KitchenAid KUDH03DTBL2, KUDH03DTSS2, KUDD03STWH0, KUDD03STSS0, KUDD03STBL0 Installation Guide
...
I_itchen_kid _
INSTALLATION INSTRUCTIONS
DRAWER DISHWASHER
P
INSTRUCCIONES DE INSTALACION
DE LA LAVAVAJILLAS DE CAJON
INSTRUCTIONS D'INSTALLATION
LAVE-VAISSELLE A DOUBLE TIROIR
Table of Contents/Jndice/Table des matieres .................................................................. 2
iMPORTANT:
Save for local electrical inspector's use.
Installer: Leave installation instructions with the homeowner.
Homeowner: Keep installation instructions for future reference.
IMPORTANTE:
Guarde para tenerlas a disposici6n del inspector de electricidad local.
Instalador: Deje las instrucciones de instalaci6n con el propietario.
Propietario: Conserve las instrucciones de instalaci6n para referencia futura.
iMPORTANT :
Conserver pour consultation par I'inspecteur local des installations 61ectriques.
Installateur : Remettre les instructions d'installation au propri6taire.
Propri6taire : Conserver les instructions d'installation pour r6f@ence ult@ieure.
W10216167A
TABLE OF CONTENTS
DISHWASHER SAFETY ........................................................................... 3
INSTALLATION REQUIREMENTS ......................................................... 4
Electrical Requirements ........................................................................ 6
Drain Requirements .............................................................................. 6
INSTALLATION INSTRUCTIONS ........................................................... 7
Unpack Dish Drawer ............................................................................. 7
Prepare Cabinet Opening ..................................................................... 7
PREPARE DISHWASH ER ....................................................................... 8
Route Electrical Wiring .......................................................................... 9
Route Water Supply Line and Drain Hose ............................................ 9
p
INDICE
SEGURIDAD DE LA LAVAVAJILLAS ................................................... 18
REQUlSITOS DE INSTALACION .......................................................... 19
Requisitos del suministro de agua ..................................................... 20
Requisitos electricos ........................................................................... 21
Requisitos de desagQe ....................................................................... 22
INSTRUCCIONES DE INSTALACION .................................................. 22
Desempaque el caj6n para platos ...................................................... 22
Prepare la abertura del armario .......................................................... 22
PREPARE LA LAVAVAJILLAS .............................................................. 23
Dirija el cableado electrico .................................................................. 24
Dirija la linea de suministro de agua y la manguera de desagQe ....... 25
Connect Water Supply Line and Drain Hoses ................................... 10
Make Electrical Connection ................................................................ 12
Install Trim Pieces and Level Dishwasher .......................................... 13
Secure the Dish Drawers .................................................................... 14
Complete Installation .......................................................................... 15
CUSTOM PANEL INSTALLATION INSTRUCTIONS .......................... 16
Preparing Custom Panels ................................................................... 16
Install Panel Fasteners ........................................................................ 17
Mount the Custom Panel .................................................................... 17
Conecte la linea de suministro de agua y las
mangueras de desagOe ...................................................................... 26
Conexi6n del suministro el_ctrico ...................................................... 27
Instale las piezas del marco y nivele la lavavajillas ............................ 28
C6mo asegurar los cajones de lavado ............................................... 30
Complete la instalaci6n ...................................................................... 31
INSTRUCCIONES DE INSTALACION DE LOS
PANELES A LA MEDIDA ....................................................................... 32
Paneles de los cajones a la medida ................................................... 32
Preparaci6n de los paneles a la medida ............................................ 32
C6mo instalar los sujetadores del panel ............................................ 33
C6mo montar el panel a la medida .................................................... 33
TABLE DES MATERES
SleCURITle DU LAVE-VAISSELLE ........................................................ 34
EXIGENCES D'INSTALLATION ............................................................ 35
Exigences d'emplacement ................................................................. 36
Specifications de I'alimentation en eau.............................................. 36
Specifications _lectriques ................................................................... 37
Specifications de la vidange ............................................................... 37
INSTRUCTIONS D'INSTALLATION ..................................................... 38
Deballer le tiroir & vaisselle ................................................................. 38
Amenagement de la cavit6 d'encastrement du placard .................... 38
PRlePARATION DU
LAVE-VAISSELLE .................................................................................. 39
Acheminement du c&blage electrique ................................................ 40
Acheminement du conduit d'alimentation
en eau et du tuyau de vidange ........................................................... 41
Raccordement du conduit d'alimentation en
eau et des tuyaux de vidange ............................................................ 42
Raccordement electrique ................................................................... 43
Installation des garnitures et reglage de
I'aplomb du lave-vaisselle .................................................................. 44
Fixation des tiroirs &lave-vaisselle ..................................................... 46
Achever I'installation ........................................................................... 47
INSTRUCTIONS D'INSTALLATION DU
PANNEAU PERSONNALISleS .............................................................. 47
Preparation des panneaux personnalises .......................................... 48
Installation des dispositifs de fixation de panneau ............................ 48
Montage du panneau personnalise ........................................................ 48
2
DISHWASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
m Read all instructions before using the dishwasher.
