up to reduce the risk
of cut-type injuries.
• Do not wash plastic items unless they are marked
"dishwasher safe" or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.
• Do not touch the heating element during or immediately after
use.
• Do not operate the dishwasher unless all enclosure panels
are properly in place.
• Do not abuse, sit on, or stand on the door, lid, or dish racks
of the dishwasher.
• To reduce the risk of injury, do not allow children to play in
or on the dishwasher.
• Under certain conditions, hydrogen gas may be produced in
a hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the dishwasher turn on all hot water faucets and let the
water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
• Remove the door or lid to the washing compartment
when removing an old dishwasher from service or
discarding it.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for
electric current. The dishwasher is equipped with a cord
having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with all local
codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
SAVE THESE INSTRUCTIONS
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
Check with a qualified electrician or service representative
if you are in doubt whether the dishwasher is properly
grounded. Do not modify the plug provided with the
dishwasher; if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
For a permanently connected dishwasher:
The dishwasher must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the dishwasher.
Tip Over Hazard
Prepare and load
dishwasher.
_ Select a cycle and option.
for cleaning and
rinse aid for
drying.
Add detergent
...;.,i__!!_'.'_.
Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks and other
hard items from the dishes. Remove labels from containers before
washing.
Upper rack Lower rack
Make sure nothing keeps spray arm(s) from
spinning freely. It is important for the water
spray to reach all soiled surfaces.
) ._
• Make sure that when the dishwasher door is closed no items
are blocking the detergent dispenser.
• Items should be loaded with soiled surfaces facing down and
inward to the spray as shown. This will improve cleaning and
drying results.
• Avoid overlapping items like bowls or plates that may trap food.
• Place plastics, small plates and glasses in the upper rack.
Wash only plastic items marked "dishwasher safe."
• To avoid thumping/clattering noises during operation: Load
dishes so they do not touch one another. Make sure lightweight
load items are secured in the racks.
When loading silverware, always place sharp
items pointing down and avoid "nesting" as
shown.
Start dishwasher.
...... ,
Add Detergent
NOTE: Ifyou do not plan to run a wash cycle soon, run a rinse
cycle. Do not use detergent.
• Use automatic dishwasher detergent only. Add powder, liquid
or tablet detergent just before starting a cycle.
• Fresh automatic A
dishwasher detergent
results in better
cleaning. Store tightly
closed detergent B
container in acool, dry
place.
A. Cover latch
B. Main Wash section
C. Pre-Wash section
• The amount of detergent to use depends on:
How much soil remains on the items - Heavily soiled loads
require more detergent.
The hardness of the water - If you use too little in hard water,
dishes won't be clean. If you use too much in soft water,
glassware will etch.
Soft to Medium Water (0-6 grains per U.S. gallon)
[typical water softener water and some city water]
Medium to Hard Water (7-12 grains per U.S. gallon)
[well water and some city water]
• Depending on your water hardness, fill the Main Wash section
of the dispenser as shown. Fillthe Pre-Wash section to the
level shown, if needed.
NOTE: Fill amounts shown
are for standard powdered
detergent. Follow
instructions on the package
when using other dishwasher
detergent.
Soft Water
Hard Water
Main Wash
J HardWater
SoftWater
Pre-Wash
Add Rinse Aid
Your dishwasher is designed to use rinse aid for good drying
performance. Without rinse aid your dishes and dishwasher
interior will have excessive moisture. The heat dry option will
not perform as well without rinse aid.
Rinse aid keeps water from forming droplets that can
dry as spots or streaks. They also improve drying by
allowing water to drain off of the dishes after the final
rinse.
Rinse aid helps to reduce excess moisture on the dish
racks and interior of your dishwasher.
Check the rinse aid indicator. Add rinse aid when indicator
drops to "Add" level.
To add rinse aid, turn the dispenser cap
to "Refill" and lift off. Pour rinse aid into
the opening until the indicator level is at
"Full." Replace the dispenser cap and
turn to "Lock." Make sure cap is fully
locked.
Refill__
Lock
Full
Add
Select a Cycle (cycles vary by model)
See "Cycle and Option Descriptions" charts inthe following
section.
