KitchenAid KUDH03DTBL2, KUDH03DTSS2, KUDD03STWH0, KUDD03STSS0, KUDD03STBL0 Installation Guide

...

I_itchen_kid _

INSTALLATION INSTRUCTIONS

DRAWER DISHWASHER

INSTRUCCIONES DE INSTALACION

DE LA LAVAVAJILLAS DE CAJON

INSTRUCTIONS D'INSTALLATION

LAVE-VAISSELLE A DOUBLE TIROIR

Table of Contents/Jndice/Table des matieres .................................................................. 2

iMPORTANT:

Save for local electrical inspector's use. Installer: Leave installation instructions with the homeowner.

Homeowner: Keep installation instructions for future reference.

IMPORTANTE:

Guarde para tenerlas a disposici6n del inspector de electricidad local. Instalador: Deje las instrucciones de instalaci6n con el propietario.

Propietario: Conserve las instrucciones de instalaci6n para referencia futura.

iMPORTANT :

Conserver pour consultation par I'inspecteur local des installations 61ectriques. Installateur : Remettre les instructions d'installation au propri6taire.

Propri6taire : Conserver les instructions d'installation pour r6f@ence ult@ieure.

W10216167A

TABLE OF CONTENTS

DISHWASHER SAFETY ........................................................................... 3

INSTALLATION REQUIREMENTS ......................................................... 4

Electrical Requirements ........................................................................ 6

Drain Requirements .............................................................................. 6

INSTALLATION INSTRUCTIONS ........................................................... 7

Unpack Dish Drawer ............................................................................. 7

Prepare Cabinet Opening ..................................................................... 7

PREPARE DISHWASH ER ....................................................................... 8

Route Electrical Wiring .......................................................................... 9

Route Water Supply Line and Drain Hose ............................................ 9

INDICE

SEGURIDAD DE LA LAVAVAJILLAS ................................................... 18

REQUlSITOS DE INSTALACION .......................................................... 19

Requisitos del suministro de agua ..................................................... 20

Requisitos electricos ........................................................................... 21

Requisitos de desagQe ....................................................................... 22

INSTRUCCIONES DE INSTALACION .................................................. 22

Desempaque el caj6n para platos ...................................................... 22

Prepare la abertura del armario .......................................................... 22

PREPARE LA LAVAVAJILLAS .............................................................. 23

Dirija el cableado electrico .................................................................. 24

Dirija la linea de suministro de agua y la manguera de desagQe ....... 25

Connect Water Supply Line and Drain Hoses ................................... 10

Make Electrical Connection ................................................................ 12

Install Trim Pieces and Level Dishwasher .......................................... 13

Secure the Dish Drawers .................................................................... 14

Complete Installation .......................................................................... 15

CUSTOM PANEL INSTALLATION INSTRUCTIONS .......................... 16

Preparing Custom Panels ................................................................... 16

Install Panel Fasteners ........................................................................ 17

Mount the Custom Panel .................................................................... 17

Conecte la linea de suministro de agua y las

mangueras de desagOe ...................................................................... 26

Conexi6n del suministro el_ctrico ...................................................... 27

Instale las piezas del marco y nivele la lavavajillas ............................ 28

C6mo asegurar los cajones de lavado ............................................... 30

Complete la instalaci6n ...................................................................... 31

INSTRUCCIONES DE INSTALACION DE LOS

PANELES A LA MEDIDA ....................................................................... 32

Paneles de los cajones a la medida ................................................... 32

Preparaci6n de los paneles a la medida ............................................ 32

C6mo instalar los sujetadores del panel ............................................ 33

C6mo montar el panel a la medida .................................................... 33

TABLE DES MATERES

SleCURITle DU LAVE-VAISSELLE ........................................................ 34

EXIGENCES D'INSTALLATION ............................................................ 35

Exigences d'emplacement ................................................................. 36

Specifications de I'alimentation en eau.............................................. 36

Specifications _lectriques ................................................................... 37

Specifications de la vidange ............................................................... 37