m Use the dishwasher only for its intended function.
m Use only detergents or rinse agents recommended for use
in a dishwasher, and keep them out of the reach of children.
m When loading items to be washed:
1) Locate sharp items so that they are not likely to damage
the door seal; and
2) Load sharp knives with the handles up to reduce the risk
of cut-type injuries.
m Do not wash plastic items unless they are marked
"dishwasher safe" or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.
m Do not touch the heating element during or immediately
after use.
m Do not operate the dishwasher unless all enclosure panels
are properly in place.
SAVE THESE INSTRUCTIONS
Do not open dishwasher drawer until inside cabinet opening.
Doing so can result in death or serious injury.
m Do not tamper with controls.
m Do not abuse, sit on, or stand on the door, lid, or dish racks
of the dishwasher.
m To reduce the risk of injury, do not allow children to play in
or on the dishwasher.
m Under certain conditions, hydrogen gas may be produced in
a hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the dishwasher turn on all hot water faucets and let the
water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
m Remove the door or lid to the washing compartment
when removing an old dishwasher from service or
discarding it.
Tip Over Hazard
You need to:
• Slowly open dishwasher drawer while someone grasps the
rear of the dishwasher. Remove shipping materials. Close
dishwasher drawer. Latch the dishwasher drawer shut.
• Observe all governing codes and ordinances.
• Install this dishwasher as specified in these instructions.
• Have everything you need to properly install dishwasher.
• Contact a qualified installer to ensure that dishwasher is
installed to meet all electrical and plumbing national and local
codes and ordinances.
INSTALLATION REQUIREMENTS
h ¸_ ai_d ¸_¸_........._.....
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
• Pliers
• Phillips screwdriver
• Flat-blade screwdriver
• ¾e" and 1¼,,nut drivers or
hex sockets
• Measuring tape or ruler
• 1Y2" hole saw bit
Parts needed
• 10" adjustable wrench
• Utility knife
• Level
• Electric drill
• V8" drill bit
• Security T-20 TORX®t
driver (if installing custom
front panels)
Parts Supplied
Check that all parts are included.
C D
G
D
E
A. 72" (182.9 cm) flexible water supply line
B. Zip tie
C.Appropriate sized UL listed wire connectors (2)
D. Handle (if installing custom front panels)
E. Custom panel (if instalfing custom front panels)
1-®TORX is a registered trademark of Acument Intellectual Properties, LLC
IMPORTANT: Observe all governing codes and ordinances.
Failure to meet codes and ordinances could lead to fire or
electrical shock.
Proper installation is your responsibility.
• Contact a qualified installer to ensure that the dishwasher is
installed to meet all electrical and plumbing national and local
codes and ordinances.
• Install the dishwasher as specified in these instructions.
K
A. _" UL fisted strain refief
B. 1.25" hose clamp
C. Mounting bracket screws (8)
D. Unit mounting screws (4)
E. Ydrain connector
F. Mounting brackets (4)
G. Drain connector spring
clamps (2)
H. Trim strips (2)
I. Toe kick brackets (2)
J. Toe kick bracket screws (2)
K. Toe kick trim
L. Panel fasteners (on some
models [2])
M. TORX®_screws (on some
models [10])
......... [i!*..................................