Heavier cycles and options affect cycle length. Some cycles and
options will take up to 31/2hours to complete.
Select Options (options vary by model)
See "Cycle and Option Descriptions" charts inthe following
section.
You can customize your cycles by pressing the options desired.
turn to lock
NOTE: For most water conditions, the
factory setting of 2 will give good
results. If you have hard water or notice
rings or spots, try a higher setting. Turn
the arrow adjuster inside the dispenser
by either using your fingers or inserting
a flat-blade screwdriver into the center
of the arrow and turning.
Start or Resume a Cycle
• Run hot water at the sink nearest your dishwasher until the
water is hot. Turn off water.
Push door firmly closed. The door latches
automatically. Select the wash cycle and options
desired OR press START/RESUME to repeat the same
cycle and options as in the previous wash cycle.
You can add an item anytime before the main wash starts.
Open the door slowly and add the item. Close the door firmly.
Press START/RESUME.
kJ .....................Ii................
This information covers several different models. Your dishwasher may not have all the cycles and options described.
DESCRIPTIONS
Cycle Cycle + Options *Maximum
Minimum Minimum
WASH TIME (HH:MM)
• Washing
• Drying
• Clean
• Sanitized
Use for loads with normal
amounts of food soil.
The energy-usage label is based on this
cycle. During the wash, the wash action
1:11 1:41 3:30
will repeatedly pause for several seconds.
Use to quickly wash
This cycle does not dry.
0:30 none none
prerinsed glasses or dish
loads.
You can customize your cycle by selecting an option.
See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change
an option anytime before the selected option begins.
*Maximum wash times depend on water temperature, heavy soil condition, dish load size and options selected.
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Pans, casseroles, etc. with Activates the PROSCRUB ®spray jets and provides
tough food soil. intensified water spray to the back of the lower level rack.
Loads containing tough,
baked-on food.
To run your dish washer at Delays the start of a cycle up to 4 hours.
a later time or during off- Select a wash cycle and options. Press 4 Hour Delay. Press
peak hours. START/RESUME. Close the door firmly.
May add heat and time to the cycle.
Increases the target water temperature during the wash
portions of the cycle.
Adds heat, wash time and water to the cycle.
Heavy Duty or Normal
cycle
Heavy Duty or Normal
cycles
All cycles, except Rinse
Only
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the
cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle
will automatically compensate by adding time, heat and water as needed.
CONTROL PURPOSE COMMENTS
To cancel wash
cycle
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
drain completely.
Your KitchenAid dishwasher may have some or all of these features.
PROSCRUB _ Wash Area
The PROSCRUB ®wash area is located at
the back of the lower level rack.
NOTE: You must select the PROSCRUB ®
wash option to use this feature. Make sure
items do not interfere with the water feed
tube, spray arms, or PROSCRUB ®spray
jets.
• Load pans, casserole dishes, etc. in the
back of the lower dish rack with the
soiled surfaces facing the PROSCRUB ®
spray jets.
• Only one row of items may face the PROSCRUB ®spray jets.
Stacking, overlapping or nesting items will keep the
PROSCRUB ®spray jets from contacting all of the surfaces.
Removable Lower Level Rack Inserts
IMPORTANT: This insert must be used when using the
PROSCRUB®wash option. All insert tines should be in the up
position, and the dish should be placed in the open, middle section
facing the PROSCRUB®spray jets.
The double and single removable rack inserts allow you to adjust
the rack for the type of load you are washing. This is useful when
washing a variety of dishes, pots and pans, or roasters.
•.....
CULINARY CADDY _ Utensil Basket
Use the utensil basket to hold specialty
cooking utensils (serving spoons,
spatulas, and similar items), or overflow
silverware items.
The basket hangs on the bottom rack in
the right-hand corner. Load the basket
while it is on the bottom rack or remove
the basket for loading on a counter or
table.
NOTE: Spin the spray arms. Be sure
items in the basket do not stop the
rotation of the spray arms.
SURE-HOLD ®Small Items Mesh Pouch
the bottom rack. Use it to hold i
small items that could otherwise
"fly" around inside the dishwasher
during a cycle.