INSTRUCTIONS D'INSTALLATION ..................................................... 38

Deballer le tiroir & vaisselle ................................................................. 38

Amenagement de la cavit6 d'encastrement du placard .................... 38

PRlePARATION DU

LAVE-VAISSELLE .................................................................................. 39

Acheminement du c&blage electrique ................................................ 40

Acheminement du conduit d'alimentation

en eau et du tuyau de vidange ........................................................... 41

Raccordement du conduit d'alimentation en

eau et des tuyaux de vidange ............................................................ 42

Raccordement electrique ................................................................... 43

Installation des garnitures et reglage de

I'aplomb du lave-vaisselle .................................................................. 44

Fixation des tiroirs &lave-vaisselle ..................................................... 46

Achever I'installation ........................................................................... 47

INSTRUCTIONS D'INSTALLATION DU

PANNEAU PERSONNALISleS .............................................................. 47

Preparation des panneaux personnalises .......................................... 48

Installation des dispositifs de fixation de panneau ............................ 48

Montage du panneau personnalise ........................................................ 48

DISHWASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using the dishwasher, follow basic precautions, including the following:

m Read all instructions before using the dishwasher. m Use the dishwasher only for its intended function.

m Use only detergents or rinse agents recommended for use

in a dishwasher, and keep them out of the reach of children.

m When loading items to be washed:

1) Locate sharp items so that they are not likely to damage the door seal; and

2) Load sharp knives with the handles up to reduce the risk of cut-type injuries.

m Do not wash plastic items unless they are marked

"dishwasher safe" or the equivalent. For plastic items not so

marked, check the manufacturer's recommendations.

m Do not touch the heating element during or immediately

after use.

m Do not operate the dishwasher unless all enclosure panels

are properly in place.

SAVE THESE INSTRUCTIONS

Do not open dishwasher drawer until inside cabinet opening. Doing so can result in death or serious injury.

m Do not tamper with controls. m Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

m To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

m Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using the dishwasher turn on all hot water faucets and let the

water flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

m Remove the door or lid to the washing compartment

when removing an old dishwasher from service or

discarding it.

Tip Over Hazard

You need to:

• Slowly open dishwasher drawer while someone grasps the rear of the dishwasher. Remove shipping materials. Close

dishwasher drawer. Latch the dishwasher drawer shut.

• Observe all governing codes and ordinances.

• Install this dishwasher as specified in these instructions.

• Have everything you need to properly install dishwasher.

• Contact a qualified installer to ensure that dishwasher is installed to meet all electrical and plumbing national and local

codes and ordinances.

INSTALLATION REQUIREMENTS

h ¸_ ai_d ¸_¸_........._.....

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed

here. Tools needed

• Pliers

• Phillips screwdriver

• Flat-blade screwdriver

• ¾e" and 1¼,,nut drivers or hex sockets

• Measuring tape or ruler

• 1Y2" hole saw bit

Parts needed

• 10" adjustable wrench

• Utility knife

• Level

• Electric drill

• V8" drill bit

• Security T-20 TORX®t driver (if installing custom

front panels)

Parts Supplied

Check that all parts are included.

C D

A. 72" (182.9 cm) flexible water supply line B. Zip tie C.Appropriate sized UL listed wire connectors (2) D. Handle (if installing custom front panels) E. Custom panel (if instalfing custom front panels)

1-®TORX is a registered trademark of Acument Intellectual Properties, LLC

IMPORTANT: Observe all governing codes and ordinances. Failure to meet codes and ordinances could lead to fire or

electrical shock. Proper installation is your responsibility.

• Contact a qualified installer to ensure that the dishwasher is installed to meet all electrical and plumbing national and local

codes and ordinances.

• Install the dishwasher as specified in these instructions.