• Have everything you need to properly install dishwasher.
• Keep the dishwasher and water lines leading to dishwasher
from freezing. Damage from freezing is not covered by the
warranty.
• This dishwasher is manufactured for indoor use only.
• Install and level dishwasher on a floor that will hold the weight,
and in an area suitable for its size and use.
Product Dimensions
191/4" 11/2"
(48.9 cm) (3.75 cm)
Installation Clearances
Cutout dimensions
231/2''
"(59.7 cm)
ii
cm)
33¾"
(85.7 cm)
Preferred utililtyarea
A. Choose left-hand or fight-hand drain and water connection route.
B. Choose left-hand or fight-hand electric connection route.
NOTE: All holes should be drilled at 11/2"(3.8 cm) diameter.
A hot water line with 20-120 psi (138-862 kPa) water pressure. • Flexible stainless steel braided fill line (1/2" minimum plastic
120°F (49°C) water temperature at dishwasher, tubing is not recommended).
_e q _:u:£e:+sse:+:l_5
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
GROUNDING iNSTRUCTiONS
m
For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the
risk of electric shock by providing a path of least
resistance for electric current. The dishwasher is
equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is installed and
grounded in accordance with all local codes and
ordinances.
WARNING: Improper connection of the
equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or
service representative if you are in doubt whether the
dishwasher is properly grounded. Do not modify the
plug provided with the dishwasher; if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
m
For a permanently connected dishwasher:
The dishwasher must be connected to a grounded
metal, permanent wiring system, or an equipment-
grounding conductor must be run with the circuit
conductors and connected to the equipment-
grounding terminal or lead on the dishwasher.
If direct wiring dishwasher:
• Use flexible, armored or nonmetallic sheathed, copper wire
with grounding wire that meets the wiring requirements for
your home and local codes and ordinances.
Use strain relief method provided with house wiring junction
box or install a UL-listed/CSA-certified clamp connector to the
house wiring junction box. If using conduit, use a
UL-listed/CSA-certified conduit connector.
If connecting dishwasher with a power supply cord:
• Use Power Supply Cord Kit (Part Number 4317824) marked
for use with dishwashers. Kit contents include:
• Voltex, Inc., UL listed 16 gauge 3 wire power supply cord
with 3 prong grounded plug.
• Neer C-500 _/_"strain relief.
• 3 wire connectors.
• Part No. 302797 grommet.
Follow the kit instructions for installing the power supply cord.
• Power supply cord must plug into a mating three prong,
grounded outlet, located in the cabinet next to the dishwasher
opening. Outlet must meet all local codes and ordinances.
IMPORTANT: If you plan to install a garbage disposer, an
additional separate 120-volt, 60 Hz, AC-only, 15 or 20 amp fused
electrical supply is required.
Use the new drain hose supplied with your dishwasher. If this
is not long enough, use a new drain hose with maximum
length of 12 ft (3.7 m) that meets all current AHAM/IAPMO test
standards, is resistant to heat and detergent, and fits the
1" (2.5 cm) drain connector of the dishwasher.
Connect drain hose to waste tee or disposer inlet above drain
trap in house plumbing and 20" (50.8 cm) minimum above the
floor. It is recommended that the drain hose either be looped
up and securely fastened to the underside of the counter, or
be connected to an air gap.
Use a drain air gap if the drain hose is connected to house
plumbing lower than 20" (50.8 cm) above the subfloor or floor.
Use 1/2"(1.3 cm) minimum I.D. drain line fittings.
SAVE THESE iNSTRUCTIONS
Contact a qualified electrician.
Ensure that the electrical installation is adequate and in
conformance with all national and local codes and ordinances.
You must have:
• 120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply.
• Copper wire only.
We recommend:
• A time-delay fuse or circuit breaker.
• Aseparate circuit.
