ThankyouforChoosingKitchenAid®Appliances.
Weholdourcompanytothehighestqualitystandardsanditisimportanttousthatyouhaveapositiveexperienceowninga
KitchenAid®product.
Foryourconvenience,wehaveprovidedaneasytofollowUserInstructionBook.Theseinstructionsincludea"Troubleshooting"
sectiontohelpyouthroughanyproblemsyoumayencounter.
Foradditionalinformation,youcanvisittheFrequentlyAskedQuestions(FAQs)sectionofourwebsiteatwww.kitchenaid.com.If
youneedfurtherassistanceusingyourKitchenAiddishwasher,pleasecontactusat1-800-422-1230.InCanada:visit
www.kitchenaid.caorcall1-800-807-6777.
Haveyourcompletemodelandserialnumberready.Youcanfindyourmodelandserialnumberonthelabellocatednearthedoor
ontheright-handorleft-handsideofthedishwasherinterior.
Paraobteneraccesoa"lnstruccionesparaelusuariodelalavavajillas"enespa_ol,oparaobtenerinformaci6nadicionalacercade
suproducto,visite:www.kitchenaid.com
TengalistosunOmerocompletodemodeloydeserie.PuedeencontrarsunOmerodemodeloydeserieenlaetiquetaubicada
cercadelapuerta,alladoderechooizquierdodelinteriordelalavavajillas.
Table of Contents
DISHWASHER SAFETY ............................................................. 1
QUICK STEPS ............................................................................ 3
DISHWASHER USE .................................................................... 3
CYCLE AND OPTION DESCRIPTIONS .................................... 4
DISHWASHER FEATURES ........................................................ 6
FILTRATION SYSTEM ............................................................... 7
DISHWASHER CARE ................................................................. 8
TROUBLESHOOTING ................................................................ 9
WAR RANTY .............................................................................. 11
Your safety and the safety of others are very important.
We haveprovided manyimportant safety messagesinthis manualand on your appliance. Always read and obeyall safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
W10208709A
iMPORTANT SAFETY iNSTRUCTiONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
[] Read all instructions before using the dishwasher. [] Do not tamper with controls.
[] Use the dishwasher only for its intended function.
[] Use only detergents or rinse agents recommended for use in
a dishwasher, and keep them out of the reach of children.
[] When loading items to be washed:
1) Locate sharp items so that they are not likely to damage
the door seal; and
2) Load sharp knives with the handles up to reduce the risk
of cut-type injuries.
[] Do not wash plastic items unless they are marked
"dishwasher safe" or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.
[] Do not touch the heating element during or immediately after
use.
[] Do not operate the dishwasher unless all enclosure panels
are properly in place.
[] Do not abuse, sit on, or stand on the door, lid, or dish racks
of the dishwasher.
[] To reduce the risk of injury, do not allow children to play in
or on the dishwasher.
[] Under certain conditions, hydrogen gas may be produced in
a hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the dishwasher turn on all hot water faucets and let the
water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
[] Remove the door or lid to the washing compartment
when removing an old dishwasher from service or
discarding it.
SAVE THESE iNSTRUCTiONS
GROUNDING iNSTRUCTiONS
For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for
electric current. The dishwasher is equipped with a cord
having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with all local
codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
SAVE THESE iNSTRUCTiONS
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
Check with a qualified electrician or service representative
if you are in doubt whether the dishwasher is properly
grounded. Do not modify the plug provided with the
dishwasher; if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
[]
For a permanently connected dishwasher:
The dishwasher must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the dishwasher.
Tip Over Hazard
Prepare and load _
dishwasher. _Y
Select a cycle and option.
2
for cleaning and
rinse aid for
Add detergent _ _
drying. .._il.;_i!}_.._;"
Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks and other
hard items from the dishes. Remove labels from containers before
washing.
'/: I/
Upper rack
Lower rack
Make sure nothing keeps spray arm(s) from
spinning freely. It is important for the water
spray to reach all soiled surfaces.
• Make sure that when the dishwasher door is closed no items
are blocking the detergent dispenser.
• Items should be loaded with soiled surfaces facing down and
inward to the spray as shown. This will improve cleaning and
drying results.
• Avoid overlapping items like bowls or plates that may trap food.