A. _" UL fisted strain refief B. 1.25" hose clamp

C. Mounting bracket screws (8) D. Unit mounting screws (4)

E. Ydrain connector F. Mounting brackets (4)

G. Drain connector spring

clamps (2)

H. Trim strips (2)

I. Toe kick brackets (2)

J. Toe kick bracket screws (2)

K. Toe kick trim

L. Panel fasteners (on some

models [2])

M. TORX®_screws (on some

models [10])

......... [i!*..................................

• Have everything you need to properly install dishwasher.

• Keep the dishwasher and water lines leading to dishwasher from freezing. Damage from freezing is not covered by the

warranty.

• This dishwasher is manufactured for indoor use only.

• Install and level dishwasher on a floor that will hold the weight, and in an area suitable for its size and use.

Product Dimensions

191/4" 11/2"

(48.9 cm) (3.75 cm)

Installation Clearances

Cutout dimensions

231/2''

"(59.7 cm)

cm)

33¾"

(85.7 cm)

Preferred utililtyarea

A. Choose left-hand or fight-hand drain and water connection route.

B. Choose left-hand or fight-hand electric connection route.

NOTE: All holes should be drilled at 11/2"(3.8 cm) diameter.

A hot water line with 20-120 psi (138-862 kPa) water pressure. • Flexible stainless steel braided fill line (1/2" minimum plastic 120°F (49°C) water temperature at dishwasher, tubing is not recommended).

_e q _:u:£e:+sse:+:l_5

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

GROUNDING iNSTRUCTiONS

For a grounded, cord-connected dishwasher: The dishwasher must be grounded. In the event of a

malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least

resistance for electric current. The dishwasher is equipped with a cord having an equipment-grounding

conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is installed and

grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the

equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or

service representative if you are in doubt whether the dishwasher is properly grounded. Do not modify the

plug provided with the dishwasher; if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

For a permanently connected dishwasher: The dishwasher must be connected to a grounded

metal, permanent wiring system, or an equipment- grounding conductor must be run with the circuit

conductors and connected to the equipment- grounding terminal or lead on the dishwasher.

If direct wiring dishwasher:

• Use flexible, armored or nonmetallic sheathed, copper wire with grounding wire that meets the wiring requirements for

your home and local codes and ordinances. Use strain relief method provided with house wiring junction

box or install a UL-listed/CSA-certified clamp connector to the house wiring junction box. If using conduit, use a UL-listed/CSA-certified conduit connector.

If connecting dishwasher with a power supply cord:

• Use Power Supply Cord Kit (Part Number 4317824) marked for use with dishwashers. Kit contents include:

• Voltex, Inc., UL listed 16 gauge 3 wire power supply cord

with 3 prong grounded plug.

• Neer C-500 _/_"strain relief.

• 3 wire connectors.

• Part No. 302797 grommet. Follow the kit instructions for installing the power supply cord.

• Power supply cord must plug into a mating three prong, grounded outlet, located in the cabinet next to the dishwasher opening. Outlet must meet all local codes and ordinances.

IMPORTANT: If you plan to install a garbage disposer, an additional separate 120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply is required.

Use the new drain hose supplied with your dishwasher. If this is not long enough, use a new drain hose with maximum length of 12 ft (3.7 m) that meets all current AHAM/IAPMO test

standards, is resistant to heat and detergent, and fits the 1" (2.5 cm) drain connector of the dishwasher.

Connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20" (50.8 cm) minimum above the

floor. It is recommended that the drain hose either be looped up and securely fastened to the underside of the counter, or be connected to an air gap.

Use a drain air gap if the drain hose is connected to house plumbing lower than 20" (50.8 cm) above the subfloor or floor.

Use 1/2"(1.3 cm) minimum I.D. drain line fittings.

SAVE THESE iNSTRUCTIONS

Contact a qualified electrician. Ensure that the electrical installation is adequate and in

conformance with all national and local codes and ordinances. You must have:

• 120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply.

• Copper wire only. We recommend:

• A time-delay fuse or circuit breaker.

• Aseparate circuit.

INSTALLATION INSTRUCTIONS

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

1. Disconnect power.

2. Turn off water supply.

Excessive Weight Hazard

Use two or more people to move and install dishwasher.