Thspouchhangsonthefrontof I
Adjustable 2-Position Mid Level Rack
After removing the culinary tool rack, you can raise or lower the mid
level rack to fit tall items in either the mid level or bottom rack.
Adjusters are located on each side of the mid level rack. Each
adjuster has 2 preset positions. The high and low positions are
marked on the adjuster.
IMPORTANT: If using the culinary tool baskets inthe Down
position, the mid level rack must also be in the lowest position.
To raise the rack, press both rack adjusters and lift the rack until it
is in the Up position and level.
To lower the rack,
press both rack
adjusters and slide the
rack back to its lower
position.
NOTE: The mid level
rack must be level.
A. Double rack insert
B. Single rack insert
To install lower level inserts:
NOTE: It will be easier to install the inserts if you remove the
silverware basket from the rack.
1. Place the double insert end legs under the 3rd wire from the
right and single insert legs under the 2nd wire from the right.
IMPORTANT: Make sure that the curved wires, on the bottom
of the insert, fit over the wires inthe bottom of the rack.
2. Push down on insert until handle fits against outer rack edge.
3. When center tab under handle locks in under the middle side
rack wire, the insert is in place.
To remove lower level inserts:
Pull handle out to the right and lift up to release and lift insert out of
rack.
SURE-HOLD ®Cup and Stemware Holder
Fold down the extra shelf on the left-hand or right-hand side of the
mid level rack to hold additional cups, stemware or long items such
as utensils and spatulas.
NOTE: Remove the culinary tool basket(s) when washing tall
stemware or other tall items in the mid level rack.
FLEXI-FOLD DOWN TM Flexible Tines
The row of tines on the left-hand and
right-hand sides of the mid-level rack
can be adjusted to make room for a
variety of dishes.
To adjust the fold-down tines:
1. Grasp the tip of the tine that is in
the tine holder.
2. Gently push the tine out of the
holder.
3. Lay the tines down, toward the
center of the rack.
SURE-HOLD ® Light Item Clips
The light item clips hold lightweight plastic items
such as cups, lids, or bowls in place during
washing.
To move a clip:
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Removable Mid Level Rack Inserts
Your dishwasher has two removable mid level rack inserts which
allow you to adjust the rack to the type of load you are washing.
Removable Mid Level and Culinary Tool Racks
The removable racks allow you to
wash larger items such as stock
pots, roasters, and cookie sheets
in the lower level rack.
IMPORTANT: Remove dishes
prior to removing the mid level
rack from dishwasher.
To remove the rack:
1. To access track stops, pull the
rack forward until it stops and
clicks into place.
2. To open track stops, flip the track stop to the outside of the
track.
3. After opening both track stops, slide front wheels up and out
of the slot in track. Continue to pull rack forward in track and
slide the back wheels up and out of the track.
4. Close track stops.
5. Slide rack tracks back into dishwasher.
To replace the rack:
1. Gently pull rack tracks forward in dishwasher until they stop
and click into place.
2. To open track stops, flip the track stop to the outside of the
track.
3. Place the back rack rollers on each side of the rack into the
track slot and roll the rack back into the tracks.
4. Insert front rack rollers on each side of the rack into the rack
slots.
5. Close track stops on both sides of rack and slide rack back
into dishwasher.
A.Trackstop
B.Track
B
A. Removable rack inserts
B. Insert holding clips
To install rack inserts:
Place the insert end legs under the front or back rack wire as
shown below. Push down on the center insert wire until it slides
into the holding clip on either side of the center in the bottom of the
rack.
A. Lift removable insert wire to remove from holding clips
B. Holding clips
To remove inserts:
Lift up on the insert wire located toward the center of the rack to
release the insert from the holding clips. Lift insert out of rack.
Culinary Tool Rack
The culinary tool rack is designed with 2 movable baskets to hold
extra silverware, knives and cooking utensils.
Install the baskets in this up position when you have extra
silverware and flatware to wash.
Up position
Install the baskets in this down position when you have extra
silverware, knives, or utensils requiring more room to wash.
IMPORTANT: When you are using the culinary tool baskets in the
down position, the mid level rack must also be in the lowest
position.
Down position