• Place plastics, small plates and glasses in the upper rack.
Wash only plastic items marked "dishwasher safe."
• To avoid thumping/clattering noises during operation: Load
dishes so they do not touch one another. Make sure lightweight
load items are secured in the racks.
When loading silverware, always place sharp
items pointing down and avoid "nesting" as
shown.
Start dishwasher.
NOTE: Ifthe START/RESUME button is
located on the top of door, push door firmly
closed within 3 seconds of pressing
START/RESU ME.
STEP2
Add Detergent
NOTE: If you do not plan to run a wash cycle soon, run a rinse
cycle. Do not use detergent.
• Use automatic dishwasher detergent only. Add powder, liquid
or tablet detergent just before starting a cycle.
• Fresh automatic A
dishwasher detergent
results in better
cleaning. Store tightly
closed detergent B
container in a cool, dry
place.
A. Cover latch
B. Main Wash section
C. Pre- Wash section
• The amount of detergent to use depends on:
How much soil remains on the items - Heavily soiled loads
require more detergent.
The hardness of the water - If you use too little in hard water,
dishes won't be clean. If you use too much in soft water,
glassware will etch.
Soft to Medium Water (0-6 grains per U.S. gallon)
[typical water softener water and some city water]
Medium to Hard Water (7-12 grains per U.S. gallon)
[well water and some city water]
• Depending on your water hardness, fill the Main Wash section
of the dispenser as shown. Fill the Pre-Wash section to the
level shown, if needed.
NOTE: Fill amounts shown
are for standard powdered
detergent. Follow
instructions on the package
when using other dishwasher
X Hard Wat I
MainWash
HardWater
SoftWater
Pre-Wash
detergent.
Add Rinse Aid
Your dishwasher is designed to use rinse aid for good drying
performance. Without rinse aid your dishes and dishwasher
interior will have excessive moisture. The heat dry option will
not perform as well without rinse aid.
Rinseaidkeepswaterfromformingdropletsthatcan
dryasspotsorstreaks.Theyalsoimprovedryingby
allowingwatertodrainoffofthedishesafterthefinal
rinse.
Rinseaidhelpstoreduceexcessmoistureonthedish
racksandinteriorofyourdishwasher.
• Check the rinse aid indicator. Add rinse aid when indicator
drops to "Add" level.
To add rinse aid, turn the dispenser cap
to "Refill" and lift off. Pour rinse aid into
the opening until the indicator level is at
"Full." Replace the dispenser cap and
turn to "Lock." Make sure cap is fully
locked.
NOTE: For most water conditions, the
factory setting of 2 will give good
results. If you have hard water or notice
rings or spots, try a higher setting. Turn
the arrow adjuster inside the dispenser
by either using your fingers or inserting
a flat-blade screwdriver into the center
of the arrow and turning.
Refill
Lock
turn to lock
Full
Add
STEP 3
Select a Cycle (cycles vary by model)
See "Cycle and Option Descriptions" charts in the following
section.
Heavier cycles and options affect cycle length. Some cycles and
options will take up to 31/2hours to complete.
Select Options (options vary by model)
See "Cycle and Option Descriptions" charts in the following
section.
You can customize your cycles by pressing the options desired.
STEP 4
Start or Resume a Cycle
Run hot water at the sink nearest your dishwasher until the
water is hot. Turn off water.
Push door firmly closed. The door latches
automatically. Select the wash cycle and options
desired OR press START/RESUME to repeat the same
cycle and options as in the previous wash cycle.
You can add an item anytime before the main wash starts.
Open the door slowly and add the item. Close the door firmly.
Press START/RESUME.
O Washing
This information covers several different models. Your dishwasher may not have all of the cycles and options described.
CYCLES DISH LOAD TYPES DESCRIPTIONS WASH TIME (HH:MM)
Cycle Cycle + Options *Maximum
Minimum Minimum
SQ_''v'''''''*', use for hard-t0_clean; heavily During the Wash;the Wash action W ii 1:55 2i25 3:23
1
Heavy SO ed pots, pans, cassero es, repeated y pause for severa seconds.
Duty
.............Z........J and regular tableware.
Use for loads with normal The energy-usage label is based on this 1:25 1:50 3:13
amounts of food soil. cycle. During the wash, the wash action
will repeatedly pause for several seconds.