Failure to do so can result in back or other injury.

2. Drill 11/2'' (3.8 cm) diameter holes for drain and water hoses and electrical wiring as shown. Holes should be placed 1/2"(1.3 cm) from back wall.

.4 1/2"

(1.3 cm)

A. Choose left-hand or right-hand drain and water hose route.

B. Choose left-hand or right-hand electric wire route.

Install mounting brackets 17" (43.2 cm)from floor using screws provided. If needed, drill V8"pilot holes in cabinet.

1. Read valuable information on exterior of shipping box before opening.

2. Remove shipping materials, tape and film from the dishwasher. Remove parts package from inside the

dishwasher.

To ensure minimum clearance dimensions exist:

............................ ................_;_

• Measure the distance from the cabinet countertop to the

floor and ensure 333/4'' (85.7 cm) minimum height.

• Measure the distance from the front of the cabinet to the

back wall and ensure 24" (61 cm) minimum depth.

• Measure the distance from the left-hand side to the right-

hand side of opening and ensure 231/2'' (59.7 cm) minimum width.

17"

(43.2 crn)

4. Decide which dishwasher-to-counter attachment method will be used.

Option 1: Solid surface countertop installation

• Install second set of mounting brackets 331/2'' (85 cm) from floor. If needed, drill 1/8"pilot holes in cabinet.

PREPARE DISHWASHER

Option 2:Wood countertop installation

• Prepare dishwasher by folding over tabs located on the top front as shown.

Tip Over Hazard

Do not open dishwasher drawer until inside cabinet

opening. Doing so can result in death or serious injury.

Excessive Weight Hazard

Use two or more people to move and install dishwasher.

Failure to do so can result in back or other injury.

1. Measure cabinet opening height from floor to bottom of countertop.

Place corner packaging on the floor and place dishwasher on its back.

Adjust leveling legs based on the cabinet opening measurement and the chart below.

H 33_" (85.7 cm)

34" (86.3 cm) 34 _" (86.7cm) 34¼" (87cm) 34%" (87.3 cm)

Place dishwasher in upright position.

:0"

: _" (0.3 cm) :¼" (0.6 cm) :%" (1 cm) :V2" (1.3 cm)

:_.,o: t::_k::,,eck:::_ca /i,Ai:_:_:'::]g

H 34½" (87.6cm)

34%" (87.9 cm) 34 _" (88.3 cm) 34 %" (88.6 cm) 35" (88.9 cm)

:X :%" (1.6 cm)

:_" (1.9 cm) :%" (2.2 cm) :1" (2.5 cm) :1 _" (2.9 cm)

Option 2: Left-hand side utility route

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

Follow all national and local codes and ordinances for completing electrical supply to cabinet.

Option 1: Right-hand side utility route

Route wire through 1V2"(3.81 cm) hole

located 8" (20.32 cm) above the floor.

After routing the electrical wire through the left-hand hole,

continue routing the wire along the left-hand side of cabinet to the front of the opening.

......................... . j ............ _::!J: f!_O

1. Connect water supply line to watervalve on dishwasher.

Route wire through 1V2"(3.81 cm) hole

located 8" (20.32 cm) above the floor.

After routing the electrical wire through the right-hand hole, attach the wire to back left-hand side of cabinet wall 8" (20.32 cm) above

the floor. Then continue routing the wire along the left-hand side of cabinet opening to the front of the opening.

Route water supply line and drain hoses based on your cabinet requirements.

Option 1: Right-hand side utility access

• For right-hand routing, drain hoses are shipped in the correct position. Place the water supply line in the clip as shown.

• Slide dishwasher partway into the cabinet opening. Allow for access to the electrical terminal box.

Connect water supply line to the water valve under the sink.

Option 2: Left-hand side utility access

• For left-hand routing, remove drain hoses from the clips in the rear bracket as shown.

Route water supply line and drain hoses into the cabinet.

A. Hot water supply

Slide clamps onto drain hoses (Figure A). Do not cut drain hoses.