6
INSTALLATION INSTRUCTIONS
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
2. Turn off water supply.
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
2. Drill 11/2'' (3.8 cm) diameter holes for drain and water hoses
and electrical wiring as shown. Holes should be placed
1/2"(1.3 cm) from back wall.
.4 1/2"
(1.3 cm)
A. Choose left-hand or right-hand drain and water hose route.
B. Choose left-hand or right-hand electric wire route.
3.
Install mounting brackets 17" (43.2 cm)from floor using
screws provided. If needed, drill V8"pilot holes in cabinet.
1. Read valuable information on exterior of shipping box before
opening.
2. Remove shipping materials, tape and film from the
dishwasher. Remove parts package from inside the
dishwasher.
1.
To ensure minimum clearance dimensions exist:
............................ ................_;_
• Measure the distance from the cabinet countertop to the
floor and ensure 333/4'' (85.7 cm) minimum height.
• Measure the distance from the front of the cabinet to the
back wall and ensure 24" (61 cm) minimum depth.
• Measure the distance from the left-hand side to the right-
hand side of opening and ensure 231/2'' (59.7 cm) minimum
width.
17"
(43.2 crn)
4. Decide which dishwasher-to-counter attachment method will
be used.
Option 1: Solid surface countertop installation
• Install second set of mounting brackets 331/2'' (85 cm) from
floor. If needed, drill 1/8"pilot holes in cabinet.
PREPARE DISHWASHER
Option 2:Wood countertop installation
• Prepare dishwasher by folding over tabs located on the top
front as shown.
Tip Over Hazard
Do not open dishwasher drawer until inside cabinet
opening.
Doing so can result in death or serious injury.
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
1. Measure cabinet opening height from floor to bottom of
countertop.
H
2.
Place corner packaging on the floor and place dishwasher on
its back.
3.
Adjust leveling legs based on the cabinet opening
measurement and the chart below.
8
H
33_" (85.7 cm)
34" (86.3 cm)
34 _" (86.7cm)
34¼" (87cm)
34%" (87.3 cm)
4.
Place dishwasher in upright position.
:X
:0"
: _" (0.3 cm)
:¼" (0.6 cm)
:%" (1 cm)
:V2" (1.3 cm)
:_.,o: t::_k::,,eck:::_ca /i,Ai:_:_:'::]g
H
34½" (87.6cm)
34%" (87.9 cm)
34 _" (88.3 cm)
34 %" (88.6 cm)
35" (88.9 cm)
:X
:%" (1.6 cm)
:_" (1.9 cm)
:%" (2.2 cm)
:1" (2.5 cm)
:1 _" (2.9 cm)
Option 2: Left-hand side utility route
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
Follow all national and local codes and ordinances for completing
electrical supply to cabinet.
Option 1: Right-hand side utility route
Route wire through 1V2"(3.81 cm) hole
located 8" (20.32 cm) above the floor.
After routing the electrical wire through the left-hand hole,
continue routing the wire along the left-hand side of cabinet to the
front of the opening.
......................... . j ............ _::!J: f!_O
1. Connect water supply line to watervalve on dishwasher.
Route wire through 1V2"(3.81 cm) hole
located 8" (20.32 cm) above the floor.
After routing the electrical wire through the right-hand hole, attach
the wire to back left-hand side of cabinet wall 8" (20.32 cm) above
the floor. Then continue routing the wire along the left-hand side of
cabinet opening to the front of the opening.
2.
Route water supply line and drain hoses based on your
cabinet requirements.
Option 1: Right-hand side utility access
• For right-hand routing, drain hoses are shipped in the correct
position. Place the water supply line in the clip as shown.
• Slide dishwasher partway into the cabinet opening. Allow for
access to the electrical terminal box.
1.
Connect water supply line to the water valve under the sink.
Option 2: Left-hand side utility access
• For left-hand routing, remove drain hoses from the clips in the
rear bracket as shown.
Route water supply line and drain hoses into the cabinet.
A. Hot water supply
2.
Slide clamps onto drain hoses (Figure A). Do not cut drain
hoses.
3.
Push hoses into Y drain connector until fully seated (Figure B).