When you need fast results,
the 1 Hour Wash will clean
your dishes using slightly
This cycle does not dry. For improved
drying, select the Heated Dry option,
adding 1/2hour to the wash cycle.
0:58 0:88 0:58
more water and energy.
Drying
Clean
Sanitized
_0":':"""'"' Use for rinsing dishes, This cycle does not dry. 0:15 none none
Rinse glasses, and silverware that DO not use detement
Only _9
will not be washed right awayl :
Youcancustomizeyourcyclebyselectinganoption.
Seeoptionselections.Ifyouchangeyourmind,presstheoptionagaintoturnofftheoption,orselectadifferentoption.Youcanchange
anoptionanytimebeforetheselectedoptionbegins.
*Maximumwashtimesdependonwatertemperature,heavysoilcondition,dishloadsizeandoptionsselected.
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
I_ ............................_'_ Pansl casseiOles, etcl With ACtivates the PROSCRUB® spraY jets and provides Heavy Duty or Normal
ProScrub tough food soil, intensified water spray to the back of the !ower !evel rack. cycle
!_...............................J May add heat and time to the cycle.
To sanitize your dishes and
glassware in accordance
with NSF/ANSI Standard
184 for Residential
Dishwashers.
......................._ Loads containing tough increases the target water temperature during the Wash HeaVY Duty or Normai
Hi-Temp baked,on food. portions of the cyclei cycles
Scrub
" ..............................._ Adds heat, wash time and water to the cyc!e,
For best drying results, dry
dishes with heat.
jO_........................To run your dishWasher at Delays the start of a cycle up to 4 hoUrsl All CYc!esl except Rinse
4Hour a later time or dunng off On y
Delay , ," .... select a Wash cYcle and options: Press 4 HoUr De!aYI Press ........
j peak nours
_,,,....................... " START/RESUME. Close the door firmly.
Control Lock To avoid unintended use of To turn on Lock, press and hold Heat Dry for at least Anytime
your dishwasher, or cycle 4 seconds.
and option changes during
a cycle.
Raises the water temperature in the final rinse to
approximately 155°F (68°C). This high temperature rinse
sanitizes your dishes and glassware in accordance with
NSF/ANSI Standard 184 for Residential Dishwashers.
Certified residential dishwashers are not intended for
licensed food establishments.
The Sanitize or Sani Rinse option adds heat and time to the
cycle.
Turn OFF when loads contain plastic dinnerware that may be
sensitive to high temperatures.
This option with the use of rinse aid will provide the best
drying performance.
To turn off Lock, press and hold Heat Dry for at least
4 seconds.
When Control Lock is lit, all buttons are disabled. If you press
any pad while your dishwasher is locked, the light flashes
3 times. The dishwasher door can be opened while the
controls are locked.
Normal cycle. Heavy
Duty cycle automatically
uses Sani Rinse. Only
these sanitization cycles
have been designed to
meet the NSF/ANSI
requirements.
All cycles, except Rinse
Only. Automatic with all
wash cycles unless you
turn it off.
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the
cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle
will automatically compensate by adding time, heat and water as needed.
CONTROL PURPOSE COMMENTS
To start or resume a If the door is OPened during a cYCe orthe power is interrupted, the START/RESUME indicator
wash cycle flashes. The cYCle will not resume until the door is closed and START/RESUME is pressed,
NOTE: If the START/RESUME button is located ontop of door, push door firmly closed Within
3 seconds of pressing START/RESUME,
To cancel wash
cycle
® Was,,ng TOfollow the The Clean indicator glows When a Cycle is finished.
O Dry ng progress of your
• fYoUseecttheSan Rinse oPt on; when the san ainsecYceisfinshed, theSantzed ndicator
Clean d snwasner cyc e
<a_t_ed glows. If your dishwasher did not proper y sanitize your dishes, the light f ashes at the end of the
. v: cycle This can happen if the cycle is interrupted, or the water could not be heated to the required
.................. temperature. The light goes off when you open and close the door or press CANCELI
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
drain completely.
Your KitchenAid dishwasher may have some or all of these features.
PROSCRUB _ Wash Area
The PROSCRUB ®wash area is located at
the back of the lower level rack.