Push hoses into Y drain connector until fully seated (Figure B). Several "clicks" will be heard.

Slide clamps into position (figures C and D).

½ J

5. Connectthedrainhoseusingoneofthefollowingoptions:

Option1:Wastedisposernodrainairgap

Option 3:Waste disposer and drain air gap

A ...........................,

A. For new construction, remove disposer plug. B. Connect drain connector to waste disposer. C. Tighten clamp.

Option 2: No waste disposer and drain air gap

S ................

A. Drain hose connector

B. Drain air gap

C. Waste

A. Drain hose connector B. Drain air gap

C. Waste

Option 4: No waste disposer, no drain air gap

A. Drain hose connector B. Cut drain connector C. Waste

NOTE: Attach the drain hose connector to the water waste line using the supplied hose clamp.

Turn on water and check for leaks.

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

Remove screw securing the electrical box cover. Remove cover.

Electrical Shock Hazard

Electrically ground dishwasher.

Connect ground wire to green ground connector in

terminal box.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

3. Connect wires as follows using twist-on connectors sized to connect direct wire to 16 gauge dishwasher wire.

Power supply wire: Terminal box wire:

white white

black black

Route electrical wires through strain relief and secure to electrical plate.

..... ;_U_"tC ""<".<-m

ground wire

ground connector

4. Attach ground wire to the green ground screw.

A. Attach ground wire to green screw. B. Attach white and black wires.

5, Reinstall electric box cover with all wires contained inside the

terminal box.

1. Open bottom drawer.

2. Push in clips and slide rails back 5" (12.7 cm).

5. Check left to right level by placing the level on the top of the drawer. Check front to back level by placing level on the slide rails.

-....

Adjust legs with a 3/le"socket wrench to level the dishwasher.

3. Lift drawer off slide rails. Place drawer off to the left on covering. Slide rails into dishwasher.

4. Slide the dishwasher into position in the cabinet opening. Check to ensure that the drain hose and electrical wiring are

not kinked.

A. Adjust legs.

Rest trim strip on floor and mark trim at the top of the frame flange height. Pick the closest groove to the mark. If the mark

is between two grooves, choose the groove that makes the trim strip the shortest. On a covered surface, cut the trim strip at the selected groove. Pull dishwasher back out of cabinet

opening about 6" (15.24 cm).

8. Attach the toe kick bracket to the frame. 11. Place flexible side trim strips on both sides as shown.

9. Place trim strip into toe kick bracket.

12. Slide the dishwasher back into position in the cabinet opening. Check to ensure that the drain hose and electrical

wiring are not kinked.

Remove top drawer (same procedure as followed to remove bottom drawer) and set drawer on bottom drawer separated with corner packaging.

10. Attach toe kick bracket on the opposite side.

Attach dishwasher to the lower cabinet mounting bracket (installed earlier).

A. Attach dishwasher to lower cabinet mounting bracket.

3. Attach dishwasher to upper cabinet mounting brackets. Option 1: Solid surface countertop

• Attach dishwasher to the side cabinet mounting brackets (installed earlier).

A.Attach dishwasher toside cabinet mounting brackets.

Option 2: Wood countertop

• Attach the dishwasher to the countertop using the folded over mounting tabs located on the top of the dishwasher.

2. Pull slide rails forward until they snap into position.

3. Push top drawer in and repeat above steps for bottom drawer.

4. In the cabinet under the sink, coil excess drain hose and wrap with a zip tie. Plug in dishwasher or reconnect the power.

A.Attach dishwasher to countertop using folded over mounting tabs.

1. Pull top drawer slide rails out and set top drawer on slide rails.

5. Select the Rinse Only cycle and press START/RESUME. Allow the dishwasher to fill, rinse and drain. Check for leaks. If leaks

are found, secure the connection and repeat this step.

If you need Assistance or Service: Please reference the "Assistance or Service" section of the User

Instructions or contact the dealer from whom you purchased your dishwasher.

+ 35 hidden pages