Several "clicks" will be heard.
4.
Slide clamps into position (figures C and D).
A
B
10
C
½ J
D
5. Connectthedrainhoseusingoneofthefollowingoptions:
Option1:Wastedisposernodrainairgap
Option 3:Waste disposer and drain air gap
A ...........................,
B
A. For new construction, remove disposer plug.
B. Connect drain connector to waste disposer.
C. Tighten clamp.
Option 2: No waste disposer and drain air gap
S ................
A. Drain hose connector
B. Drain air gap
C. Waste
A. Drain hose connector
B. Drain air gap
C. Waste
Option 4: No waste disposer, no drain air gap
!
C
C
B
A. Drain hose connector
B. Cut drain connector
C. Waste
NOTE: Attach the drain hose connector to the water waste
line using the supplied hose clamp.
6=
Turn on water and check for leaks.
11
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
1.
Remove screw securing the electrical box cover. Remove
cover.
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Connect wires as follows using twist-on connectors sized to
connect direct wire to 16 gauge dishwasher wire.
Power supply wire: Terminal box wire:
white white
black black
2=
Route electrical wires through strain relief and secure to
electrical plate.
..... ;_U_"tC ""<".<-m
ground wire
ground connector
4. Attach ground wire to the green ground screw.
\
\
\
A. Attach ground wire to green screw.
B. Attach white and black wires.
12
5, Reinstall electric box cover with all wires contained inside the
terminal box.
1. Open bottom drawer.
2. Push in clips and slide rails back 5" (12.7 cm).
\\
\\
5. Check left to right level by placing the level on the top of the
drawer. Check front to back level by placing level on the slide
rails.
T_
-....
6,
Adjust legs with a 3/le"socket wrench to level the dishwasher.
3. Lift drawer off slide rails. Place drawer off to the left on
covering. Slide rails into dishwasher.
4. Slide the dishwasher into position in the cabinet opening.
Check to ensure that the drain hose and electrical wiring are
not kinked.
A. Adjust legs.
7,
Rest trim strip on floor and mark trim at the top of the frame
flange height. Pick the closest groove to the mark. If the mark
%
is between two grooves, choose the groove that makes the
trim strip the shortest. On a covered surface, cut the trim strip
at the selected groove. Pull dishwasher back out of cabinet
opening about 6" (15.24 cm).
13
8. Attach the toe kick bracket to the frame. 11. Place flexible side trim strips on both sides as shown.
9. Place trim strip into toe kick bracket.
12. Slide the dishwasher back into position in the cabinet
opening. Check to ensure that the drain hose and electrical
wiring are not kinked.
1.
Remove top drawer (same procedure as followed to remove
bottom drawer) and set drawer on bottom drawer separated
with corner packaging.
10. Attach toe kick bracket on the opposite side.
2.
Attach dishwasher to the lower cabinet mounting bracket
(installed earlier).
\
A
14
A. Attach dishwasher to lower cabinet mounting bracket.
3. Attach dishwasher to upper cabinet mounting brackets.
Option 1: Solid surface countertop
• Attach dishwasher to the side cabinet mounting brackets
(installed earlier).
A
//
A.Attach dishwasher toside cabinet mounting brackets.
Option 2: Wood countertop
• Attach the dishwasher to the countertop using the folded over
mounting tabs located on the top of the dishwasher.
2. Pull slide rails forward until they snap into position.
3. Push top drawer in and repeat above steps for bottom drawer.
4. In the cabinet under the sink, coil excess drain hose and wrap
with a zip tie. Plug in dishwasher or reconnect the power.
A
A.Attach dishwasher to countertop using folded over mounting tabs.
1. Pull top drawer slide rails out and set top drawer on slide rails.
5. Select the Rinse Only cycle and press START/RESUME. Allow
the dishwasher to fill, rinse and drain. Check for leaks. If leaks
are found, secure the connection and repeat this step.
If you need Assistance or Service:
Please reference the "Assistance or Service" section of the User
Instructions or contact the dealer from whom you purchased your
dishwasher.
15
Loading...