NOTE: You must select the PROSCRUB ®
wash option to use this feature. Make sure
items do not interfere with the water feed
tube, spray arms, or PROSCRUB ®spray
jets.
• Load pans, casserole dishes, etc. in the
back of the lower dish rack with the
soiled surfaces facing the
PROSCRUB ®spray jets.
• Only one row of items may face the PROSCRUB ®spray jets.
Stacking, overlapping or nesting items will keep the
PROSCRUB ®spray jets from contacting all of the surfaces.
CULINARY CADDY ®Utensil Basket
Use the utensil basket to hold specialty
cooking utensils (serving spoons,
spatulas, and similar items), or overflow
silverware items.
The basket hangs on the bottom rack in
the right-hand corner. Load the basket
while it is on the bottom rack or remove
the basket for loading on a counter or
table.
NOTE: Spin the spray arms. Be sure
items in the basket do not stop the
rotation of the spray arms.
SURE-HOLD ®Small Items Mesh Pouch
This pouch hangs on the front of
the bottom rack. Use it to hold
small items that could otherwise
"fly" around inside the dishwasher
during a cycle.
SURE-HOLD ®Cup and Stemware Holder
Fold down the extra shelf on the left-hand or right-hand side of the
mid level rack to hold additional cups, stemware or long items such
as utensils and spatulas.
NOTE: Remove the culinary tool basket(s) when washing tall
stemware or other tall items in the mid level rack.
FLEXI-FOLD DOWN TM Flexible Tines
The row of tines on the left-hand and
right-hand sides of the mid-level rack
can be adjusted to make room for a
variety of dishes.
To adjust the fold-down tines:
1. Grasp the tip of the tine that is in
the tine holder.
2. Gently push the tine out of the
holder.
3. Lay the tines down, toward the
center of the rack.
SURE-HOLD ®Light Item Clips
The light item clips hold lightweight plastic items
such as cups, lids, or bowls in place during
washing.
To move a clip:
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Adjustable 2-Position Mid Level Rack
After removing the culinary tool rack, you can raise or lower the mid
level rack to fit tall items in either the mid level or bottom rack.
Adjusters are located on each side of the mid level rack. Each
adjuster has 2 preset positions. The high and low positions are
marked on the adjuster.
IMPORTANT: If using the culinary tool baskets in the Down
position, the mid level rack must also be in the lowest position.
To raise the rack, press both rack adjusters and lift the rack until it
is in the Up position and level.
To lower the rack,
press both rack
adjusters and slide the
rack back to its lower
position.
NOTE: The mid level
rack must be level.
Removable Mid Level and Culinary Tool Racks
The removable racks allow you to
wash larger items such as stock
pots, roasters, and cookie sheets
in the lower level rack.
IMPORTANT: Remove dishes
prior to removing the mid level
rack from dishwasher.
To remove the rack:
1. To access track stops, pull the
rack forward until it stops and
clicks into place.
2. To open track stops, flip the track stop to the outside of the
track.
3. After opening both track stops, slide front wheels up and out
of the slot in track. Continue to pull rack forward in track and
slide the back wheels up and out of the track.
4. Close track stops.
5. Slide rack tracks back into dishwasher.
A.Trackstop
B.Track
Toreplacetherack:
1. Gentlypullracktracksforwardindishwasheruntiltheystop
andclickintoplace.
2. Toopentrackstops,flipthetrackstoptotheoutsideofthe
track.
3. Placethebackrackrollersoneachsideoftherackintothe
trackslotandrolltherackbackintothetracks.
4. Insertfrontrackrollersoneachsideoftherackintotherack
slots.
5. Closetrackstopsonbothsidesofrackandsliderackback
intodishwasher.
CulinaryToolRack
Theculinarytoolrackisdesignedwith2movablebasketstohold
extrasilverware,knivesandcookingutensils.
Installthebasketsinthisuppositionwhenyouhaveextra
silverwareandflatwaretowash.
IMPORTANT:Whenyouareusingtheculinarytoolbasketsinthe
downposition,themidlevelrackmustalsobeinthelowest
position.
Downposition
Remove the front basket in the down position, when you are using
the cup shelves or other tall items in the mid level rack for more
room.
Up position
Install the baskets in this down position when you have extra
silverware, knives, or utensils requiring more room to wash.
Your dishwasher has the latest technology in dishwasher filtration. This triple filtration system minimizes sound and optimizes water and
energy conservation while providing superior cleaning performance. Throughout the life of your dishwasher, the filter will require
maintenance to sustain peak cleaning performance.
The triple filter system consists of 2 parts, an upper filter
assembly and a lower filter.
• The upper filter assembly keeps oversized items and
foreign objects, along with very fine food particles, out of
the pump.
• The lower filter keeps food from being recirculated onto
your dishware.
The filters may need to be cleaned when:
• Visible objects or soils are on the Upper Filter Assembly.
• There is degradation in cleaning performance (that is,
soils still present on dishes).
• Dishes feel gritty to the touch.
It is very easy to remove and maintain the filters. The chart
below shows the recommended cleaning frequency.
Locadng
Tabs
Lower Filter
Number of Loads If you wash If you scrape and rinse If you only scrape
Per Week before loading before loading before loading*
1-3 Once per year ' Once per year Twice per year ........................................
4-7 once per year Once per year Twice per year
once per year .............................Twice per year .............................Eve_ three months Every two Weeks
13-14 Once per year Twice per year Every three months Once per week
*Manufacturer's recommendation: This practice will conserve the water and energy that you would have used to prepare your dishes. This
will also save you time and effort.
If you do not scrape or rinse
before loading
Every two months
Once per month
Very Hard Water
Ifyou have hard water (above 15 grains), clean your filter at least
once per month. Building up of white residue on your dishwasher
indicates hard water. For tips on removing spots and stains, see
"Troubleshooting" section.
Filter Removal Instructions
1. Turn the Upper Filter
Assembly 1¼turn
counterclockwise and lift
2. Grasp the Lower Filter in
the circular opening, lift
slightly, and pull forward to
out.
remove. _ _
3. Clean the filters as shown "_f'._
below.
To remove Upper Filter Assembly
tab
Cleaning Instructions
IMPORTANT: Do not use wire brush, scouring pad, etc. as they
may damage the filters.
Rinse filter under running water until most soils are removed. If you
have hard-to-remove soils or calcium deposits from hard water, a
soft brush may be required.
Filter Reinstallation Instructions
1=
Noting the previous
illustrations, place the
Lower Filter under the
Locating Tabs in the _/
bottom of the dishwasher
so the round opening for
the Upper Filter Assembly
lines up with the round
opening in the bottom of £/_Ii_,!
the tub.
To replace Upper Filter Assembly
2=
Insert the Upper Filter Assembly into the circular opening in
the Lower Filter.
3.
Slowly rotate the filter clockwise until it drops into place.
Continue to rotate until the filter is locked into place. If the
filter is not fully seated (still turns freely), continue to turn
the filter clockwise until it drops and locks into place.
NOTE: The Upper Filter Assembly arrow does not have to
align with the arrow in the Lower Filter as long as the filter is
locked.
IMPORTANT: To avoid damage to dishwasher, do not operate your
dishwasher without the filters properly installed. Be sure the Lower
Filter is securely in place and the Upper Filter Assembly is locked
into place. If the Upper Filter Assembly turns freely, it is not locked
into place.
rtab
J
Cleaning the Dishwasher
Clean the exterior of the dishwasher with a soft, damp cloth and
mild detergent. If your dishwasher has a stainless steel exterior, a
stainless steel cleaner is recommended.
Clean the interior of the dishwasher, with a paste of powdered
dishwasher detergent and water or use liquid dishwasher detergent
on a damp sponge to clean the cooled-down interior.
A white vinegar rinse may remove white spots and film. Vinegar is
an acid, and using it too often could damage your dishwasher.
Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe
measuring cup on the bottom rack. Run the dishwasher through a
complete washing cycle using an air-dry or an energy-saving dry
option. Do not use detergent. Vinegar will mix with the wash water.
If you have a drain air gap,
check and clean it if the
dishwasher isn't draining
well.
Storing the Dishwasher
If you will not be using the dishwasher during the summer months,
turn off the water and power supply to the dishwasher. In the
winter, if the dishwasher could be exposed to near freezing
temperatures or is left in a seasonal dwelling such as a second
home or vacation home, avoid water damage by having your
dishwasher winterized by authorized service personnel.